Aurangabad Municipal Corporation has published Tender For Providing Bituminous Speed Breaker At Various Places In Zone No 4. Submission Date for this Tender is 08-02-2023. Speed Stoppers Tenders in aurangabad Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | WET MIX MACADAM -- PROVIDING, LAYING, SPREADING AND COMPACTING GRADED STONE AGGREGATE TO WET MIX MACADAM SPECIFICATION INCLUDING PREMIXING THE MATERIAL WITH WATER AT OMC IN MECHANICAL MIX PLANT CARRIAGE OF MIXED MATERIAL BY TIPPER TO SITE, LAYING IN UNIFORM LAYERS WITH PAVER IN SUB- BASE / BASE COURSE ON WELL PREPARED SURFACE AND COMPACTING WITH VIBRATORY ROLLER TO ACHIEVE THE DESIRED DENSITY. LAYING BY GRADER/PAVER. MORTH 406 |
| 2 | BITUMINOUS MACADAM:--PROVIDING AND LAYING BITUMINOUS MACADAM USING CRUSHED AGGREGATE OF GRADING 1, PREMIXED WITH BITUMINOUS BINDER, TRANSPORTED AT SITE WITH VTS, LAID OVER A PREVIOUSLY PREPARED SURFACE , FINISHED TO THE REQUIRED GRADE ,LEVEL, ALIGNMENT,AND ROLLING TO ACHIEVE THE DESIRED DENSITY FOR 80/100 MM COMPACTED THICKNESS WITH DRUM MIX TYPE HOT MIX PLANT WITH SCADA HAVING COMPLYING ESSENTIAL FEATURES OF HOT MIX PLANT AS PER IRC-27 2009 SPECIFIED CONDITIONS AND ATTACHMENTS SUCH AS ELECTRONIC LOAD SENSOR BASED BELT CONVEYERS,AUTOMATIC SYNCHRONIZATION OF BITUMEN AND AGGREGATE FEDDER,BUILT IN DUST CONTROLLER SYSTEM AND PLC FOR DRUM MIX PLANT ,SENSOR PAVER,AND VIBRATORY ROLLER EXCLUDING PRIME/TACK COAT ETC. COMPLETE --BITUMEN 3.30% OF SPECIFIED GRADE GRADE (VG-30 BULK BITUMEN RATES ARE CONSIDERED TO ARRIVE AT RATES) MORTH 504 |
| 3 | PROVIDING AND APPLYING TACK COAT ON THE PREPARED SURFACE HEATING BY FAMES IN BOILER AND SPRAYING BITUMEN WITH SPRAYER ON DRY / HUNGRY B.T. SURFACE 3 KG/10 SQM. (VG-30 BULK BITUMEN RATES ARE CONSIDERED TO ARRIVE AT RATES) MORTH 503 |
| 4 | BITUMINOUS CONCRETE:--PROVIDING AND LAYING BITUMINOUS CONCRETE USING CRUSHED AGGREGATE OF GRADING 1,PREMIXED WITH BITUMINOUS BINDER @5.40% BY WEIGHT OF TOTAL MIX AND FILLER, TRANSPORTED AT SITE WITH VTS, LAID OVER A PREVIOUSLY PREPARED SURFACE, FINISHED TO THE REQUIRED GRADE ,LEVEL, ALIGNMENT, AND ROLLING TO ACHIEVE THE DESIRED DENSITY FOR 50MM COMPACTED THICKNESS WITH DRUM MIX PLANT WITH SCADA, SENSOR PAVER AND VIBRATORY ROLLER EXCLUDING PRIME/TACK COAT ETC. COMPLETE --BITUMEN OF SPECIFIED GRADE WITH STONE DUST FILLER. (VG-30 BULK BITUMEN RATES ARE CONSIDERED TO ARRIVE AT RATES)MORTH 509 |
| 5 | PROVIDING BITUMINOUS TYPE A LIQUID SEAL COAT ON BITUMINOUS SURFACE INCLUDING SUPPLYING ALL MATERIALS & BITUMEN OF VG-30 GRADEPREPARING EXISTING ROAD SURFACE, HEATING AND APPLYING BITUMEN @ 0.98 KGSQM. BY MECHANICAL MEANS, SPREADING CHIPS AND ROLLING, BY STATIC ROLLER HAVING WEIGHT 8 TO 10 MT. ETC. COMPLETE.MORTH 513 |
