|
Tender For Repair/Maintenance Of Otm/Md Accommodation Of Mh, Mdc & Records At Ranikhet Under Ge Ranikhet.; 1 Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed. 2 S&F 0.63mm thick galvanised corrugated MS sheeting (CGI sheet roofing) with two corrugation side laps,with 120gm Zinc (Spelter) coating per Sqm both sides inclusive fixed with coach screws and washers as in roofs etc all as specified 3 S&F 0.63mm thick plain galvanised MS sheeting using grade-O sheets with 120gm Zinc (Spelter) coating Per Sqm both sides inclusives, as in roof, ridges, hips, valley gutters, drip and straight flashing complete all as specified and directed. 4 S&FPre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ 150) as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed 5 S&FPre painted galvalume aluminium zinc coating GI based Plainsteel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed 6 Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed. 7 M&L for brick work with sub class B bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 all as specified and directed. 8 M&L for precast cement concrete block masonery with solid block of cement concrete1:3:6 type C-1 ( using20 mm graded stone aggregate)exc 10 cm in width and setting in CM 1:6completeall as specified and directed by Engr-in- charge 9 Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed. 10 M&L for rendering 15 mm thickreadymade plaster on inner/outer walls by adding 17-19% of potable water by weight of material for thickness above 15mm it is recommended to be applied in multiple layers. ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 days 10-12 Mpa/Bulk density 1500-1600 Kg/m3. (Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 Mtr ht all as specified and directed) 11 M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete. 12 M&L for preparation of Newplastered surfaces & applying a layer of Birla puttyon wall surfaces including cornics etc for proper levelling of plaster and two coat of oil emulision distemper complete all as specified and directed. 13 M&L three coats of white wash on walls including all preparation complete 14 M&L preparation ofold surfacesincluding cornices etc and one coat of oil bound distemper complete all as specified and directed. 15 M&L for preparation of old decorated plastered or unplastered surfaces of walls incl cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasyspots and applyingone coat of cement base paint complete all as specified and directed. 16 M&L for preparation of old plastered surfaces & applying a layer of Birla puttyon wall surfaces including cornics etc for proper levelling of plaster and two coat of oil emulision paint complete all as specified and directed. 17 Dismantling of ceiling board (flbre pulp, insulation etc) or insulation boards/slabs/blankets any thickness, includingcover fillets complete all as specified and directed. 18 S&F of powder coated grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixedto walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length and butterfly clips, sizeof main tee shall be 28mmx24mmx0.3mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick incl4 mm thick E-Board Classic (Make-Everest) for insulation and accoustic purpose, 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface complete all as specified and directed.complete all as specified and directed. 19 S&F hollowwall liningdual colour consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete fixing arrangement icluding taking down old existing wooden panelling complete. 20 Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above groundlevel) complete all as specified and directed. 21 M&L for cement concrete 1:4:8 type D-2 (using 20mmgraded stone agg) as in foundation , filling and mass concretecomplete all as specified and directed. 22 M&L 40 mm thick PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in flooring finishing cement concrete even and smooth with using extra cement complete all as spd 23 Surface channel in concrete 1:3:6 (40 mm graded aggregate) for drain complete all as specified and directed. 24 Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as pecified and directed. concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.All as specified and directed. 25 M&L for 75mm thick cement concrete 1:3:6 type C-2(using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels. 26 M&L chequred tiles 300 x 300 x 25 mm coloured glossy finish rubber pressed moulded of approved pattern & shademakeas approved by GEas in floor over 15 mm thick screed bed or bedding layerin CM(1:4)and jointed complete all as specified and directed. 27 M&L interlockingtiles 75-80 mmcoloured rubber pressed glossy finish thickof approved pattern & shadeISI Marked orapproved by GEset jointed over 40 mm th fine sand cushion including sides are tappered 75 mm in width by PCC 1:3:6 type C1 (using 20mm graded crushed stone agg.) complete all as specified and directed. 28 Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. 29 Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed. 30 M&L for earth filling under floor including supply of suitable eath/ soft / disintrgrated rocks for filling from out side including spreading and levelling watering and well ramming in layers n. exc. 25 cm complete in hard / dense soil complete all as spd 31 M&L PCC 1:5:10 type E2 using 40mm graded aggregate as in sub base complete all as spd 32 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 33 M&L 300x450x7mm thick glazed ceramic digital tilescoloured incl ,design and pattern as approved fixed as in vertical surface etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match incl rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed. 34 M&Lcolour non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment incl 15mm thick screed bed in CM 1:6 complete all as spd 35 M&Lcolour non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.18 sqm but n. exc. 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigments incl 15mm thick screed bed in CM 1:6complete all as spd 36 M&Lcolour non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.18 sqm but n. exc. 0.38 sqm inskirting /dado etc set and jointed in neat cement slurry and pointed in white cement with colour pigments incl rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.complete all as spd 37 M&L 18 to 20 mm thick granitestone on stepsincluding rubbing and polishing and making hole for gas pipe and front portion rounded and chamfered complete including screed bedding 15 mm thick in CM 1:4 complete all as spd 38 S&F in repairs parquet flooring 8.3 mm thick hard board plank both side laminated with decorative surface and approvedby GElaid above the thermoplastic sheet complete all as spd 39 Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. 40 Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. 41 M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. 42 M&L for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. 43 S&F in repair 15mm dia bib tap long body CP, screwed for iron pipescomplete all as specified and directed 44 S&F angle cock 15 mm bore brasschromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface 45 S&F pillar taps 15 mm bore, brass chromium plated , screwed down high pressure with or without letter Hot or Cold with long screwed shanks and fly nut complete all as specified, fixed in repairs. 