|
Supply, Installation, Testing And Commissioning Of Security Equipments And Baggage Handling System Works At Passenger Terminal Building, Near Coast Guard Air Station, Daman.-Civil works others 2 Providing and supplying Baggage Handling System: Departure System*Double Check-In Conveyor (Scale & Induction Conveyor)Belt Width: 650 mm, Length: 1200+1200 mm, Finish: Stainless Steel Trims. 2. *Tipping Device-Tippler Bar/Cone (8 Nos.)3.*Collector Conveyor-Belt Width: 1000 mm, Length: 10,970 mm,Finish: Stainless Steel Trims (01 No.)4.*Collector Conveyor-Belt Width: 1000 mm, Length: 11,920 mm, Finish: Stainless Steel Trims (01 no.)5.*Power Curve- Belt Width: 1000 mm, Finish: Stainless Steel Trims (01 no.)6.*General Transport Conveyor-Belt Width: 1000 mm, Length: 2200 mm, Finish: MS Powder Coated (01 no.)70. * Gravity Roller Deck-Belt Width: 1000 mm, Length: 2000 mm,Finish: MS Powder Coated Side Panels,Galvanized rollers (01no.)8.*Fire Shutter Door- Opening Width: To match Conveyor, Opening, Height: Minimum 900 mm, Finish: MS Powder Coated (01 no)9.*Draught Curtain-Width: 1400 mm, Height: 1200 mm, Strip: 2mm thick PVC, Strip Covering: Stainless Steel (1 no.)10.*MCP Panel- PLC: Rockwell/Omron/Delta, HMI: Delta/Exor, Other Items as required: Reputed make (01 lot)11.*Control Stations- As required, Make: Schneider/Reputed (1 lot)12.*Electrical Field Items- Includes Sensors & Reflectors, Isolators, Beacon & Sounder, etc., Make: Reputed (1 lot)13.*Cables & Accessories-As required, Make: Reputed (1 lot)14.*Software-As required (1 job)15.*SCADA System- Software Make: Exor/Reputed, Hardware Make: HP/Dell/Reputed(1 job) 3 Providing and supplying Baggage Handling System: Arrival System *Flat Overlapped Carousel- Slat Width: 1000 mm, Length: 37.1 m, Finish: Stainless Steel Trims, Slat: 6 mm thick rubber slat (1 no.) *Fire Shutter Door-Opening Width: To match Conveyor, Opening Height: Minimum 900 mm, Finish: MS Powder Coated (2 no) *Draught Curtain- Width: 1400 mm, Height: 1200 mm, Strip: 2 mm thick PVC, Strip Covering: Stainless Steel (2 no) * MCP Panel-PLC: Rockwell/Omron/Delta, HMI: Exor/Reputed, VFD: ABB/Reputed, Other Items as required: Reputed make (1 lot) *Control Stations- As required, Make: Schneider/Reputed (1 lot) *Electrical Field Items- Includes Sensors & Reflectors, Isolators, Beacon & Sounder, etc., Make: Reputed (1 lot) *Cables & Accessories-As required, Make: LAPP/Polycab/Finolex (1 lot) *Cables & Accessories-As required, Make: LAPP/Polycab/Finolex (1 lot) *Cable Tray &Accessories- As required, Make: Reputed (1 lot) *Software-As required (1 job) 4 Installation, Testing and Commissioning for both Departure and Arrival Baggage Handling System. 5 Under VehicleScanning System (UVSS):Providing, Supplying, installation, Commisioning and testing ofUnder VehicleScanning System, to enable inspection ofany vehicle’sunderside through a static composite image of the vehicle, as per the details given below:- TheUVSSmust be of Indianorigin,withregards toitsdesign, development,&manufacturingandtheoriginalequipment manufacturer (OEM) should preferablybe an Indian, ISO-9001 certified company. The quoted OEM’sUVSS brandshould have at leastfifty (100) ormoresuchreferences anywherewithinIndia.A listofsuch references must be furnished. The UVSS should produce multiple angular view ofhigh resolution 3D COLOR imagesofthe complete under-bodyofany vehicle passing over it using dual Area-scan camera based technology.The UVSS shouldbecapableofhandling vehicles moving at different speeds ranging from Zero (0) to 30 Km/hr, while the morphed composite imagessocapturedbyitshouldbeautomaticallyanddynamically adjusted according to the speed ofthe vehicle using multiple induction loop based sensors.Each ofthe dual imaging cameras should be ofhigh resolution Area- scan,GigE type with XGAresolution of(1920 x1200) or above. The minimum specification