| 6 | POLYCARBONATE AND ABS MOULDED BODY AND REFLECTIVE PANELS WITH MICRO PRISMATIC LENS CAPABLE OF PROVIDING TOTAL INTERNAL REFLECTION OF THE LIGHT ENTERING THE LENS FACE AND SHALL SUPPORT A LOAD OF 16000 KG TESTED IN ACCORDANCE TO ASTM D 4280 TYPE H AND COMPLYING TO SPECIFICATIONS OF CATEGORY A OF MORTH CIRCULAR NO RW/NH/33023/10-97. DO III DT 11.06. 1997. THE HEIGHT, WIDTH AND LENGTH SHALL NOT EXCEED 50 MM, 100 MM AND 102 +/- 2 MM AND WITH MINIMUM REFLECTIVE AREA OF 13 SQCM ON EACH SIDE AND THE SLOPE TO THE BASE SHALL BE 35 +/- 5 DEGREE. THE STRENGTH OF DETACHMENT OF THE INTEGRATED CYLINDRICAL SHANKS, (OF DIAMETER NOT LESS THAN 19 +/- 2 MM AND HEIGHT NOT LESS THAN 30+/- 2 MM) FROM THE BODY IS TO BE A MINIMUM VALUE OF 500 KGF. FIXING WILL BE BY DRILLING HOLES ON THE ROAD FOR THE SHANKS TO GO INSIDE, WITHOUT NAILS AND USING EPOXY RESIN BASED ADHESIVE AS PER MANUFACTURER?S RECOMMENDATION AND COMPLETE AS DIRECTED BY THE ENGINEER. THE CONTRACTOR SHALL SUBMIT A TWO YEAR WARRANTY FOR SATISFACTORY FIELD PERFORMANCE INCLUDING STIPULATED RETRO-REFLECTANCE OF THE REFLECTING PANEL,TO THE ENGINEER. MORTH 804 |
| 7 | PROVIDING AND FIXING MANDATORY/REGULATORY SIGN BOARDS IN CIRCULAR SHAPE OF 600 MM DIAMADE OUT OF 1.5MM ALUMINUM SHEET BONDED WITH WHITE RETRO REFLECTIVE SHEETING OFCLASS B ( TYPE IV HIGH INTENSITY MICRO-PRISMATIC GRADE SHEETING-HIP) HAVING PRESSURE SENSITIVE/HEAT ACTIVATED ADHESIVE RETOREFLECTIVE SPECIFIED BACK GROUND, BORDER AND BACK SIDE RETOREFLCTIVE SYMBOLS, LETTERS, NUMERALS, ARROW AS PER IRC:67-2012 TABLE NO 8.3SUPPORTED ON ONE NO. OFM. S. ANGLE IRON POST OF SIZE65 MM X 65 MM X 6 MM, 3.45 M LONG,DULY PAINTEDWITHWITH FLAT OIL PAINT HAVING ALTERNATE BLACK AND WHITE BANDS OF 25 CM WIDTH INCLUDING G.I. FIXTURES ETC; FIXING THE BOARDS IN M25 GRADE CONCRETE BLOCK OF SIZE 60CM X 60CM X 75CM INCLUDING TRANSPORTATION ETC; COMPLETE. CLASS B ( TYPE IV HIGH INTENSITY MICRO-PRISMATIC GRADE SHEETING-HIP) SHALL HAVE 7 YEARS WRITTEN WARRANTYFROM THE MANUFACTURER & AUTHORISED DISTRIBUTOR/CONVERTOR ISSUED FOR FIELD PERFORMANCE INCLUDING THE SCREEN PRINTED AREAS AND CUT-OUT SHEETING AND CUT-OUT DURABLE TRANSPARENT OVERLAY FILM AND THIS WARRANTY CERTIFICATEIN ORIGINAL SHOULD BE SUBMITTED TO THE ENGINEER IN CHARGE BY THE CONTRACTOR/ SUPPLIER. MORTH 801 |
| 8 | PAINTING LINE, DASHES, ARROWS ETC ON ROADS IN TWO COATS ON NEW WORK WITH READY MIXED ROAD MARKING PAINT CONFIRMING TO I.S. 164 ON BITUMINOUS SURFACE INCLUDING CLEANING THE SURFACE OF ALL DIRT, DUST AND OTHER FOREIGN MATTER, DEMARCATION AT SITE AND TRAFFIC CONTROL (OVER 10CM WIDE) (MORTH-803) -- NEW SURFACE MORTH 803 |
| 9 | ROAD MARKING WITH HOT APPLIED THERMOPLASTIC COMPOUND WITH REFLECTORIZING GLASS BEADS ON BITUMINOUS SURFACE- PROVIDING AND LAYING OF HOT APPLIED THERMOPLASTIC COMPOUND 2.5 MM THICK INCLUDING REFLECTORIZING GLASS BEADS @ 250 GMS PER SQM AREA, THICKNESS OF 2.5 MM IS EXCLUSIVE OF SURFACE APPLIED GLASS BEADS AS PER IRC:35 .THE FINISHED SURFACE TO BE LEVEL, UNIFORM AND FREE FROM STREAKS AND HOLES COMPLETE. MORTH 803.4 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
