Gorkhaland Territorial Administration-GTA has published Tender For Construction Of Community Hall At Mongbol Busty Under 33Rd Chibbo Tashiding Constituency, Gta, Kalimpong. Submission Date for this Tender is 17-03-2023. Building Work Tenders in kalimpong West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. (c) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth. |
| 3 | Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming. |
| 4 | Stone Boulder 150mm of N. Bengal variety |
| 5 | Cement concrete with 30mm down graded shingles excluding shuttering. (a) 1:3:6 proportion |
| 6 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes . |
| 7 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes . River Bazree |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rodsinitial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersectionas per drawing and direction (a) For works in foundation and upto roof of ground floor/upto 4 m |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (a) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 10 | 125 mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (b) 20 mm thick plaster |
| 12 | (ii) With 1:4 cement mortar (b) 15 mm thick plaster |
| 13 | Neat cement punning 1.5mm thick in wall dado, window sills floors drains etc.using cement @0.152m3/100m2 |
| 14 | Wood works in doors and windows frames fitted and fixed in position including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and MS clamps. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak |
| 15 | Panel shutters of door and window, as per design (each panel consisting of single plank with out joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made). (ii) 40 mm.thick shutters with 19 mm. thick panel of size 30 to 45cm. (b) sishu,gamar,Champ,badam,bhola, mogra,Hallak, |
| 16 | Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor. 35mm thick shutters. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak |
| 17 | Supplying, fitting and fixing M.S. clamps for fitting doors & windows framesmade offlat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. |
| 18 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm. |
| 19 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod (ii) 100 mm grip x 10 mm dia rod . |
| 20 | Anodised aluminium skeleton bolt of approved quality manufactured from extruded section confirming to IS specification (IS 204/74) fitted and fixed with cadmium plated screws: (vi) 450mm long x 12mm dia. bolt. |
| 21 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (v) 150mm long x 12mm dia. bolt. |
| 22 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part there of |
| 23 | Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor). In Roof, (c)With 0.80 mm.thick sheet. |
| 24 | Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping) 300 wide gutter |
| 25 | Wooden eaves board as per design fitted and fixed complete.Ornamental eaves board (Badam/Gamar/Champ/Hallak) (a) 19mm thk |
| 26 | Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete. Page noUPVC Pipes:(ii) 110mm Dia |
| 27 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm thk) |
| 28 | Priming one coat on timber or plastered or on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 29 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary (a) On timber or plastered surface With super gloss (hi-gloss) - iv) Two coats (with any shade except white) |
| 30 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (In Ground Floor) Two coats i) Water based interior grade Acrylic Primer |
| 31 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer"s specification and as per direction of EIC. |
| 32 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer"s specification)including cleaning and smoothning of surface. Two Coats |
| 33 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion |
| 34 | Ceiling of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary wood battens of size 40mm x20mm. In ground floor 4mm thick |
| 35 | Rubble Masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. In fine dressed work in building . In ground Floor |
| 36 | LAND DEVELOPMENT Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 37 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. (b) With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm. depth) from land arranged by the Deptt. within a lead of 100 m. |
| 38 | Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. |
| 39 | Cement concrete with 30mm down graded shingles excluding shuttering. 1:3:6 proportion |
| 40 | Plum concrete work with 40% cement concrete with 30mm down graded stone metal and 60% stone boulder of size 150mm and above, placed in position as directed excluding shuttering if any. 1:3;6proportion |
| 41 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 42 | Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. |
| 43 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification. |
| 44 | SANITARY AND PLUMBING Labour for fitting and fixing GI pipes above ground (concealed) in structures with holder bats clamps including cost of jointing materials, holder bat clamps etc., as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height 15mm dia |
| 45 | Supplying G.I. Pipe (Tata made) with socket at one end including carriage and all other incidental charges. 15mm dia. Medium (1.57 Kg/m) |
| 46 | Supplying GI plain elbow of approved brand and make. 15mm dia |
| 47 | Supplying fitting fixing Plain Tee of approved make with necessary joining materials.A) 15mm di |
| 48 | Supplying fitting and fixingwhite Vitreous china best quality approved make wash basin with CIbrackets on 75mmx75mm wooden blocks CP waste fittings of 32mm dia ,one approved qualitybrass P pillar cock of 15 mm dia CP chain with rubber plug with of 30 mm dia , approved qualityPVC waste pipe with CP nut 32 mm dia , 900 mm long approved quality PVC conection pipewithHeavy brass CP nut including mending good damages and painting the brackets with two coats of approvedpaint c)630mmsx450mms size |
| 49 | Pedestal of wash basin of white Vitreous china ware ( rectangular rounded or triangular) of approved make supplied fitted and fixed in position |
| 50 | Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. wit p trap |
| 51 | Closet seat of approved make with lid and CP hinges ,rubber buffer and brass screws supplied fitted and fixed complete. a) EPWCiv) Bestolite (solid type ) white |
| 52 | Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). |
| 53 | Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 54 | Supplying fitting fixing cast iron soil pipe conforming to IS 3989/1970 andIS 1729/1964 bobbins nails etc. including making hole in the wall door etc.cutting trenches in any soil or through masonry concrete if necessary and mending good damages including joint with joining materials and painting two coats to the exposed surface with approved paint complete. a) Valamoid joints including sealing with cement morter(4:1) upto top quarter depth iii) 100mm dia |
| 55 | Supplying fitting and fixing HCL Bend without door confirming toISSincluding jointing and painting two coats to the exposed surface with approved paint complete. |
| 56 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). 100mm dia |
| 57 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. |
| 58 | Supplying PVC water storage tank of approved quality with closed top with lid (Black) - Multilayer 500 litres capacity |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
