Indian Tenders

Tender Notice

TDR 50000528
Tendering Authority Meerut Municipal Corporation
Tender No 7071/SNV-15FFC-86T /2025
Tender ID 2025_NNMEE_1053448_10
Tender Brief Tender For Ward-75 Cc Road Work From Noornagar Chowk To Usmania Property - M-150 Brick Work In 1:4One Cement And Four Course Sand . Mortar In Foundation And Plinth Including Supply Of All Materials Labour, T & P Etc Required For Proper Complition Of The W
City meerut
State Uttar Pradesh
Document Fees INR 5900 /-
EMD INR 772285.0 /-
Tender Value INR 1.14 Crore /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender For Ward-75 Cc Road Work From Noornagar Chowk To Usmania Property - M-150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the workS.I No.305 a 2 12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A) 3 Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a) 4 providing laying spreading and compactiog graded stone aggregate to wet mix macadam including premixing the material with water at OMC in mechanical mix plant,carriage to mixed material by tipper to site, laying in uniform compacted layers of 100 mm thick with paver in sub base/base course on well prepared surface and compactong with vibratory roller to achiver the desired density including all T&P taxes & labour cess etc as directed by engineer in charges etc all. complete (Ref.to Mort&H Specification No 401) 5 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels.rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant,dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)Same as above but when thikness of CC is less then 20 cm. (without dowel Bar) 6 Supplying & fixing 80 mm thick recast cement concreteI shapeinter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than40MPa and weight 4.5 kg per no.including cost of meterial, with blanket layer of 4.00cm thick fine sandincluding labour T& P etc required for proper completion of the work as directed by Engineer-in-charge.As S.I. No New Item - 17 colour tiles all work comp 7 Trimix for C.C. road etc.including hire & fuel charges of concrete floter + all comp.of work 8 Providing& appling concrete hardner on C.C. roadtop surfaceetc all comp.of work 9 Providing and filling in position rubbererized bitumen hot sealing compound for sealing of expansion joint in road /pavement including Groov cutting as per norms etc All as per direction of ingineer in charge 10 Supply & fixing of sign board at site proper completion of work

Key Dates

Publish Date 04-07-2025
Last Date of Bid Submission 28-07-2025
Tender Opening Date 29-07-2025

Contact Information

Company Name Meerut Municipal Corporation
Contact Person CHIEF ENGINEER
Address NNM

Other Detail

Information Source https://etender.up.nic.in
Download FileName File Description File Size
Download NNMT2.pdf Tender Documents 0 KB
Download Tendernotice_1.pdf Tender Documents 0 KB
Download 8502a0b7-46f2-4fae-8c89-92c2a71edf65.html Tender Documents 0 KB
Download 10.pdf Tender Documents 0 KB
Download BOQ_1915619.xls Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.