|
Tender For Miscellaneous Repairing Work On Banswara Ratlam Road - 1 Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2 2 Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and MoRTH specifications Clauses 1300, 1500 3 Stone masonry in cement mortar 1:3 for parapet complete as per drawing and MoRTH specifications Clauses 1400 Random Rubble Masonary 4 Plastering with cement mortar (1:3) 15 mm thick on brickwork in parapet asper MoRTH specifications Clauses 1312.4 5 Providing and laying parapet with PCC M 15 as per drawing & MoRTHspecifications Clauses 1700 & 2300 Nominal mix (1:2.5:5) 6 Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with syntheticenamel paint in all shades on new, plastered / concrete surfaces as perdrawing and MoRTH Specification Clause 801 7 Painting lines, dashes, arrows, etc. on roads in two coats on new work withready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dustand other foreign matter, demarcation at site and traffic control as perdrawing and MoRTH Specification Clause 803 8 Construction of speed breaker of IRC standard having width of 3.70M including cost of stone aggregate (50-25mm) size hire charges for roller for consolidation and compaction and other machines required for the work (including cost of bitumen) 9 Providing and fixing of road stud 100 x 100 mm die cast in aluminium,resistant to corrosive effect of salt and grit, fitted with lense reflectors,installed in concrete or asphaltic surface by drilling holes 30 mm upto adepth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar,all as per BS:873 (Part 4) 1973.as per MoRTH Specification Clause 804. 10 Marking Centre Line and stop lines etc. on road as per IRC pattern withthermoplastic paint of approved quality and make with 8% glass beads laidon the road surface at temperature 160 C with a special applicator machinecomplete with a special applicator machine complete with labour materialand traffic diversion arrangements 11 Repair of steel railing to bring it to original shape cleaning and repainting as per drawing and MoRTH specification Clause 1900. Steel Railing 12 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 600 mm circular 13 Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift up to 1.5 m and lead up to 1000 m as per MoRTH Specification Clause 301.3 14 Supply of ready made cold bituminous mixture for pot hole patching in pot holes in accordance with IRC:116-2014 specifications with IRC:116-2014 spccifications with 5.6%MC-800 Cut back Bitumen and suitable anti stripping agent with all lead and lift in 50 kg plastic lined sturdy bags complete in all respect as perdirection of engincer-in-charge including all transportation, stacking & taxes etc 15 Placing and compacting ready made cold bituminous mixture in pot holes duly prepared in accordance with IRC:116-2014 with Specifications with all lead and lift for placement at site complete in all respect as per Direction of Engineer-in-charge including all taxes etc. 16 Providing, laying, spreading and compacting graded stone aggregate to wet By Mechanical Means with all leadmix macadam specification including premixing the material with water atOMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper tosite, laying in uniform layers in sub-base/base course on a well preparedsub-base and compacting with smooth wheel roller of 80 to 100kN weight toachieve the desired density including lighting, barricading and maintenanceof diversion, etc as per Tables 400-12 & 400-13 and MoRTH SpecificationClause 406
|