|
| 1 | Dismantliy all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site etc. complete. a) In ground floor including roof. |
| 2 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof. |
| 3 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.a) In ground floor |
| 4 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.a) In ground floor |
| 5 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, In Grfloor. as per relevant IS codes. (i) Pakur Variety |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, In Gr floor. as per relevant IS codes. (i) Pakur Variety |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout (In Gr. Floor) |
| 8 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 9 | Reinforcement for reinforced concrete work inall sorts of structures including distribution bars, stirrups, ----------complete as per drawing and direction.(a) For works in foundation, basement and upto roof of Gr. floor ( Other Manufacturers) 1.2% of R.C.C valume |
| 10 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, -------- 3 mm. thick topping . Using grey cement (i) 35 mm. Thick |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering ------------------ concrete surface](ii) With 1:6 cement mortar (a) 15 mm thick plaster |
| 12 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE : Cement 0.152 cu.m. per 100 sq.m. |
| 13 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 14 | Supplying, fitting and fixing windows and ventilators with or ithoutintegrated grills conforming to IS 1038- ---------complete in all respect excluding glazing.(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] |
| 15 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 16 | Applying Exterior grade Acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer\"s specification and as per direction of theEIC. In Ground Floor: (a) One Coat |
| 17 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s ………. excluding the cost of primer.a) Normal Acrylic Emulsion |
| 18 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 19 | Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand------- on the surface, if necessary :On steel or other metal surface : |
| 20 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all ---------(Spun Yarn,Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes: (i) 75 mm. Dia |
| 21 | Add CGST 9% |
| 22 | Add SGST9% |
| 23 | Add : Labour Cess @1% |