|
Repair And Maintenance Work At Court Complex Mundawar (Khairthal-Tijara) - 1 13.1 50.00 Sqm 318.00 P.Sqm 15900.00 2 6.2.6 6.75 Cum 3479.00 P.Cum 23483.00 3 5.8.1 1.44 Sqm 583.00 P.Sqm 840.00 4 13.1 76.65 Sqm 235.00 P.Sqm 18013.00 5 12.1. 1 30.00 Sqm 242.00 P.Sqm 7260.00 6 14.3 4.13 Cum 990.00 P.Cum 4089.00 7 4.3 Say 4.13 Cum 5185.00 P.Cum 21414.00 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix Repair to stone masonary in cement sand mortar 1:6 with old and new stone. Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1- Cement : 6-Sand). Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 ,Cement mortar 1 : 3 (1 cement : 3 coarse sand) Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish : Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Name of Work : - Repair and Maintenance Work at Court Complex Mundawar ( Khairthal-Tijara) G-SCHEDULE Item cum Detail Qnty G SCHEDULE S. No . SoR No. Item cum Detail Qnty Rate Unit Amount 8 4.10. 2 Say 28.00 Sqm 340.00 P.Sqm 9520.00 9 4.13. 3 324.00 Kg 77.00 P.Kg 24948.00 10 10.17 .1 2.06 Cum 4483.00 P.Cum 9235.00 11 10.8 21.00 Rmt 26.00 P.Rmt 546.00 12 13.14 .1 17.00 Sqm 288.00 P.Sqm 4896.00 13 10.35 .1 18.00 Sqm 1562.00 P.Sqm 28116.00 Cement plaster 1:3 under old stone slabs with admixture (gur,nails,binding wire to mesh and scraping scales & dressing joints of slabs complete.Proofing upto 25 mm thickness. Providing and fixing tiled false ceiling of approved materials of size 595X595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams per sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24X38 mm made from 0.30 mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24X25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200X600 mm and secondary cross “T” of length 600 mm and size 24X25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200X600 mm panel to form grids of 600X600 mm and wall angle of size 24X24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 X 30 X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineerin- charge.GI Metal Ceiling Lay in Plain Tegular edge Global white colour tiles of size 595X595 mm, and 0.5 mm thick with 8 mm drop, made of G I Sheet having galvanizing of 100 gms/sqm (boths ides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) Grading roof for water proofing treatment with water proffing compound, Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Providing Batta (Gola) 75mmX 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. G SCHEDULE S. No . SoR No. Item cum Detail Qnty Rate Unit Amount 14 9.20 for gates 549.00 Kg 549.00 Kg 81.00 P.Kg 44469.00 15 9.19. 2 4.00 Sqm 3090.00 P.Sqm 12360.00 16 9.27 80.00 Kg 65.00 P.Kg 5200.00 17 9.26. 3 4.00 Sqm 617.00 P.Sqm 2468.00 18 13.23 16.00 Sqm 332.00 P.Sqm 5312.00 19 13.33 (B) (ii) 12.00 Sqm 534.00 P.Sqm 6408.00 20 13.8 144.00 Rmt 18.00 Rmt 2592.00 21 13.4. 2 12.00 Sqm 763.00 P.Sqm 9156.00 22 8.1.3 0.27 Cum 101671.00 P.Cum 27451.00 23 8.4.1. 3 12.00 Sqm 2584.00 P.Sqm 31008.00 24 8.11 12.00 Sqm 516.80 P.Sqm -6202.00 Deduct for providing Single leaf shutter instead of double leaf. Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete Repair of door, window shutters including cost of material and labour for change of damaged :Wire Gauge 14 mesh x 24 gauge Renewal of old putty of glass panes (length) Renewing glass panes,with putty and nails wherever necessary,Float glass panes of thickness 5 mm Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Sheesham wood Grade – I. Providing and fixing fully panelled/partly panelled/ double leaf shutter frames for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - A and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete :Shesham wood grade I Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows fixed Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Supplying and fixing wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance. G SCHEDULE S. No . SoR No. Item cum Detail Qnty Rate Unit Amount 25 8.6.1 5 2.00 Sqm 2755.00 P.Sqm 5510.00 26 8.7 (b) 2.00 Sqm 50.00 per mm per sqm 1200.00 27 11.37 .3 15.00 Sqm 990.00 P.Sqm 14850.00 28 10.25 .3 17.00 Sqm 1872.00 P.Sqm 31824.00 29 16.5. 