Tender For Conversion Of 33 Kv Overhead Suzdu-2 (Nirana) To 33 Kv Underground Line Due To Increasing Capacity Work From (2×63) Mva To (3×63)Mva With Construction Of New 33 Kv Bay At 132 Kv Ss Bhopa Raod. Under Etd, Muzaffarnagar., muzaffarnagar-Uttar Pradesh

Conversion Of 33 Kv Overhead Suzdu-2 ( Nirana ) To 33 Kv Underground Line Due To Increasing Capacity Work From ( 2×63 ) Mva To ( 3×63 ) Mva With Construction Of New 33 Kv Bay At 132 Kv Ss Bhopa Raod. Under Etd, Muzaffarnagar. 1 Safe carriage of with loading & unloading at both ends respectively. (under jurisdiction of PVVNL)i) M.S. Angle (65×65×6)mm 2 ii) M.S. Channel (125×65)mm 3 iii) M.S. Channel (100×50)mm 4 iv) Stay Sets (20×1800)mm 5 v) Stay wire G.I 7/8 SWG 6 vi) G.I Wire No. 6 SWG 7 vii) G.I Wire No. 8 SWG 8 viii) 33 KV Pin Isulators(Polymer) 9 ix) Disc Insulators B&S 7000 Kg.(Polymer) 10 x) Disc Fittings B&S for Dog 70 KN (Polymer) 11 xi) M.S. Earthing Rod 12 xii) Steel Tublar Pole SP-55 11M (Bottom PortionGalvanized) 13 xiii) Steel Tublar Pole SP-72 13M(Bottom PortionGalvanized) 14 xiv) V Type Cross Arm 33 KV 15 xv) 33 KV, 3×300 mm² XLPE Cable 16 xvi) Outdoor Type cable Jointing kit for 33 KV XLPE cable 3×300 mm² 17 xvii) Guarding Angle 75×75×8 18 xviii) ACSR Dog Conductor 19 xix) GI Wire 16 NO. SWG 20 Miscellaneous Electrical works for Construction of 33KV Lines A- Erection of support after excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (900×600)mm and having depth of 1/6th of the full length of the support & Erection of support. The work includes carriage and handling of supports from site store to pit site.(i) 11 M Long STP, SP-55 Round Pole 21 (iii) 13 M Long STP, SP-72 Round Pole 22 B- Fixing of all clamps, Cross Bracing Sets 3.5 Mtr. from M.S. Angle 65×65×6mm/50×50×6mm & other accessories on the supports as per drawing. Work includes cutting of holes and providing M.S. Bolts of 16×40mm size in the middle of cross bracing with 1 no. spring washer. The work also includes carriage & handling of accessories from sectional store to pit site as well as any fabrication work if required.(i) Single Pole13 M Long STP, SP-72 Round Pole 23 (ii) Double Pole Structures 11 M Long STP, SP-55 Round Pole 24 Grouting of supports in CC 1:4:8 (Cement, sand & 40 mm brick ballast) Grouting will be done in the block of size (450×450)mm ×1/6th of full length of the support, up to ground level, 300 mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grit) with muffing as per drawing, work includes back filling and proper ramming.(i)11 M Long STP, SP-55 Round Pole 25 (ii) 13 M Long STP, SP-72 Round Pole 26 Grouting of stay rods (20×1800)mm including all work of excavation, cement concrete in size (0.60 × 0.60 × 0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg. including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. 27 Earthing of supports with MS earth Rod of (20×2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connecting below the earth electrodes with the help of G.I. wire no. 8 SWG and earthing lugs. 28 Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including cutting with fabrication and fixing of guarding channel with clamps nut & bolts etc. as per drawing. 29 Providing & fixing of danger board at each location as per specification of the drawing with clamps etc. 30 Making H.T. Connections of the proposed line, on to the existing 33 KV bay/line from where line is eminating and another at the end of line to the terminal gantry at proposed 33 KV Sub-station. The work consists of fixing of tension fitting, insulators, jumpering, clamping and binding etc. at the end as per site conditions. 31 Supply & Painting of following supports/structures with 2 coats of synthetic enamel paint after one coat of ready mix primer including cost of all material, as well as rubbing/cleaning of surface as required for proper completion of work. Painting will be done by post office red paint from top to cross arm and remaining by Aluminium paint.i) 11 Mtr, SP-55 Poles including all channels/X-Arms/Clamps etc Double supports 32 ii) 13 Mtr, SP-72 Poles including all channels/X-Arms/Clamps etc.Single supports 33 Supply & Wrapping of barbed wire on 33 KV PCC Poles/SP-55 ST & SP-72 ST Poles as anti-climbing device for a length of 0.9 Mtr., wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75 Mtr. from the ground complete with supply and fixing of lower end & upper end clamps made of M.S. Flat 40×5mm complete with nuts & bolts & all other required material. 34 Numbering of each supports by preparing background with dark yellow paint in the size of 150mm dia and writing support number 100mm high with black paint. 35 H.T. Power Cable Laying :i) Digging of trench of size 900x1050 mm for laying of 33KV cable including loops. (for double circuit cable laying) 36 ii) Safely laying of33KV 3x300mm² XLPE cable in cable trench by laying 2 No. Cables in each trench. (single circuit laying) 37 iii) Safe laying of 33KV XLPE cable in Air on D/P / F/P. 38 iv) Supply & Laying of Ist class bricks along the length on both sides and stone slab 650x450x40 as a top cover over the XLPE cable in trench. (Single circuit laying) (as per RESPO Norms) 39 (v) Supply & filling river sand in side beneath & around cable in the trench 40 (vI) Making of 33KV outdoor type Heat shrink XLPE Cable Box of size 3x300mm2 and crimping of proper size Aluminium lugs. Work includes providing insulating tapes etc. 41 vii) Providing and fixing 150mm dia 3 mtr long G.I pipe over 33KV 3x300 mm2 XLPE cable before mounting the cable on double pole structure. This work includes supply & fixing of clamps, Nut bolt, sealing of top and bottom of pipe and one end of pipe is to be buried under earth about 500mm including laying of cable in Pipe.

INR 1180 /-

INR 3000.0 /-

INR 2.41 Lakhs /-