|
Stage Contract for R&B Sub Division Zainapora (AR Plan 2025-26)Advertised Cost= 15 Lacs(Subject to Actual Requirement) MH: M&R-3054Chief Engineer R&B Department South Kashmir’s Authorization No: ARD/CESK/2025-26/03 Dt:-08-05-2025. Technical Sanction: CE(R&B)SK/TS/29 of 2025-26 dated: 14-06-2025- 1 Engagements of JCBrequired for dismantlingof various works of various naturesas per the direction of engineer in charge 2 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated upto the lead of 1 Km earth as directed by Engineer incharge,( All kinds of Soil) 3 Supply and filling of RBM /Nallah muck for Stone soling or any backfilling or filling or any other work as directedof specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete 4 Providing / laying of NP2RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 5 300 mm 6 400 mm 7 450 mm 8 600 mm 9 Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 10 200 mm 11 300 mm 12 Supplying and stacking at site, laying, spreading and compacting stone aggregate of 63-45mm size to WBM specifications in uniform thickness , handpicking , rolling with 3 wheeled road/vibratory roller of 8-10 tonne capacity in stages to proper grade and camber applying and brooming 13.2 mm type Ascreening /binding material to fill up interstices of coarse aggreagate, watering and compacting to required density including all carriages of materials as involved complete( Finished work to be measured 75 mm thick compacted Thickness). 13 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured)(ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) 14 Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. 15 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including costof all materials involved. 16 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of all materials from approved sources up to site of work complete. 17 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of all materials from approved sources up to site of work complete. 18 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)t including cost of all materials upto site of work complete. 19 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost of all materials upto site of work complete.( all works upto plinth level) 20 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost of all materials involved. 21 Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more 22 FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for: 23 Foundations, footings, bases for columns 24 Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. 25 Suspended floors ,roofings ,landings , balcones and access platefrom 26 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement including cost of all materials from approved sources upto site of work complete 27 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 28 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. 29 Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm 30 Supplying and laying of boulder stone of approved size by site inchargein dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job incld: cost of crates 31 Providing and fixing of PVC pipes Type -Bmaterial s weep hole or as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 4 dia 32 Dry random rubble masanory with hard stone in foundation and plinth using nallah stone dressedwith bond stone incld: carriage 33 Structural steel work in single section, fixed with channels, MS Pipes, Plates including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and paint all complete. 34 Providing and fixing of chemical bolts /Re-bars including cost of drilling and chemical (adhesive) as approved by Engineer In charge complete Job. 35 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 36 Beyond 30 cm girth upto and including 60 cm girth. 37 Beyond 60 cm girth upto and including 120 cm girth. 38 Beyond 120 cm girth upto and including 240 cm girth. 39 Carriage of differentmaterials (sand and aggregate) 40 Average lead upto 5 Kms 41 Average lead upto 10 Kms 42 Average lead upto 15 Kms 43 Average lead upto 20 Kms 44 Average lead upto 25 Kms 45 Average lead upto 30 Kms 46 Average lead upto 35 Kms
|