46 S&F bib tap standard of PTMT (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath fitting), any colour, screwed foriron pipe 15 mm bore pipe (minimum weight 90 gm) all as specified, fixed in repairs (Make : Prayag or Equivelent as approved) 47 S&F in repair polymer white (polypropeylene Delrin and ABS) lowlevel flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete, complete all as specified and directed. 48 S&F in repairs, 550x400mm vitreous China, wash hand basin , flat backwith pedestal excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste coupling complete all as specified and directed. 49 S&F vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etccomplete including making goodto floor complete all as specified and directed fixed in repairs. 50 Dismantling water tanks 500 ltrs capacitycomplete all as specifiedand directed. 51 Dismantling water tanks of any description, capacity exceeding 500 litres but not exceeding1000 liters complete. 52 S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag complete all as specified and directed. 53 S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag complete all as specified and directed. 54 S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe and fixed in repairs (min weight 210 gm). 55 S&F 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe and fixed in repairs (min weight 210 gm). 56 S&F PVC circular top cover suitable to rotational moulded polyethylene water storage tanks of 300 /500 litres capacity tanks of standard mares, with 6 mm dia nut and bolts on two ends of cover to act as hinge as will as locking arrangement for side opening 57 S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes,includingbedding in cement mortar to dwarf wall or including fixing cautilever brack etc and connecting union to pipe over all size 915mmx460mm bowl size 405mm x 354mm x 178mm as approved by GEcomplete all as specified and directed. 58 S&F PVC WHB waste pipe 32/40 mm dia compolete all as spd 59 S & F in repairs15 mm bore Fancy type chromium plated Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed. 60 S&F, 5.50 mm thick looking Mirror of selectedquality glass, size 60 cm x 45 cm, mounted on 6mm thick commercial plywood and fixed to wooden plugwithC.P. brass screws andcup washers with & including plastic fancy frame alround all as directed. 61 Taking down chowkats or frames with shutters (without taking off shutters from the frame)not exc 1.5 sqm each.& removing to or from store all as specifed & directed. 62 Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. 63 M&L prelam particle board 18/19mm exterior grade prelaminated one side with decorative choice and other side balancing white fixed with screw to timber frame workin cup board complete all as spd 64 M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 65 S&F factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedall as specified 66 S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., rs, edges of framing plain, chamfered complete all as specified and directed. 67 Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising ofPVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 68 Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thickcomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. 69 S&F aluminium powder coated door with shutter and frame of aluminium section sliding typeas per following specifications with and including round type aluminium handle, tower bolts, hinges, panes etc and as directed at site. Make Jindal or its equivalent approved make:- (a)DOOR FRAME :100 x 44 x1.6 mm section for complete frame. (b)DOOR SHUTTER : Top & bottom rail of 100x44x1.6 mm, middle rail of 83 x 44 x 1.6mm, both styles of 83 x 44 x 1.6 mm size shall be used. (c)GLASS PANE : 5mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc. (d) Jointing cleats, glazingclips, rubber packing,anodized aluminium snap beading, screws, anodized aluminium fittings such as 100mm long 03 Nos. hinges, aluminium handles , aluminium tower bolts ,and mortice lock 6 Levers etc complete all as specified and directed 70 M&L for taking downexisting aluminiumdoor shutter carefully without damage of glass panesincluding replacingaluminium clip , jointing clips, glazing clips, rubber packing, screws etc as reqd at site and refixing the same after complete repairsall as specified and directed( Note- any replacement of Aluminium rails or stiles if reqdto be replaced will be measured seperately ) 71 S&F in repairs double action floor spring hydraulicaly regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made brass other parts made of mild steel heavy duty and fixed complete all specified 72 S&F aluminium partition powder coated offrame of aluminium section44.45 x 44.45 x 1.6mm etcand 5 mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc.and as directed at site. Make Jindal or its equivalent approvedmake including taking down old userviceable wooden partition completeall as spd 73 S&F 100mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed. 74 S&F 150mm long Aluminium tower boltand fixed complete all as specified and directed. 75 S&F 125 mm size aluminium handle plate type anodised complete all as specified and directed. 76 S&F in repairs hydraulic door closer Aluminium ( Die cast) regulated designation No-3 universal type for door shutter complete all as spd 77 Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified 78 S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed. 79 S&F in repairsofgalvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. 80 M&L for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats ofsynthetic enamel paint over a coat of pink primer complete allas specified and directed. 81 M&L for plain cement concrete 1:3:6 type C-1 (using20mm graded stone aggregate) as in fixing of hold fast, bedblocks etc including necessary form work as required complete all as specified and directed. 82 Demolition and breaking up drains pipes(150mm size) salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed. 83 S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walland in floors complete all as specified and directed. 84 S&F of 75 mm bore PVC (SWR) pipe single socketed in as length with rubber ring as in vent pipe complete all as specified and directed 85 S&F in repairsof 110 mm dia PVC (SWR)bend complete all as specified and directed. 86 S&F in repairsof 75 mm dia PVC (SWR) bendcomplete all as specified and directed. 87 S&F brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed. 88 S&Fchromium plated Soap disk fixed to plug with chormium plated brass screws all as specified and directed 89 S & F 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with brackets complete all as specified. 90 S&F mild steel work as hold fasts, bands, straps, supports or stays for pipes eaves gutter including bolts ifrequired, hooks (stay), clamps and similar small articles, conforming toFe 310-0 or Fe 410-0 complete all as specifiedand directed. 91 S&F mild steel framed work such as purlin , truss, square tube , MS pole , grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, welded wire mesh and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. 92 M&L for preparation of old or previously treated wooden surfaces of any description,not otherwise descri- bed over 10cm width or girth and applying one coats ofsynthetic enamel paintcomplete allas specified and directed.. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. 93 S& Fin repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. 94 Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
|