|
| 1 | Dismentling old plasteror skirting raking out joint and cleaning the surface for plasterincluding disposal of rubbist to the dumping groundwithing 50metres lead D.S.R. 15.56 |
| 2 | Dismantling W.C.pan of all sizeincluding disposal of dismantlied materials including mlaba all complete as pe directed by engineer in charge D.S.R. 14.82 |
| 3 | Dismantling of floors including staking of dismantlied materials as directed by engineer in charge with a distance of 60m S.I.N0. 697 |
| 4 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 5 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded Brick Ballast 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. S.I.N0. 275 |
| 6 | Supply and Laying of murga jali 1/2 x 24 gauge |
| 7 | Providing and laying cement concrete in bed block in 1:2:4 ( 1cement :2 coarse sand :4 stone aggregate) excluding cost of centering , shuttering and finishing |
| 8 | M-150 brick work in 1:4 (one cement and 4 coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. |
| 9 | 40mm thick 20mm nominal size Stone aggregate Cement concrete flooring in 1:2:4 ( 1cement :2 coarse sand :4 stone aggregate) finishing with a floating coat of neat cement, including cement slurry, |
| 10 | Providing and fixing glass strip of 3 mm thickness in joints of floors and skirting at the time of laying floors flush with floor level including labour, T&P etc. required proper completion of work as per S.I.No. 631 |
| 11 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarsesand. F.M.-2.25 D.S.R. 13.4.2 |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). R.C.C. work inLintel |
| 13 | Mild Steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. D.S.R.5.22.1 |
| 14 | White washing Two coat including supply of all materials Labour T and P etc. required for proper completion of the work S.I.N0. 672 |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 16 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) |
| 17 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 18 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes |
| 19 | Providing and Laying 1st rectified glazed ceramic floor Tiles of size 300x300mm or more of 1st quality conforming to IS.15622 of approved make in all colours, shade exceptwhite , ivory, fume red broun laid on 20 mm thick bed of cement mortar 1:4 (1cement :4 coarse sand ) I/Cpointing the joints with white cement pigment of matching etc. compl. As per DSR.11.40 |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. |
| 21 | Supply & fixing of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick |
| 22 | Mosquito/Fly Proof stainless steel grade 304 wire mesh gauge with 0.50mm dia wire and 1.40mm white aperture Page N0. 9 |
| 23 | Providing and fixing Panelling orP.V.C.wallPanelling , waterproof pare soffit wall panaels andall completion of work (as per market rate) well standard Quality |
| 24 | Wiring point for light with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in PVC conduite as per S.I. No.131C. |
| 25 | Wiring point for plug with 1 sqmm FR PVC insulated multistrand single core copper conductor cable in PVC conduite as per S.I. No.134B. |
| 26 | Supply and fixing of surface/flush mounting 4 way SPN distribution board without MCB copmlete in all respect as per S.I. No. 1022 |
| 27 | Suppy and fixing ofholder complete in all respect as per S.I. No. 405. |
| 28 | S/f of c.f.l. 8-18watt (as per Market Rate) |
| 29 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 30 | Providing and fixing whiteVitreous water closed squating pan(China orrissa type W.C. pan) of size 580x440mm with interngral typefoot restart with 100mm sand cast Iron P or S trap 10litre low level white P.V.C. flushing cisternincludingflush pipe w |
| 31 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.D.S.R.17.7.4 (a)White Vitreous China Flat back wash Basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 32 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 33 | Supply and Providing and fixing C.P. brassLong bodybib cock of approved quality conforming to IS:8931 |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25 mm |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20mm dai |
| 36 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: |
| 37 | Providing and fixing P.V.C. waste 32mm dia semi rigid pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 38 | Supply and Fixig of 100 mm round jali |
| 39 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. Capcity in Liters |