|
Tender For Construction Of 33 Kv S/S Building And Boundary Wall At Seli (R/W); 1 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms,lift upto 1.5 mtrs including taking out the excavated soil and depositing and refilling of jhiri with waterng and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtrs. All kinds of soils. (B-56/1.8) 2 Providing & laying in position cement concrete including curing,compaction etc .complete in specified grade excluding the cost of centering & shuttering.All work upto plinth level 1:5:10. (B-66/3.2.8) 3 Randam rubble stone masonary for foundation & plinth in cement sand mortar 1:6 for above 30 cm thick walls. (B-83/6.1.7) 4 Randam rubble stone masonary for super structure above plinth level one storey height for walls upto 30cm or less in thicknessin cement sand mortar 1:6 (B-84/6.2.7+6.3.2) 5 Randam rubble stone masonary for super structure above plinth level one storey height in CM 1:6 for :- above 30 cm thick walls. 6 Add exra for facing as per design & detailled specification including additional cost of stone for Course Rubble Facing Second Sort.(B-84/6.4.1) 7 Add extra for pillar masonary including bed plates as per specifications.Bed plates to be paid separately. (B-84/6.3.3) 8 P & L in position cement concrete including curing,compaction etc .complete in specified grade excluding the cost of C & S.All work upto floor three level 1:3:6.(B-66/3.2.4+3.4(i)) 9 Half brick masonary for super structure upto third storey using bricks of designation 75 with nominal hoop reinforcement (2 Nos. 6mm MS bars) at every fourth course in CM 1:6(B-80/5.8.4+5.9) 10 Brick work in partition for super structure upto third storey 7 cm thick ( brick on edge) using bricks of designation 75 with nominal hoop reinforcement (2 Nos. 6mm MS bars) at every fourth course in CM 1:6. (B-80/5.10.3) 11 Supplyng & Fixing machine cut & polished stone shelves,tands & sills in CM 1:3 with machine cut edges. Kota stone 25 to 30 mm thick.(B-86/6.16.4) 12 Providing & Fixing steel glazed doors,windows & ventilator shutters of standard rolled steel section joints mitred & welded with steel lugs 13x3mm, 10 cm. long embedded in CC blocks 15x10x10cm. Of 1:3:6 or with wooden plugs & scews or with fixing clips or with bolts & nuts as required incl. P & F of plain glass panes 4mm thick with glazing clips & special metal sash putty of approved make or metal beading with screws complete incl. priming coat of approved steel primer excluding the cost of metal beading & other fittings except necessary hinges of pivots,steel handles,peg stay etc. as required. Window side hung.(B-89/9.28.3). 13 Supplying & Fixing of fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3 mm with suitable screw at not exceeding 150 mm distance.(B-90/9.31) 14 P & F square bars or other flates welded to window, ventilators etc.(B-90/9.32) 15 Pointing on stone masonary in CM 1:3.Deep grooved pointing.(B-165/12.36.4) 16 Plaster on new surface on walls in CM 1:6 including racking of joints etc. complete fine finished.25 mm thick. (B-161/12.9.1) 17 ……do……. 25 mm thick in CSM1:4 18 6mm cement plaster to ceiling of mix 1:3.(B-162/12.22) 19 P & L glazed20 to 25 mm size tiles pieces for roof treatment having colour & shade as approved by the Engineer in charge over 25mm thick under layer of CM 1:4 with application of cement slurry incl. finishing of joints with white cement & pigment matching the shade, curing etc. complete in all respect.(B-144/10.53) 20 P & F precast CC coping 1:2:4 mix 50mm thick complete as per specification.(B-187/15.6.1) 21 P & F T-iron frames for doors,windows & ventilators of MS Tee-sections,joints mitred & welded with 15x3 mm lugs 10 cm long embedded in CC blocks 15x15x10 cm. of 1:3:6 or with wooden plugs & screws or rawl plugs & screws or with fixing clips or with bolts & nuts as required incl. fixing of necessary butt hinges & screws &applying a priming coat of approved steel primer.