3 20.00 Sqm 1235.00 P.Sqm 24700.00 Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick,12 mm thick glass, Extra for providing toughened glass panes instead of ordinary float glass panes in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complete : Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness G SCHEDULE S. No . SoR No. Item cum Detail Qnty Rate Unit Amount 30 12.22 .2 20.00 Sqm 46.00 P.Sqm 920.00 31 7.21. 5 61.05 Sqm 1162.00 P.Sqm 70940.00 32 7.21. 1 16.20 Sqm 727.00 P.Sqm 11777.00 33 7.12 51.00 Sqm 674.00 P.Sqm 34374.00 34 7.1.3 1 x 3.00 x 2.00 = 6.00 Sqm 6.00 Sqm Say 6.00 Sqm 1674.00 P.Sqm 10044.00 35 7.5.6 (iii) 1 x 2.00 x 0.60 = 1.20 Sqm 1.20 Sqm Say 1.20 Sqm 3100.00 P.Sqm 3720.00 36 12.41 .1 1507.00 Sqm 20.00 P.Sqm 30140.00 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Rajasthan Black,Above 3601 Cm2 Slabs Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: old work ( One or more coats) Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete .Old Plastered Surface (two or more coats) Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 600mm x 600mm Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 250mm x 375mm Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Makrana Adanga.Above 3601 Cm2 Slabs G SCHEDULE S. No . SoR No. Item cum Detail Qnty Rate Unit Amount 37 12.40 .2 3290.00 Sqm 40.00 P.Sqm 131600.00 38 12.37 .2 (B) 1700.00 Sqm 11.00 P.Sqm 18700.00 39 12.56 .2 63.00 Sqm 11.00 P.Sqm 693.00 40 12.59 .2 100.00 Sqm 17.00 P.Sqm 1700.00 41 9.37 145.00 Rmt 266.00 P.Rmt 38570.00 42 S- 1.14. 1 8 Nos. 1832.00 Each 14656.00 43 S- 1.36. 3 5 Nos. 2598.00 Each 12990.00 44 S- 1.38. 9.5 1 Nos. 8725.00 Each 8725.00 45 S- 1.2.2 4 Nos. 3080.00 Each 12320.00 Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra) P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (small) size 456x355x265mm. P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.overall size 45 x 20 x 8,Bowl size 20x16x8 (with drain board) P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats ) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Old work (one or more coats) including scrapping surface and necessary repairs.same colour Painting with oil type wood preservative of approved brand and manufacture :Old work (One or more coats). Painting with Aluminium paint of approved brand and manufacture to give an even shade :One or more coats on old work. G SCHEDULE S. No . SoR No. Item cum Detail Qnty Rate Unit Amount 46 S- 1.4 1 Nos. 5198.00 Each 5198.00 47 S- 1.59 1 Nos. 381.00 Each 381.00 48 S- 2.7.3 10 Nos. 590.00 Each 5900.00 49 S- 2.11. 3 3 Nos. 440.00 Each 1320.00 50 S- 3.21. 1 1 Nos. 1049.00 Each 1049.00 51 S- 2.9.1 1 Nos. 977.00 Each 977.00 52 S- 2.26. 3 2 Nos. 3397.00 Each 6794.00 53 S- 2.33 50.00 Rmt 140.00 P.Rmt 7000.00 50.00 Rmt 197.00 P.Rmt 9850.00 54 S- 3.19. 3 188.00 Rmt 173.00 P.Rmt 32524.00 55 S- 3.20 20.00 Nos. 103.00 Each 2060.00 80.00 Nos. 23.00 Each 1840.00 863328.00 EXECUTIVE ENGINEER P.W.D. DIV-KISHANGARH BAS (b) Pipe Clip, 110 mm P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS 2556 Mark) with Por S trap including cutting and making good the wall and floor P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. P & F Bib Cock (IS: 8931 Mark), Superior quality of approved make:C.P. Brass bib cock, 15mm nominal bore. P&F Ball Cock (IS1703 Mark) with Rod & P.V.C. Ball complete:(-do-) wt.Not less than 600 gm, 25mm. Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m.10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement. 50mm thick M-15 grade C.C. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. P&F Sink Cocks of superior quality & approved made :C.P. Sink cock swinging spout 15mm. P & F PVC storage Tank (IS: 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 litres capacity. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work. Exposed on wall) (a)15 mm nominal outer dia pipes (b) 25 mm nominal outer dia pipes P & F rigid PVC pipe (IS: 4985 mark) Class II (4Kg/Cm² approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant: 110mm dia. P & F Rigid PVC pipe fittings (IS : 4985 mark) of approved quality/make including jointing the fitting with solvent cement rubber ring and lubricant. Bend 87.5, 110mm dia (a) Bend 87.5, 110 mm (b) Pipe Clip, 110 mm etc
|