|
Tender For Internal Electrification In 5 No. C Type Shops At Nmy Khatauli - Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm FRLSH PVC insulated multistrand single core copper earthwire drawn inside, G.P. boxmodular switch and ceiling rose/angle holder/ batten holder complete in all respect, as directed, including matching color wash. 2 Wiring points for fan and light duty exaust fan with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm FRLSH PVC insulated multistrand single core copper earthwire drawn inside, G.P. box,modular switch and ceiling rose complete in all respect, as directed, including matching color wash. 3 Wiring points for plug with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm FRLSH PVC insulated multistrand single core copper earthwire drawn inside, G.P. boxmodular switch and ceiling rose/angle holder/ batten holder complete in all respect, as directed, including matching color wash. 4 S/B of safe earthing electrode T-19 (hot dip galvanized), length up to 2000mm, outer pipe 50mm, inner pipe 25mm, terminal dia 12mm, outer GI pipe of 16swg and inner pipe of 12swg with hot dip galvanization up to 100micron filled with crytalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of earth lead will be extra) 5 S/fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand labour. T and P other material required for proper completion of the work as directed at site. 6 Supply/fixing of 6 Amp to 32 Amp. MCB (10 KA) C curve Cat B 7 Supply/fixing of 6 A to 32 A DPMCB (10 KA) C curve Cat B 8 S/F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B 9 Supply and fixing of power plug with 20A/250Volt flush type modular switch and 5pin 20A/250V flush type universal modular socket switch on concealed M.S. box, including supply of all material, labour T&P etc required for proper completion of work. 10 Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot welded,Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed.Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. 11 Supplyfixingofelectronic fan regulator(Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 12 Supply and wiring of submain with two no. 2.5 sqmm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 number 1.5 sqmm FRLSH PVC insulated 1100V grade mutistrand single core copper conductor cable as earth continuity wire complete in all respects including matching colour wash complete in all respect. 13 Supply and fixing of water tight oblong 10watt LED bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection complete in all respect Cat AA with 3 years warranty. 14 S/F of LED Street Light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 110 to 130 watt confirming to IP 66 Protection having company logo engraved complete in all respects including labourCat AAA with 5 year warranty.
|