(B-127/9.13) 22 P & L chequerred coloured plain cement concrete embossed or specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of CM 1:6 jointed with neat cement slurry complete.(B-153/11.33+11.3) (309+22.80=331.80 ) 23 P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make.110 mm Dia. (S-3-241/3.45.2) 24 P & F external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal,dehydreresin in glue both sides with approved steel fittings complete as per Annexure-A.Commercial Veneer both side.30 mm thick shutter.(B-107/8.18.2) 25 Polished other than Blue Kota stone flooring, skirting laid over 20 mm thick base of CM 1:4 & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete: (a) 30 mm thick slab area 2001 to 5000 Sq.cm.(B-154/11.35.3(B)+11.37.4) (747.50-59.80 =687.70 ) 26 …….DO……25 mm thick slab area up to 900 Sqm. (B-154/11.35.1(A)+11.37.4) (669-59.80=609.20 ) 27 Making grooves as per design in plaster 10 to 20 mm wide.(B-162/12.20) 28 S & F in Cement Mortar welded hand railing made out of MS round or square bars,flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. (B-127/9.16) 29 Polished other than Blue Kota stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm(Av.) thick CM 1:3 & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete:30 mmthick slab area 2001 to 5000 Sq.cm. (B-154/11.37.3+11.37.4) (806-59.80 = 746.20 ) 30 P & F of Rolling shutters of approved make,made of 80x1.25mm laths interlocked together through their entire length & jointed together at the end by end locks mounted on specially designed pipe shaft with brackets,side guides & arrangement for inside & outside locking with push & pull operation complete incl. cost of spring hooks, P & F necessary 25.3 cm. long wire spring grade No.2 & MS top cover 1.25 mm thick for rolling shutters as per design.(Clear openable area to be measured for payment). (B-129/9.23) 31 S & F steel shutter (Almirah type ) with 18 guage steel border & steel incl. locking arran. & painting etc. complete fixed on wall with joint fast (B-165/9.65) 32 P & F 1st quality standard white Ivory Glaged Tiles ISI marked of size 300x200mm in walls,floors,steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of the time complete (excluding the cost of cement plaster). Category-I:Kajaria, Jhonson, Orient, Somani make etc.(B-99/7.3(A)). 33 White washing with lime to give an even shade including all scaffolding.New work (three or more coats). (B-167/12.44.1) 34 Colour washing of all shades to give an even shade including all scaffolding. New work ( two or more coats ) with a base coat of white washing with lime (B-167/12.47.1) 35 Painting with enamel paint of approved brand & manufacture to give an even shade.Two or more coats on New work.(B-171/12.68.1) 36 P & L in position cement concrete including curing,compaction etc .complete in specified grade excluding the cost of C & S.All work upto floor three level 1:2:4.(B-66/3.2.4+3.4 (a)For S/S 37 Pointing on stone masonary in CM 1:3.Flush or Ruled pointing.(B-165/12.36.1) 38 Cement Concrete flooring grade 1:2:4 rounding off edges etc. but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm thick nominal size aggregate. (B-146/11.3.3) 39 Providing Batta (Gola) 75x75 mm in cement concrete (1:2:4) including finishing withCM 1:3. (B-111/10.8) 40 Finishing with neat cement (Punning). (B-142/12.15) 41 Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35 mm thick cement concrete flooring 1:2:4 mix complete with good finish with stone slab 60 to 75 mm thick average.(B-112/10.17.2) 42 P&F 1 mm thick MS sheet garrage door shutter with frame of 40x40x6 mm angle iron 3mm MS gusset plates at the junction & corners including all fittings & applying a coat of approved steel primer. (Excluding cost of frames) Using flats 30x6 mm for diagonal braces & central cross piece. (B-96/9.22.3) 43 Providing & Fixing steel gate grating & grills made of angles, tees, square bars or other flats, black pipe with holdfasts & fittings complete as per design & drawing including cutting, welding & fabrication with priming coat of red oxide. (B-128/9.19) 44 Structural steel work welded in built up sections, trusses & framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr. Height in R.S.Joists, Flats, Angles & Channels. (B-126/9.4) 45 P & F G.I. Barbed wire of size 2.5x2.0 mm fixed with G.I. staples etc. (B-135/9.59+9.61) 46 Surface dressing of the ground including removing vegetation & inequalities not exceeding 15 cm deep & disposal of rubbish lead upto 50 mtr. & lift up to 1.5 mtr. All kinds of soil. (B-60/1.34) 47 Excavation for road way in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 mtr. & lead upto 50 mtr. As per Technical Specification Clause 302.3. (R-8/3.5(i)) 48 Providing & laying of interlocking concrete block pavements having thickness 80 mm as per drawing & Technical Specification clause 1504. Category-C; Not Denated on any of its faces like hexagonal, rectangular, square shape as per IRC SP63:2004. (R-25/6.7(1)) 49 P & F Indian type White Glazed Vitreous China 1st quality W.C. Orissa Pan IS:2556 Mark) with 100 mm vitrous china P or S trap including cutting & making good the walls & floors of size 580x440 mm.(S-1-206/1.2.2) 50 P & F WVC Wash Basin (1st quality, IS:2556 Mark) of approved make with C.I. brackets duly painted, 1No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall of size 510x440 mm.(S-1-210/1.39.2) 51 P & F G.I. Pipes (Internal Work) with G.I. fittings (IS:1239 Mark) & MS clamps including cutting & making good the walls & floors exposed on wall : B-Class: 15 mm dia. Nominal bore. (S-2-218/2.1.1) 52 ….do…… 25 mm dia. Nominal bore. (S-2-218/2.1.3) 53 P & F G.I. Pipes (External Work) with G.I. fittings (IS:1239 Mark) & including trenching & refilling earth etc. 15 mm dia. Nominal Bore. B-Class. (S-2-218/2.2.1). 54 P & F Bib Cock (IS:8931 Mark) Superior quality of approved make. Brass 400 gm. 15 mm nominal bore. (S-2-220/2.7.1) 55 P & F Stop Cock (IS:8931 Mark) Superior quality of approved make. Brass 400 gm 15 mm nominal bore. (S-2-220/2.8.1) 56 P & F Ball Cock (IS:1703 Mark) with Rod & PVC Ball complete : Brass wt. 400 gm. 15 mm. (S-2-221/2.11.1) 57 P & F 15 mm dia. Connection pipe of approved quality/make. PVC pipe with C.P. nuts up to length 450 mm. (S-2-221/2.13.3) 58 P & F Flush Cock/Flush Valve (IS:9758 Mark) for WC of approved make. Brass/ Gun metal Half-turn wt. 1 Kg. of approved quality, 25mm nominal bore. (S-2-222/2.14.9) 59 P & F Full-way (IS:778 Mark) or Wheel valve of approved make :Gun-metal15 mm nominal bore. (S-2-222/2.15.1 60 ….do…. Gun-metal 25 mm nominal bore. (S-2-223/2.15.3) 61 P & F PVC Storage Tank (IS:12701 Marked Indicating BIS license No.) of approved make with cover, 25 mm dia. 1 M long G.I. over flow pipe & 25 cm long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litres capacity. (S-2-225/2.26.3). 62 P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make.75 mm Dia. (S-3-241/3.45.1) 63 (b) 110 mm Dia. (S-3-241/3.45.2) 64 P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make.110 mm dia. Bend 87.5 Dg. (S-3-242/3.46.4) 65 …..do….110 mm Dia. Single Tee with Door (S-3-242/3.46.17) 66 …..do…. Vent Cowel 100 mm. (S-3-242/3.46.30) 67 P & F Square-mouth Gully Trap A grade (ISI Marked) of approved makecomplete with C.I. grating, frame & Cover masonary chamber in CM 1:6, 100 mm thick C.C. 1:5:10 base concrete, 40 mm thick C.C. M-15 grade coping, 12 mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150x100 mm, RCC cover of size 300x300 mmwith frame, Internal Chamber size 300x300 mm.(S-3-230/3.5.1+S-3-238/3.33+S-3-239/3.35.7) 68 Construction of Manhole in all type of soils inner size 90x60 cm., 300 mm thick masonary in CM 1:6, 10 cm. thick C.C. 