of this camera to be:- i. Camera Type : Gigabit Ethernet progressive camera. ii. Sensor : CMOS XGA resolution (1920 x 1200) or better. iii. Field of View: > 135. iv. Format : GiGE Vision compliant specifications. v. Composite Image resolution of the underside : 4 megapixel. vi. Camera certification : CE vii. Camera casing ingress protection rating : IP 67 or better, duly certified by NABL accredited lab. TheUVSS shouldbecapable of producing aclearandundistorted images ofthe vehicle underside, even when a vehicle completely stops / halts over the scanning unit, i.e it must be able to produce seamless and perfect composite images ofthe underside irrespective ofstoppage or non-uniform motion of the vehicle over the scanner. TheUVSS shouldnotuseeither adigitalLine-Scancamerabased technology orany typeof analogcamerastoform composite image without any distortions or Fish-eye” effect. The UVSS shouldproducea fully scannedpre-processedready to use 3D footprint model of the vehicles undercarriage.The UVSS should producevideos ofsuspicious objects that are hard to see via single view scanning systems, including visual access to cavities and niches, areas around suspensions, below the engine areas, side wall of fuel tanks & exhaust pipes etc...... 6 K4 Bollards:Providing and supplying of K4 Bollards of Crash Rated (K4) Electro Hydraulic bollard suitable to work on 415V(3-Phase) 50Hz AC supply consisting of internal hydraulic power unit, Each bollard is individually physical tested and K4 certified by accordance certification of BSI PAS 68:2013 & IWA 14-1:2013,Bollard is made of High Tensile Carbon Steel Grade B(ASTM A1006)with sheet nominal thickness of 16-18 mm and having a diameter of 275mm mounted at a minimum height of 1000mm above ground, Rising time - 6 Sec & Lowering in 4 Sec., Impact Resistance 715000 Joule, Operating Temperature -15° C to +60° C, Protection Level IP 67, MCBF -5 Million.(Including Push Button & Remote Control.) Set of 6 Bollards. 7 Installing, Testing and Commissioning of K4 Bollards of Crash Rated (K4) Electro Hydraulic bollard. 8 Boom Barrier with Accessories:Providing and supplying of AUTOMATIC ELECTRO-MECHANICAL BOOM BARRIER, 24VDC BRUSHLESS MOTOR, WITH 6 MTR BOOM WITH RUBBER PROTECTION, REVERSE ON CONTACT, OPENING/CLOSING TIME 1.8SEC TO 6SEC, 100% DUTY CYCLE (CE / IP 65)Boom Length 3.5 MtrBoom Length 6.0 Mtr 9 Installing, Testing and Commissioning of AUTOMATIC ELECTRO-MECHANICAL BOOM BARRIER. Boom Length 3.5 Mtr, Boom Length 6.0 Mtr. 10 Tyre Killer:Providing and supplying of Automatic Tyre Killer with required accessories 6.0 mtr length, dia of 25mm, height of 150 mm, width 500mm, spacing between spikes of 100mm with Required Accessories. 11 Tyre Killer:Providing and supplying of Automatic Tyre Killer with required accessories 3.75 mtr length,dia of 25mm, height of 150 mm, width 500mm, spacing between spikes of 100mm with Required Accessories complete. 12 Installing, Testing and Commissioning of Automatic Tyre Killer with required accessories 6.0 mtr length. 13 Providing, Supplying, installation, Commisioning and testing of X-Ray Baggage Inspection SystemAccessories Included:1. Input and Output Rollers 500mm Each Side2. 3KVA Voltage Stabilizer and 3KVA UPS With 30mts Backup3. CTP and Lockable Control Desk 14 Providing, Supplying, installation, Commisioning and testing of X-Ray Baggage Inspection SystemAccessories Included:1. Input and Output Rollers 1000mm Each Side2. 3KVA Voltage Stabilizer and 3KVA UPS With 30mts Backup 3.CTP and Lockable Control Desk 15 Providing, Supplying, installation, Commisioning and testing of Door Frame Metal Detector With Battery & Traffic Light NIJ Standard 0601.02 16 Providing, Supplying, installation, Commisioning and testing of Hand Held Metal Detector. 17 Providing, Supplying, installation, Commisioning and testing of Explosive Trace Detector.
|