Indian Tenders

Tender Notice

TDR 49688814
Tendering Authority Meerut Municipal Corporation
Tender No 6993/SNV-131T/2025
Tender ID 2025_NNMEE_1047475_33
Tender Brief Corrigendum : Tender For Ward-08, Lisadi Road, From Jagram House To The Bakery Owner House And In The Lane Of Abid Shop, Road Construction Work Through Drain And C.C. - Concrete With 4 Cm. Gauge Brick Ballast Fine Sand Of 1.25 F.M. And Cement In Proportion Are 12:6:1 I
City meerut
State Uttar Pradesh
Document Fees INR 2360 /-
EMD INR 57042.0 /-
Tender Value INR 11.40 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender For Ward-08, Lisadi Road, From Jagram House To The Bakery Owner House And In The Lane Of Abid Shop, Road Construction Work Through Drain And C.C. - Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work. 2 M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work. 3 12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. 4 Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 5 R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work includingcost of binding wire. 6 M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. 7 Supply and stacking 53mm to 22.5mm size stone aggregate 8 Laying spreading and consolidation but upto10cm. (loose) thick coat. but excluding roller charges. 9 Construction of un-reinforced, without dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer ofless then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant,near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-30)but when thikness of CC is less then 20 cm. (without dowel Bar) 10 Trimix for C.C. road etc. including hire & fuel charge ofconcrete floter + all completion of work. 11 Providing & applying concrete hardner on C.C.road surface etc. all completion of work.24X0.735X(108/107)+17.8X1% (labour cess) 12 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in road/ pavement including groove cutting as per norms etc. all complete as per direction of Engineer-in-charge.(43.25+37.81)X0.735X(108/107)+1% (labour cess) 13 S/ fixing shine board at site +all comp of work

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 26-06-2025 DATE EXTEND Date 27-06-2025

Key Dates

Publish Date 26-06-2025
Last Date of Bid Submission 27-06-2025
Tender Opening Date 28-06-2025

Contact Information

Company Name Meerut Municipal Corporation
Contact Person CHIEF ENGINEER
Address NNM

Other Detail

Information Source https://etender.up.nic.in
Download FileName File Description File Size
Download Tendernotice_1.pdf Tender Documents 0 KB
Download f0b9c79f-9b1e-40d7-ae1e-5cf9f761d4f0.html Tender Documents 0 KB
Download 33.pdf Tender Documents 0 KB
Download BOQ_1903207.xls Tender Documents 0 KB
Download NNMT1.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.