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6 finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring, making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, R.C.C. cover with frame of approved make (light duty) of size 450x450 mm, earthwork etc. complete as per design including disposal of surplus earth within 50 Mtr. lead. Depth upto 0.50 Mtr. (S-3-237/3.21.1+S-3-238/3.33+S-3-239/3.35.6) 69 Construction of Soakage Well in all type of soils 300 mm thick dry masonary, top & bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earthwork etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 Mtr. of size 240 cm dia. outside & 240 cm depth. (S-3-237/3.24.3) 70 Making Connection of G.I. distribution branch with main including all fitting upto 25 mm dia. (S-2-219/2.3.1) 71 P & F Looking Mirrors with PVC frame of approved (Atul/equivalent) of size 500x400 mm . (S-1-212/1.48.1) 72 P & F towel rail or ringof approved quality/make. C.P. brass towel rail elbow type with concealed screws size 450 mm. (heavy duty). (S-1-213/1.50.1) 73 Construction of Cement Concrete Chamber 125 mm dia. Stainless Steel sheet grating. (S-3-240/3.40.4) 74 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 K V grade (IS 694) of approved make in surface/recessed ISI marked MMS (IS:9537 P-III) PVC conduit& its accessories, round tiles, 18 S.W.G.M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc. as required. (E020100)GROUP- 2 Short point (Upto 3 Mtr.)(E020101) 75 …..do…..Medium point (Upto 6 Mtr.)(E020102) 76 …….do…..Long point (Upto 10 Mtr.) (E020103) 77 Wiring of 3 pin 5 Amp. light plug point with 1.5 sq mm nominal size FR PVC insulated unsheathedflexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathedflexible copper earth conductor 1.1 K V grade (IS 694)of approved make in surface/ recessed ISI marked MMS (IS:9537 P-III) PVC conduit & its accessories, 18 SWG 175x100x60 mm M.S. box with earthing terminal, screwless cage connectors for neutral looping in switch board, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet , zinc plated/ brass screws, cup washers, making connections, testing etc. as required. On Board (E020301) GROUP- 2 78 S & F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/recessed using saddles, clamps, fasteners as required including cutting the wall, covering conduit with wire mesh & making good the same as required. 25 mm. (E020402) .GROUP- 2 79 Supplying & drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694 ) of 1.1 KV grade of approved make in existing surface or recessed conduit/ casing capping including making connections etc. as required(E040100) Group-22x2.5 Sq.mm. + 1x1.5 Sq.mm. (E040108) 80 ……do…… 2x4.0 sq mm + 1x2.5 sqmm (E040117) 81 Suppling & Fixing of power plug point accessories on18 SWG metal box of size 175x100x60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch & Socket outlet, making connection etc. as required. Group-2.( E 040500). 82 P & F surface/recessed type 10 mm thick Teak Wood board duly antitermite treated , varnished & fixed by using gutties /PVC fastners of size 250x300 mm as required. (E050905). Gr-1 83 P & F 18 SWG M.S. Recessed fan box, hexagonal/ round of size 130 mm dia., Depth 75 mm, 12 mm dia rod fan hook with 100 mm length extended on each side. ( E170600) Gr-1 84 P&f IP-65PROTECTED Wall mounted Bukl Head light fixture suitable for retrofit CFL/GLS lamp housing made from cast Aluminium with suitablly gasketed heat resistant prismatic glass cover, copper conductor including making connection testing etc. as required (without lamp) (e 00700) Group2 85 Pipe earthing as per IS : 3043 with perforated 3.0 Mtr. Long 40 mm dia. B Class G.I. pipeincluding all accessories like nut, bolts, reducer, nipple, wire meshed funnel & C.C.finished chamber covered with hinged type with locking arrangement C.I. cover, C.I. frame of size 300x300mm & embodying the pipe complete with aternate layers of salt & coke / charcoal, testing of earth resistance as required (E150100) 86 P & F 240/415 V Porcelain Kit-Kat fuse (/HBC Type) confirming to IS:2086.1983 on existing board/sheets including making connections with lugs, testing etc. as required. Group-2.16 A, 240 V. (E100701) 87 ….do….. 32 A, 240 V. (E100703) 88 P & F ISI marked 32 A D.P. switch with fuse & indicating lamp including making connections, testing etc. as required.Group-2. (E 072300) 89 P & F strip type fluorescent tube fitting fabricated from (CRCA sheet & finished with powder coating/stove enamelled paint)/(extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, Starter, Starter seat)/Electronic Choke with terminal block duly prewired with copper conductor including making connections, testing etc. as required. (without tube) 1x28 Watts with EB. E190104) Group-1. 90 P & F fluorescent tube rod in existing fixture as required, minimum 3-STAR rating. Fluorescent powder coated 28 Watts. (E190732). Group-1 91 S & L 10 SWG G.I. (Hot Dipped) earth wire in horizontal or vertical run in ground/ surface/ recess including riveting, soldering, saddles, making connection etc. as required. (E150606) 92 P & F ISI marked socket size flush type 120/280 Watts rotary 5-step fan regulator including making connections, testing etc. as required. Group-1 (E072200) 93 P & F of Double Ball Bearing Capacitor start Alluminium Body & Blade Ceiling fan with down rod up to 30 cm. with 3x1.5 Sq.mm. PVC insulated flexible Copper conductor making connections, testing etc. as required. 1200 mm sweep. Group-1. (E170403). 94 SITC of ISI MarkIS: 8472self priming monoblock pump set of approved make,TEFC, permanent split capacitor type(PSC),fitted with thermal over load protection,mechanical seal, 1440/1500 RPM , single phase ( 180 to 240 V), including cost of hardware etc. on existing platform complete. Pump of following HP Rating , PhaseHead, Minimum discharge respectively. Self priming Pumps Texmo make. 0.5 HP,1-Φ,( 6-28 ) Mtr.,( 52-12 ) LPM. Gruop-1. (E260813). 95 S & F of Office Steel table of size 4x26x26 with 3-Drawers having separate lock & partition below each drawer of sheet 22g, square pipe 1, 16g. Top of table having 18 mm ISI marked particle board with teak wood beading & polish & fixed on square pipe 1 & one footrest of same section. 96 S & F of standard sizeSteel Office chair full arm with Maharashtra Cane seat back in tubular pipe 1, 16g. 6 pipe inserted in 1 pipe at every turn or pipe. Seat of size 430x380 mm resting over pipe & back to be holded on pipe dully painted with enamel paint of superior quality. 97 Supply of steel 3 seated chair set made of iron 62 in length & each seat of size 17x18 with hand rest structure made of round pipe 2 & square pipe 2x1 & 1/2 round pipe frame in which perforated sheet 20g is fixed which is dully painted with red oxide & enamel paint of approved brand & manufacture complete. 98 Supply & Fixing of steel stool 12x1218 with 19 mm board sunmica top with beading pipe 1,18g with angle iron frame of angle 25x25x2 mm. 99 Supply & Fixing of hydraulic pressed precast cement concrete Kerb stone of cement concrete M-15 grade after excavation ofrequired section over 20 mm thick bed of CM 1:6 including Pointing in CM 1:3 of cross section size 15x27 cm having one corner edge rounded & exposed surface painted with enamel paint as directed & desired by the Engineer in charge. 100 Supplying & Planting of different varieties of Trees/Shrubs etc. by making a pit of size 600x600x600 mm including removal of rubbish, stone & refilling with good earth. Watering of plants as per requirement & ensuring its servival upto 3 months taking all safety/precautionary measures complete in all respects as desired & directed by the Engineer in charge.(a) Neem/Sharish having size 900 to 1500 mm. 101 …..DO….. Bonganinvileas of different varieties having ht. 600 to 900 mm. 102 Supplying, Laying & Transporting of gravel/mooram binding material having PI not less than 4 to 6 complete with all leads & lifts. 103 Supplying & Fixing of Direction & Place Identification Sign Board made out of 2 mm thick MS sheet framed to angle iron 40x40x5 mm & two vertical posts of angle iron of size 65x65x6 mm, 3 mtrs. Long with holdfasts, stove enamelled paint reflective letter symbol complete of size 90x60 cm.
|