|
Tender For Day To Day Repair And Maintenance Work In Govt Hospital Sirohi - 1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 25mm to 40mm. 3 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 4 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 5 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 6 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 7 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work 8 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 750 (-do-) 9 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-) 10 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size600 mm X 600mm 11 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. 12 Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M 13 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. 14 Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 15 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 16 Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. 17 Brick work with F.P.S. bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 18 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 19 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 20 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mmthickwith20mmthicknominalsizeaggregate. 21 Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm 22 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete 23 Providing and fixing fully panelled/partly panelled/double leaf shutter frames for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - A and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete :30 mm thick Ghana wood grade I 24 Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roofslabs/terrace/balconies/parapet wall etc.with following method/specification:Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work. 25 Construction of open Drain with 112mm thick brick masonry in CM 1:4 Semi circular S.W. glazed channel (confirming to IS Standards) fixed with cement mortar 1:1 over a bed of 100mm thick C.C. 1:5:10, filling of edged with M-15 grade C.C. flooring, 12mm cement plaster 1:4, over all exposed faces, excavation & disposal of earth with in a lead of 50 mtr complete as per approved drawings : 250 mm drain,225mm Av. depth width 25 Cm S.W. glazed channel. 26 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) 27 Supply of Sanitory Items Manpower Supply Fitter (Grade 1) 28 S.W. gully trap P type 150x100 mm 29 R.C.C. pipes NP2 class 300 mm dia 30 P.V.C Waste pipe with C.Pnut 40 mm 31 premium qulaity WVC Urinal Flat Back (small) size 440x265x315 mm. 32 C.P. brass Urinal Flush pipe set For 1 Urinals. 33 Coloured Orissa pattern W.C. pan 580x440 mm 34 Coloured Pedestal type W.C. pan (European type) 35 Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) 36 Premium quality water closet Seat Cover Solid PVC (ISI marked) grade-I White for EWC. 37 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. 38 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. 39 C.P. Pillar Cock 15 mm nominal size 40 C.P. Brass bibcock 15 mm 41 C.P. Brass long body bibcock 15 mm 42 C.P. Brass angle valve 15 mm 43 Stainless steel kitchen sink Size 18x16x6 inches 44 Jet spray for water closet with C.P. Copper Tube flange 45 GratingStainless Steel Sheet size 125mm dia. 46 PVC Tank Cover 300 Lt. capacity 47 PVC Tank Cover 500 Lt. capacity 48 PVC Tank CoverAbove 500 Lt. capacity 49 G.I. pipes 15 mm dia (B Class) 50 G.I. pipes 25 mm dia (B Class) 51 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. 52 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. 53 WVC (10 litres) low level flushing cistern cover only. 54 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 55 U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 75 mm dia. 56 U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia. 57 UPVC bend 87.5o 75 mm bend 58 UPVC bend 87.5o 110 mm bend 59 UPVC pipe clip 75 mm bend 60 UPVC pipe clip 110 mm bend 61 Carpentry SupplyStainless steel screws 50 mm 62 Manpower Supply Carpenter 1st Class 63 Stainless steel screws 40 mm 64 Stainless steel screws 30 mm 65 Stainless steel screws 20 mm 66 Brass handles 100 mm with plate 150x32 mm 67 Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm 68 Oxidised mild steel sliding door bolt 300x16 mm 69 Strips-Aluminium fluted 3.15mm thick and 150mm wide 70 Brass cupboard lock 6 levers (best make of approved quality) 65 mm size 71 0.6 mm mica 72 Brass curtain rod 25 mm dia 1.25 mm thick 73 IS 710- 1976 marked 12 mm thick commerical ply 74 Manpower Supply Mason (average) 75 Manpower Supply Beldar 76 Assistant Fitter or 2nd class Fitter 77 Supply of Portland Cement 78 Supply of Coarse sand (zone III) 79 Supply of Stone Aggregate (Single size) : 20 mm nominal size 80 F.P.S. bricks class designation 75
|