Public Works Department-PWD has published Tender For Annual Repair Maintenance Of Various Electrical And Mechanical Services In District Court, Rohini, Delhi. (Sh Repairing And Servicing Of Ceiling Fan). Submission Date for this Tender is 10-02-2023. Ceiling Fan Tenders in rohini Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying Installation, testing and commissioning of 1200 mm Sweep (aluminium body) AC ceiling fan without regulator, including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as reqd i/c testing, commissioning etc. complete as reqd. (ISI Maked). |
| 2 | Servicing, oiling and check the nut & bolt, cotter pin, insulator, screw wiring, connection etc of installed ceiling fans and replace the faulty items if required as mentioned above tightening the blades including cleaning complete etc. as required. |
| 3 | Replacement of following parts of 1200/1400 MM ceiling fan i/c rebate of old parts i/c testing as required: a) Ball Bearing 6201 |
| 4 | b) Ball bearing 6202 |
| 5 | Painting of ceiling fan in installed position with one or more coats of spray painting with synthetic enamal paint of approved brand and manufacturer to give an even shade, i/c cleaning of surface with detergent etc. as required. |
| 6 | Dismantling, rewinding & reinstallation of 300 mm exhaust fan with suitable size copper wire including varnishing, baking, nomex paper/ gasket set, lubricant oil, greasing, wiring from point to fan (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. along with cartage from site to workshop & back incl. credit of old burnt out dismantled copper wire etc. as required at site. |
| 7 | Supply and fixing of heavy duty fully automatic motorized rolling system with side rolling shutter motor with single phase 220 volt 50 Hz lifting height 6 mtr lifting force capacity 600 kg single phase suitable for all weather conditions precisely open and close strong power and low noise safety break up and down switch shaft, clutch and automatic system with inbuilt manual SS chain pulley system mounted on the GI rolling shutter complete as required. |
| 8 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | Buy back (Credit back) of following dismantle material:- a) Ball Bearing 6201/ 6202 |
| 10 | b) Rolling shutter motor |
| 11 | c) Ceiling fan |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
