}

Tender For Annual Plan-Proj:508/25 Maintenance Of Agadhi Mandhiram Building.-Agadhi Mandhiram Maintenance-General Civil Work - Maintenance Of Agadhi Mandhiram 2 14.5.1:Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out T, paravur-Kerala

Local Self Government Department has published Tender For Annual Plan-Proj:508/25 Maintenance Of Agadhi Mandhiram Building.-Agadhi Mandhiram Maintenance-General Civil Work - Maintenance Of Agadhi Mandhiram 2 14.5.1:Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out T. Submission Date for this Tender is 09-04-2025. Building Work Tenders in paravur Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

48551845
Tender For Annual Plan-Proj:508/25 Maintenance Of Agadhi Mandhiram Building.-Agadhi Mandhiram Maintenance-General Civil Work - Maintenance Of Agadhi Mandhiram 2 14.5.1:Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out T
Tender
Indian
Kerala
Paravur
09-04-2025

Tender Details

Tender For Annual Plan-Proj:508/25 Maintenance of Agadhi mandhiram building.-Agadhi mandhiram maintenance-General Civil Work - Maintenance of Agadhi Mandhiram 2 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm 3 14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 4 14.85:Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 5 14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work 6 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 OD508367/2024-2025:Supplying and fixing 20 mm thick ready madeP V C door ( 75x 210 cm ) with frame 50x 42 mm , including conveyance , cost of fitting, labour for fitting etc. 8 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 9 OD515452/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns 51.20 minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required 10 13.71:Lettering with black Japan pint of approved brand and manufacture 11 16.21:Engraving letters in hard stone 12 OD515732/2024-2025:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm ( average ) thick base of cement morter 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curving and polishing etc all complete as specified and as directed by the Engineer - in - Charge a . Flamed finish granite stone slab Jet Black , Cherry Red , Elite Brown , Cat Eye or equivalent 13 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Key Value

Document Fees
INR 555 /-
EMD
INR 6012.0 /-
Tender Value
INR 2.40 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail