}

Tender For Provision Of Addl / Altn Of Ors And Jcos Accn At Cob Sugnu Of Kakching Bn, Kakching-Manipur

Assam Rifles-AR has published Tender For Provision Of Addl / Altn Of Ors And Jcos Accn At Cob Sugnu Of Kakching Bn. Submission Date for this Tender is 14-02-2023. Building Work Tenders in Kakching Manipur. Bidders can get complete Tender details and download the document.




Tender Notice

36021364
Tender For Provision Of Addl / Altn Of Ors And Jcos Accn At Cob Sugnu Of Kakching Bn
Open Tender
Indian
Manipur
Kakching
14-02-2023

Tender Details

Provision Of Addl / Altn Of Ors And Jcos Accn At Cob Sugnu Of Kakching Bn

Key Value

Document Fees
INR 500 /-
EMD
INR 10200.0 /-
Tender Value
INR 5.09 Lakhs /-

BOQ Items

Name of Work: PROVN OF ADDL/ALTN OF ORs AND JCOs ACCN AT COB SUGNU OF KAKCHING BN.
Sl. No. Item Description
1SCHEDULE‘A’ PART-I (REPAIR/MAINT WORK)
2Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
3Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
4Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
515 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
6Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
7Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
8Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)
9Providing and fixing wind ties of 40x 6 mm flat iron section to roof incl securing both both cutting, drilling etc.
10Providing and laying rectified Glazed Ceramic floor tiles of size 400x400 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
11Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade and colour complete one or more coats on old walls/ceiling incl removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
12Finishing external walls with Acrylic Smooth exterior paint of required shade :old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
14Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats
15Chequrred precast cement conc tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with dark shade pigments to match the shade of tiles, incl rubbish and cleaning etc complete on 20 mm thick bed of cement mortar 1:4
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail