|
Tender For Special Maintenance And Repair Of Emtd Office At V. Park Meerut - Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. 2 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(1.00 mm thick with zinc coating not less than 275 gm/m²) 3 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter(12.41.2) 4 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) 5 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :(13.41.1)New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre 6 Finishing walls with Acrylic Smooth exterior paint of required shade :(New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 7 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 8 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour .Old work (one or more coats) 9 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(One or more coats on old work) 10 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 11 Refixing old glass panes with putty and nails 12 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 13 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.(For thickness of tiles 10 mm to 25 mm) 14 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 15 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 16 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :(17.2.1)W.C. pan with ISI marked white solid plastic seat and lid 17 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe(17.28.1.1)32 mm dia 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.(15 mm nominal dia Pipes) 19 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.(20 mm nominal dia Pipes) 20 Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length(18.21.1.1)15 mm nominal bore 21 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :(18.49.1)15 mm nominal bore 22 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(18.50.1)15 mm nominal bore 23 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931( 18.53.1) 15 mm nominal bore 24 Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below. (Job attending by one no. Plumber/welder/mason /carpenter with oneno. helper per hour or part of an hour.) 25 Providing 1 No. electrician Technician 26 Supplying and drawing following 3 x 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 27 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet 28 Providing and laying water proofing treatment at Roof &sunken portion of WCs, bathroom etc., by (A)1st layer- applying single coat ofBERGER Advanced Latex Plus mixed with water & cement in ratio 1:4:7 respectively and letting surface dry for 4-6 hours (B) 2nd layer- applying BERGER Home Shield PU Roofkoat compound, 50% diluted with water as primer coat (C) 3rd layer- applying single coats of BERGER Home Shield PU Roofkoat compound followed by laying of Geotextile Fleece with laping 50mm (D) 4th layer- applying two coat of BERGER Home Shield PU Roofkoat compound over geotextile. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with BERGER Home Shield PU Roofkoat.(After water Proofing contractor must submit 10 year warranty certificate from Berger paint india Limited for Each 100sqm Area) NSI-2
|