Tender For Mandir Lane And Mushtaq Lane Situated In Darulshafa Compound And Civil Maintenance And Painting Work In Various Houses Of The Compound, 1 Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metre, lucknow-Uttar Pradesh

Tender for Mandir Lane and Mushtaq Lane situated in Darulshafa Compound and civil maintenance and painting work in various houses of the compound, 1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominalconcrete1:3:6orrichermix(includingequivalent Design mix 15.2.1 2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeWith cement mortar 1:4 (1cement: 4 coarse sand)(DAR14.1.2) 3 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) 4 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) 5 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brandandmanufacturerincludingapplyingadditionalcoatswherever required to achieve even shade and colour Old work one or more coat (13.81.1) 6 ProvidingandfixingG.I.pipescompletewithG.I.fittingsandclamps, including cutting and making good the walls etc. Internal work(15 mm dia nominal bore) (18.10.1 7 ProvidingandfixingG.I.PipescompletewithG.I.fittingsandclamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :(15 mm dia nominal bore )DSR18.11.1 8 ProvidingandfixingG.I.UnioninexistingG.I.pipeline,cuttingand threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : ( 15 mm nominal bore)18.47.1 9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain&brassthreadedfittingsandfixingthepipewithclampsat1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. ( 25 mm nominal dia Pipes)18.8.3 10 Providing and fixing wire gauge shutters using stailess steel wire gauge (grade-304) aperture 1:4 mm 0.50 mm dia wire wire . For doors windows and clerestory windows :30 mm thick shutters of required size UP teak wood. (second class teak wood )DSR9.134.2 11 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 5 mm (weight not lessthan 12.5kg/sqm)DAR14.6.2 12 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading (DAR -9.7.8) 13 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vereering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel bolt hinges with necessary(DAR -9.21.2) 14 Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc.100x58x1.9mm complete (DSR 9.55.2) 15 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378). 300x16(DAR -9.62.1) 16 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378). 250x16 mm (DAR -9.62.2) 17 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378). 250x10 mm (DAR -9.63.1) 18 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378). 200x10 mm(DAR -9.63.2) 19 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378). 125 mm (DAR -9.66.1) 20 Providing and fixing bright finished brass Tower bolts (barrel type) with necessary screws etc complete. 150x10 mm(DAR -9.74.3) 21 Providing and fixing C.P.Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) 22 Providing and fixing water closet squaiting pan (indian type W.CPan) with 100 mm sand cast Iron P or S trap. 10 liter low level white P.V.C flushing cistern. Including flush pipe, with manually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures complete. Including cutting and making good the walls and floors wherever required white Vitreous chin orissa pattern W.C. Pan of size 580x440 mm with integal typefoot rests. (17.1.1) 23 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous china Wash basin Size-630x450 mm with a pair of 15 mm C.P. brass pillar taps. (17.7.1) 24 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe 32mm dia (17.28.1.1). 25 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (DAR17.31). 26 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge (DSR 1.1.18) 27 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :( Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture)(DSR13.62.1) 28 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) overexisting cement paint surface DSR13.112.1

INR 680 /-

INR 19000.0 /-

INR 1.90 Lakhs /-