}

Tender For Up-Gradation Of 21 Health Sub Centres Into Ayush Health And Wellness Centres At Charkhi Dadri District In Haryana, dadri-Haryana

Hll Lifecare Limited-HLL has published Tender For Up-Gradation Of 21 Health Sub Centres Into Ayush Health And Wellness Centres At Charkhi Dadri District In Haryana. Submission Date for this Tender is 09-02-2023. Building Work Tenders in dadri Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

35794949
Corrigendum : Tender For Up-Gradation Of 21 Health Sub Centres Into Ayush Health And Wellness Centres At Charkhi Dadri District In Haryana
Open Tender
Indian
Haryana
dadri
09-02-2023

Tender Details

Up-Gradation Of 21 Health Sub Centres Into Ayush Health And Wellness Centres At Charkhi Dadri District In Haryana Civil And Electrical Works For Up-Gradation Of 21 Health Sub Centres Into Ayush Health And Wellness Centres At Charkhi Dadri District In Haryana

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-Jan-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 01-02-2023
2 01-Feb-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 06-02-2023
3 06-Feb-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 09-02-2023

Key Value

Document Fees
INR 1500 /-
EMD
INR 150000.0 /-
Tender Value
INR 71.03 Lakhs /-

BOQ Items

Name of Work: Civil and Electrical Works for Upgradation of Health Sub Centre into AYUSH Health and Wellness Centres at SC LAMBA In Charkhi Dadri District in the state of Haryana
Sl. No. Item Description
1PLASTERING
2Cement plaster of thickness 6mm to 10 mm of mix 1:3 (1 cement: 3 fine sand) all completeas per the direction of Engineer-In-Charge.
3Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
4Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
5FLOORING
6Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
7Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm.
8Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
9DISMANTLING
10Hacking ofCC flooring including cleaning for surface etc. Complete as per direction of the Engineer in-Charge
11Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
12PAINTING
13Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
14Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall
15Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
16Painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
17Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture .
18Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
19Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
20DOOR AND WINDOWS - REPAIRING & REPLACEMENT
21Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge
22Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. PTMT Tower bolt 152x42x18mm
23Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
24PLUMBING
25Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank
26Providing and fixing gun metal gate valve with C.I. wheel of approved quality -25MM
27Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ,15mm nominal bore
28Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including paintingof fittings and brackets, cutting and making good the walls whereverrequire:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
29Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
30Providing and fixing PVC Waste pipe for sink or wash basin including PVC waste fittings complete.:Semi rigid pipe 32mm dia
31Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
32Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
33Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating
34Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore with long nose
35Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes
36Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes
37Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
38Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
39Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
40Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
41Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
42BRANDING
43Printing,supplying, mounting of Name board& Logos on framing the same in 3 mm premium quality ACP sheet as sticker type facade branding(on brick and RCC walls) in proper line & level. The facade branding design , Hospital Name shall be made with premium quality vinyl sheet of approved colour, pasted on 3mm thick premium quality aluminium composite panel (ACP) backing of approved colour, including supply of all material labour etc. required for proper completion of work. Before making the signage text & font of letters in best fit size will be set in computer so as to give aesthetic look as per sample available with HLL. Actual size will be as per design setting in the computer etc. complete in all respects as per direction of Engineer-in-charge. Logos 6, Ayushman Bharat Board, Doors & Windows.
44IEC AND SIGNAGES
45Supply and fixing sticker type Posters at site (on door/walls or similar locations) in proper line & level. The signage letters shall be made with premium quality vinyl sheet of approved colour, pasted on 3 mm thick premium quality sunboard backing with slots for removable name plate strips of approved colour, including supply of all material labour etc. required for proper completion of work. Before making the signage text & font of letters in best fit size will be set in computer so as to give aesthetic look as per sample available with HLL. The sizes of signage given below are indicative only. Actual size will be as per text setting in the computer.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail