Tender For General Fund - Supply And Delivery Of Stainless Steel And Aluminium Vessels And Repair And Maintenance Of Roof Shed At Amma Unavagam In Palladam Municipality, Palladam-Tamil Nadu
TDR : 48041139
Tender Notice
BOQ
Expired
Palladam
Tamil Nadu
Tender For General Fund - Supply And Delivery Of Stainless Steel And Aluminium Vessels And Repair And Maintenance Of Roof Shed At Amma Unavagam In Palladam Municipality
Name of Work: Supply and Delivery of Stainless Steel and Aluminium Vessels and Repair and Maintenance of Roof Shed at Amma Unavagam in Palladam Municipality
Sl. No.
Item Description
1
Supply and Delirvery of Aluminium Dabara, Tope Cover which includes labour, transportation etc., Complete
2
Supply and Delirvery of Stainless steel Bucket which includes labour, transportation etc., Complete
3
Supply and Delievery of Following Stainless steel and Aluminium items which includes labour, transportation etc., CompleteAL ANDI
4
AL VADA CHATTI
5
AL KADAI
6
AL SADHA VADI
7
SS BOJANA PLATE
8
SS HOLES BESAN
9
SS MUG
10
SS TUMLER
11
SS CHAIN
12
SS KARANDI
13
IRARUVAMANAI
14
Repair and Maintenance of LPG Gas Stove which includes labour, transportation etc., Complete4 Glinder Manifold
15
Click on adaptor
16
Cylinder pigtails
17
Non-Return Valve
18
REG-4-20 ps17 Regulator
19
1/2 BSPTM X MECV Straight Coupling
20
Ball nose Joint
21
3/8\" BS PPF
22
1/2\" BALL VALVE
23
NEEDLE CONTROL VALVE
24
FLEXIBLE BURNER PIGTAIL
25
HIGH PRESSURE BURNER
26
1/2\" MS HCLASS PIPE
27
Copper pigtails Burner
28
REG-2-20 PSI REGULATOR
29
MS Clamp
30
Providing and laying with 1.0 mm thick FPO membrane to seal the expansion joint. The tape having mechanical properties like, Elongation>500%, Tensile Strength >12N/mm2, Tear Strength >200N, Water tightness 400 kPa/72hrs confirming to DIN EN 1928-B. Ensure that apply Two part Epoxy Adhesive @ 1.4kg/m to get 1-2mm thick on the prepared surface before placing the tape and after placing seal with same epoxy adhesive which having Bond Strength with concrete 1.5N/mm2, Compressive Strength @ 7 days, ≥45N/mm2 as per BS 6319 Part 2, Tensile Strength @ 7 days, ≥18N/ mm2 as per BS 6319 Part 7, Shear Strength @ 7 days, ≥8N/mm2 as per BS 6319 Part 4, Flexural Strength @ 7 days, N/mm2 as per BS 6319 Part 3. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification.
31
Supply and fixing of 1200mm (48\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp
32
Supply and fixing of 4’ 18W Crystal Glass LED Tube Light Fitting complete on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting
33
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
