}

Tender For Thiruvaiyaru Block. Construction Of Pds Building At Thillaisthanam Panchayat In Thiruviyaur Block., Thanjavur-Tamil Nadu

Rural Development And Panchayats Department has published Tender For Thiruvaiyaru Block. Construction Of Pds Building At Thillaisthanam Panchayat In Thiruviyaur Block.. Submission Date for this Tender is 22-10-2024. Footwears Tenders in Thanjavur Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

45645407
Tender For Thiruvaiyaru Block. Construction Of Pds Building At Thillaisthanam Panchayat In Thiruviyaur Block.
Tender
Indian
Tamil Nadu
Thanjavur
22-10-2024

Tender Details

Tender For Thiruvaiyaru Block. Construction Of Pds Building At Thillaisthanam Panchayat In Thiruviyaur Block.; 1 ThillaisthanamPanchayat . 2 Construction of PDS Building at Thillaisthanam Panchayat in Thiruviyaur Block 3 Earth work excavation in all class of Soil except hard rock requiring blastingwith intial lead and lift etc. Complete for foundation as per SS 20B. 4 Collection and supply of M.sandand filling in to the basement including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete 5 Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete 6 Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4x41/4x21/4 for the following including curing etc., complete complying with standard specifications. Rate for 10m3 7 Basement 8 Walls Above Basement (Super Structure) 9 Supplying and erecting centeringshuttering includingnecessary supportsforplane etc., complete. 10 Below Basement 11 Above Basement 12 Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing 13 Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc.,as directed by the departmental officers complete complying with standard specifications. 14 CC 1:2:4 mix using 20mm metal including all cost and conveyance of all materials and labours etc., complete 15 Providing granolithic flooring with CC 1:2:4 mix 25 mm thick includingcost and conveyance of all materials to site and all labour charges etc complete 16 Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. 17 Plastering with cement mortar 1:5 mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc 18 Plastering with cement mortar 1:3 mixto 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete 19 Finishing the top of roof with one course of PRESSED TILES of size 23cm X 23cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight. 20 Distembering two coats with best approved distemberincluding cost and conveyance of all materials to site and all labour charges etc complete 21 Exterior Emulsion painting two coats with best approved quality and colourpaint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. 22 Fabrication and supply & Delivery of MILD STEEL DOORS/WINDOWS of the following sizes with Single Leaf outer frame made of 35x35x5 mm equal M.S L angle and shutter frame made of 25 x25 x5mm equal M.S. L angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 Nos. Horizontal and 3 Nos. diagonal using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of holdfasts made of 35x35x5 mm equal M.S L angle, 1 No. of wind appliance, 2 Nos. of tower bolts,1 No of aldrop, 2Nos ofhandles, fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer etc., complete 23 Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and sectionusing 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. 24 Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete 25 Labour Charges for Fixing the Doors inculding all Charges etc.. 26 Labour Charges for Fixing theSteel Window inculding all Charges etc.. 27 Supplying & fixingwith cuddapah slabs 20-30mm thick for cup board including all cost and conveyance and all labour charges etc .comp. 28 Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T WClamps, Plug, Shoes, bend, Screws, nails etc., complete 29 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with P or S trap conforming to BIS etc., complete complying with standard specifications and as directed by the departmental officers. 30 Provision for Electrification 31 Fan point & Light point (SD 18) 32 Ceiling fan (SD 110) 33 Supply and fixing of 4 18 W LED tube light SOR -M1211 34 Plug point (SD 38) 35 Service wire (SD 62) 36 EB Main board (SD 145) 37 Provision for EB deposit 38 Provision for Leachpit 900mmdia Rcc rings with cover - 2 Nos with inspection chamber 39 Provision for Sintex tank and water supply line and fittings 40 Provision for Name Board etc., complete. 41 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}

Key Value

Document Fees
Refer document
EMD
INR 13500.0 /-
Tender Value
INR 13.50 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail