|
internal electrical installation work at Palika place (room no-30,31), Gole market,New Delhi for the staff of Grievance redressal and Dispute Resolution committee- Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as reqd. Group - CLight Point – 14 Nos.Fan point- 4 NosExhaust fan point - 2 NosCall bell point - 2 nos 2 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 3 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit as required.(a) 2x2.5 sq. mm. + 1x2.5 sq. mm earth wire 4 (b) 2x10 sq. mm. + 1x6 sq. mm earth wire 5 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 6 S&F metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in Front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as reqd. 7 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, Connections, painting etc. as required. 8 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commisioning etc as required(a) upto 450 mm sweep 9 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) 8 Way Double Door 10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 11 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 12 Supply and fixing of 20 A, 240V, SPN industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20A C curve, SP, MCB, in sheet steel enclosure on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 13 Installation, testing and commissioning of pre wired LED fitting of all types, complete with all aaccessories and tube/lamp etc. directly on ceiling/wall, including conections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required . 14 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard lenth (upto 30cm) with 1.5 sq. mm FRLS PVC insulated,copper conductor,single core cable etc as required. 15 Supplying and fixing socket type electronic fan regulator on the existing non-modular Bakelite sheet switch box including connections complete as required. 16 Supply of exhaust fan 12” size (300mm), heavy duty. Make: Havells / Crompton / Usha /orient 17 Supply of decorative slim liner LED batten fitting 18/20 watt, 1200 length, polycarbonate body. 18 Supply of ceiling fan 56” size 3 blade, 1400 mm sweep high speed (minimum 280 rpm), 100% copper winding, wide blade for higher air delivery (270 CMM minimum), white colour. Make: Havells / Usha / Crompton / Bajaj
|