Tender For Strengthening Of Internal Electrification In Various Staff Quarters At Sector-14A, Noida, 1 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cableand1.5sq.mm.FRLSPVCinsulatedcopperconductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. (DSR-2018, 1.15) 1.15.1 Group A 2 Rewiringfortwincontrollightpointwith1.5sq.mmFRLS PVC insulated copper conductor single core cable and1.5sq.mm.FRLSPVCinsulatedcopperconductorsingle core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.(DSR-2018, 1.16) 3 Supplyinganddrawing1x1.5 sq.mmofFRLSPVCinsulated copperconductor,singlecorecableintheexistingsurface/ recessed steel/ PVC conduit as required. (DSR-2018, 1.17) 1.17.1, 4 SupplyingandfixingoffollowingsizesofmediumclassPVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR-2018, 1.21)a) 20 mm (1.21.1) 5 b) 25 mm (1.21.2) 6 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (DSR-2018, 1.26) 7 Erectionofwallbracket/ceilingfittingsofallsizesand shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. (DSR-2018, 1.35) 8 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. (DSR-2018, 1.38) 9 Installation, testing and commissioning of pre-wired, fluorescent fitting/compactfluorescentfittingofalltypes,completewith all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (DSR-2018, 1.41) 10 Installation,testingandcommissioningofceilingfan,including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. asrequired. (DSR-2018,1.44) 11 Supply and Fixing of 36 watt to 46 watt above 3300 leumin indoor Recess mounitng LED Square Ceiling Fitting for Armstrong ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of special Polucarbonate material and driver set complete in all respects. UPPWD-2018 P.S.-1406Cat-AAA 12 Supply and Fixing of 12 watt to 15 watt indoor Recess mounitng LED Square Fitting for Armstrong ceiling having Powder coated die cast aluminium housing with extended heat sink and diffuser of Polycarbonate material and driver set complete on all respects. UPPWD-2018 P.S.-1410Cat-AAA 13 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (DSR-2018, 1.50)a) Upto 450 mm sweep (1.50.1) 14 b) 510 mm sweep (1.50.2) 15 Supplyingandfixingfollowingsize/modules,GIboxalong with modular base & cover plate for modular switches in recess etc as required. (DSR Electrical 2018)1) 2 Module (75mm X 75mm) (1.27.1) 16 2) 3 Module (100mm X 75mm) (1.27.2) 17 3) 4 Module (125mm X 75mm) (1.27.3) 18 4) 6 Module (200mm X 75mm) (1.27.4) 19 5) 12 Module (200mm X 150mm) (1.27.6) 20 SupplyingandfixingfollowingModularbase&coverplateon existing modular metal boxes etc. as required. (DSR Electrical 2018)1) 1002 Module (1.28.1) 21 2) 3 Module (1.28.2) 22 3) 4 Module (1.28.3) 23 4) 6 Module (1.28.4) 24 5) 12 Module (1.28.6) 25 Supplyingandfixingfollowingmodularswitchonthe existingmodularplate&switchboxincludingconnectionsbutexcluding modular plate etc. as required. (DSR Electrical 2018)1) 5/6 amps switch (1.24.1) 26 2) 3 pin 5/6 amp socket outlet (1.24.4) 27 Supplyingandfixingfollowingmodular socketonthe existingmodularplate&switchboxincludingconnectionsbutexcluding modular plate etc. as required. (DSR Electrical 2018)1) 15/16 amp switch (1.24.3) 28 2) 6 pin 15/16 amp socket outlet (1.24.5) 29 Supply and Fixing of Recess/ Surface/ Pendant mounting round 10 to 15 Watt LedDown Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. UPPWD-2018 P.S.-1402 Cat-AAA 30 Supplyingandfixingfollowingmodular Bell Push onthe existingmodularplate&switchboxincludingconnectionsbut excluding modular plate etc. as required. DSR-2018 (1.24.8) 31 Supplyingandfixingsteppedtypeelectronicfanregulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR-2018 (1.25) 32 Supplyingandfixingfollowingpianotypeswitch/socketonthe existing switch box/ cover including connections etc. as required. (DSR Electrical 2018)1) 15/16 amp switch (1.23.3) 33 2) 6 pin 15/16 amp socket outlet (1.23.5) 34 3) 5/6 amps switch (1.23.1) 35 4) 3 pin 5/6 amp socket outlet (1.23.4) 36 Supply and Fixing of Recess/ Surface/ Pendant mounting round 6 to 8 Watt LedDown Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. UPPWD-2018 P.S.No.-1401 Cat-AAA 37 S/F of 4 Pole MCB 63A Havells make. Complete in all respects. UPPWD-2018 PS. No. 1020A (10KA) 38 S/F of D.P. MCB 63A/415 Volt Havells make. Complete in all respects.UPPWD-2018 PS. No. 1011 (10KA) 39 Supply and Fixing of LED Tube light with batten suitable for upto 1x22 watt. LED tube light complete including tube etc on surface complete in all respects. UPPWD-2018 P.S. 1413 40 S/W of submain withtwono. 6 sq.mmFR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I UPPWD-2018 PS No. 289(D) 41 S/W of Submain with 2 nos 4 sq.mm FR PVC insulated 1100V grade multistrand single copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth contuiity wire including matching colour wash etc. complete in all respects. UPPWD-2018 PS.No. 216C 42 S/F of Fan Regulator Dimmer type 300x400 watt ISI marked on the existing switch board including making connection, required material, labour T/P etc. for proper completion of work of Anchor/Kinjal make. UPPWD-2018 PS No. 1203 43 S/F of betten/angle holder complete in all respects UPPWD-2018 PS. No. 405 44 Supply and Fixing of pendant mounting having 1x4 size 40 to 45 watt seamlessly integrates LED luminier with acrylic sheet diffuser and integral electronic driver complete in all respects.UPPWD-2018 P.S. No.-1416Cat-AAA 45 S/W of submain withtwono. 2.5 sq.mmFR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I UPPWD-2018 PS No. 289 46 Wiring point for light with 1 sq.mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit piano type switch& ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc. complete in all respects, as per direction. UPPWD-2018 PS.No. 131C 47 Supply and Fixing of Ceiling Fan 48 (1200 mm) Crompton Make. Complete in all respect. As per direction of E/I. (AOR) 48 S/F of 300mm dia Exhaust Fan Khaitan/Almonard make. Complete in all respects. AOR 49 S/Lof Al. Conductor PVC insulated armoured served & sheathed cables 1100 V grade at a depth of 750 below of ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the E/I complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.(Grandley,Gloster,Kalinga, Havellsmake) (P.S. No 501) (a) 10 sq.mm x 2 core 50 (b) 16 sq.mm x 2 core 51 (c) 50 sq.mm x 3.5 core 52 S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads making connections etc. complete in all respects as pe direction of E/I (PS No. 504.) a)- 10 sq. mm 53 b)- 16 sq. mm 54 c)- 50 sq. mm 55 Wiring of light/power plug with 2x4 sq.mm FRLS PVC insulated copper condustor single core cable in surface/recessed medium class PVC conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR-2016, 1.12)
