Military Engineer Services-MES has published Tender For Provision Of Exhaust Fan At Government Married Accommodation Qty 568 At Fafa Thimayya Park And Certain Other Sanctioned Work Under Ge (East) Jalandhar Cantt. Submission Date for this Tender is 05-01-2023. Ceiling Fan Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 22-Dec-2022 | CORRIGENDUM NO. 01 | BOQ | 29-12-2022 |
2 | 29-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-01-2023 |
Sl. No. | Item Description |
1 | Surface dressing not exceeding 15cm deep in hard/ dense soil complete all as specified and directed |
2 | Excavation in trenches in soft /loose soil, n. exc. 1.5 m wide and n. exc. 1.5m in depth for pipe line drains and getting out complete all as specified and directed. |
3 | All as per item No. 2.00 but depth exc. 1.5m and n. exc. 3.0m. |
4 | Excavation over areas n.exc. 1.5m in depth for pipe line drains and getting out in soft/ loose soil complete all as specified and directed |
5 | All as per item No. 4.00 but depth exc. 1.5m and n. exc. 3.0m. |
6 | All as per item No. 4.00 but depth exc. 3.0m and n. exc. 4.5m. |
7 | All as per item No. 4.00 but depth exc. 4.5m and n. exc. 6.0m. |
8 | Material and labour for brick work with old size sub class "B" bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) including corbelling and arches where shown on drawings, raking out joint internally and flush pointing externally as the work proceeds, complete all as specified and directed |
9 | Material and labour for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar (1:3) complete all as specified and directed. |
10 | Material and labour for aggregate for loose filling of gauge 80mm to 150mm graded complete all as specified and directed |
11 | Material and labour reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
12 | Material and labour reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed. |
13 | Material and labour for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed. |
14 | Material and labour for Providing precast cement concrete type B1(1:2:4) using 20mm graded stone aggregate as in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) including necessary formwork complete all as specified and directed |
15 | Material and labour plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching for manholes, bands, coping bed plate and for embedding rungs etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified and directed. |
16 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed. |
17 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed |
18 | Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately. |
19 | Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitered/ stopped ends complete all as specified and directed |
20 | Add to or deduct from Srl Item No. 19.00 here-in-before but for every 25mm girth or part thereof over or under 30cm, complete all as specified and directed |
21 | Supply only integral water proofing compound all as specified and directed. |
22 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
23 | Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
24 | Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc confirming to Gde Fe-410-W (Gde -E-250) quality "A" complete all as specified and directed. |
25 | Supply and fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed |
26 | Material and labour preparation of new or previously untreated steel surfaces of any description, n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
27 | Material and labour for 150mm bore RCC pipe (ISI Marked), class NP3, laid and jointed in cement mortar with collars, laid in trenches at any depth and tested complete all as specified and directed. Note : Excavation earth work & concrete shall be paid separately. |
28 | Material and labour for 200mm bore RCC pipe (ISI Marked), class NP3, laid and jointed in cement mortar with collars, laid in trenches at any depth and tested complete all as specified and directed. Note : Excavation earth work & concrete shall be paid separately. |
29 | Material and labour PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
30 | Material and labour PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
31 | Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed.. |
32 | Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
33 | Supply and fixing cast iron soil, waste and vent pipes of size 100mm in any length with or without ears, with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed |
34 | Supply and fixing cast iron soil, waste and vent pipes of size 75mm in any length with or without ears, with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed |
35 | Supply and fixing 110mm bore cast iron vent cowls complete all as specified and directed. |
36 | Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 110mm bore pipe complete all as specified and directed. |
37 | Dismantling of brick tiles single layer as in roof covering all as specified and directed. |
38 | Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed |
39 | Material and labour for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed |
40 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed |
41 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Note : Application should be done with Graco sprayer by a company authorised applicator. |
42 | Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed |
43 | Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed. |
44 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
45 | Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one fan point controlled by one switch complete all as specified and as directed. |
46 | Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified. |
47 | Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified. |
48 | Supply and fixing exhaust fan, 300 mm sweep, 900 rpm, single phase, 230 volt, heavy duty, with lowered shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal,fixing the fan on wall with suitable size of nut, bolt & washer complete all as specified and directed by Engineer-in-Charge. |
49 | Supply and fixing exhaust fan, 225/230 mm sweep, single phase, 230 volt, with lowered shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal,fixing the fan on wall with suitable size of nut, bolt & washer complete all as specified and directed by Engineer-in-Charge. |
50 | Material and labour for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed |
51 | Material and labour for cutting holes for exhaust fan of size 250mm dia sweep in brick walls built in cement mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail