Public Health Engineer Organisation has published Tender For Improvement Of System For Sustainable Quantity And Quality Water Supply In Operational Zone-I In Angul Ulb Under Amrut 2.0. Submission Date for this Tender is 26-12-2022. Electrification Work Tenders in angul Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of 3.00 lakh ltr capacity x 25 mtr stagging RCC ESR, Pump house with pump driver rest shed, installation of pump sets with piping arrangement, extrnal and internal electrification etc. at 14 MLD WTP. |
2 | Supplying all materials, labour and T&P for Design, Drawing, Construction, Commissioning and testing of 3.00 lakh ltr. Capacity RCC ESR with 25 mtr stagging and piping arrangement up to 5.00 mtr from external surface as per specification and direction of EIC. |
3 | 3,00,000 ltr capacity RCC ESR |
4 | Construction of pump house with pump driver rest shed. |
5 | Supplying all labour and T&P for earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
6 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
7 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
8 | Supplying all materials, labour and T&P for Cement concrete (1:2:4) using 12 mm size CBHG Chips, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
9 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12mm size CBHG Chips on top of compound wall, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
10 | Supplying all materials, labour and T&P for Cutting, bending and binding of MS rods for RCC works including cost, conveyance and taxes of MS rod and binding wire to site etc. as per specification and direction ofEIC. |
11 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
12 | Column & Beam |
13 | Lintel Band |
14 | Chajja |
15 | Roof Slab |
16 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:4) in foundation and plinth using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
17 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in super structure using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
18 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the outside surface. |
19 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the inside surface. |
20 | Supplying all materials, labour and T&P for 6 mm thick cement plaster (1:4) for RCC surface finished smooth including closed deep chipping and slurry treatment etc. watering and curing with cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
21 | Supplying all materials, labour and T&P for fixing tiles in floor, treads of floor, landing on 25 mm thick bed of cement mortar (1:1) mixed with pigment to match the shed of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
22 | Supplying all material, labour and T&P for Fixing tile in dadoos, skirting and riser of steps on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixing with pigment to match the shade of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
23 | Supplying all materials, labour and T&P for fitting and fixing of M.S grill for door andM.S shutter with grill for windowmade of M.S Angle and sheet varrying fron 16 to 18 gauge with all locking arrangements and door and window grills made of M.S angle and 12 mm size square bar with all locking arrangements etc as per approved design etc. |
24 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
25 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
26 | Supplying all materials, labour and T&P forpainting two coats over a coat of priming on iron works including cost ofpaint and primeretc. as per specification and direction of EIC. |
27 | Supplying all materials, labour and T&P for 2.50 cm thick grading concrete with C.C (1:2:2) using6 mm size CBHG chips etc complete for new works. |
28 | Supplying and fixing of 250 x 125 x 6.90 mm size M.S Joist for fixing of chain pully (lifting and sliding) |
29 | Supplying and fixing of 2.00 ton capacity electic driven lifting and sliding chain pully as per direction of EIC. |
30 | Supplying all materials, labour and T&P for wiring of the pump house as per direction of EIC. |
31 | Supplying all materials, labour and T&P for providing Light point as per direction of EIC.(Wiring of pump house) |
32 | Supplying all materials, labour and T&P for providing Fan point as per direction of EIC. |
33 | Supplying all materials, labour and T&P for providing Plug point as per direction of EIC. |
34 | Supplying and fixing of 15 wall LED light. |
35 | Supplying, Fitting and Fixing of 48" ceiling fan of reputed male. |
36 | Supplying, fitting and fixing main earth with 32mm dia G.I. pipe C.I. cover and other jointing materials including earth excavation and refilling all complete as per electrical specification and direction of the EIC. |
37 | Supplying, fitting and fixing suitable earth bus bar for earthing connection (Copper Size 40 mm x 6 mm x 300 mm.) |
38 | Supply, Installation and commissioning ofcentrifugal pump set with suitable control pannel board starter as required etc. |
39 | 90 H.P Capacity Centrifugal Pump Set having 110 lps discharge against head of 40 mtr of any reputed make. |
40 | Suppling, Fitting and fixing of ATS control pannel of reputed make suitable to operate 90 to 100 HP centrifugal pump set as per specification and direction of EIC. |
41 | 90 HP Capacity ATS control pannel |
42 | Supplying and fixing of Kit Kat Rewireable (Procelein Fuse carrier & Base) with extension strips |
43 | 500 A / 415 V |
44 | Supplying and fixing of Heavy Duty Double Break Fuse Switches - HNC Fuse Type inclussive of 3 nos HBC Fuse Link. |
45 | 500 Amp Triple Pole & Neutral for Main Mainswitch. |
46 | 400 Amp Triple Pole & Neutral for sub-main mainswitch. |
47 | 200 Amp Triple Pole & Neutral for sub-main mainswitch. |
48 | Supplying and fixing of Heavy Duty Busbar Chamber.(Wall Mounted) |
49 | 630 A 4 way |
50 | Supplying all materials, labour and T&P for wiring with 3 x 19/16 PVC copper wire inside 50 mm dia PVC conduit pipe with No.6 G.I wire as running earth and other jointing materials. |
51 | Supply, Installation and commissioning ofHorizontal Submerssible Pump Sets for loading of ESR. |
52 | 20 H.P Capacity Horizontal Submerssible Pump Set having 28 lps discharge against head of 35 mtr of any reputed make. |
53 | Supplying, fitting & fixing of BCH make Star Delta control pannel board starter suitable to run submesible pump set having appropriate capacity Contactor, Single phasing preventor, BCH Timer, Pilot lamps, 0 to 500 Volt volt meter, 0 to 100 Amp. Ampire meter, 63 Amp bakelite kit kat with catrise fuse, Over load relay, Terminals, incoming wiring to panel board with suitablecopper wire, Indicator, No-volt coils etc. all complete with M.S. panel box. |
54 | 20 HP capacity |
55 | Supplying and fixing of 6 mm² 3 core flat copper submerssible cable |
56 | Supplying all materials, labour and T&P for installation of 250 KVA capacity electric transformer with construction of Sub-Station as per electric specification and direction of Engineer-in-charge. |
57 | 250 KVA capacity |
58 | 11 KV line with 160 x 160 mm GI pole. |
59 | Supplying and laying of 150 mm² 3.50 core Aluminium Armoured Cable of reputed make from transfoemer to pump house as per specification and direction of EIC. |
60 | Supplying all materials, labour and T&P for laying of MS pipe and specials in trenches including cutting the pipe to required length by gas cutting machine and laying in required alignment, welding of MS fittings and specials with pipes where ever required including hire and running charges of welding machine, cutting machine, generator set etc. with cost of welding rod, cost, conveyance and taxes of MS pipe to site etc. complete. |
61 | 323.90 mm dia M.S pipe line (7.10 mm thick). |
62 | 219.10 mm dia M.S pipe line (6.30 mm thick). |
63 | Cutting of MS pipe line as per site condition. |
64 | Welding of M.S pipe line as per site condition. |
65 | Cost of M.S fittings and specials as per site condition. |
66 | 300 mm dia M.S Flange (16 mm thick) |
67 | 200 mm dia M.S Flange (12 mm thick) |
68 | 150 mm dia M.S Flange (10 mm thick) |
69 | Supplying all materials, labour and T&P for painting two coats over a coat of priming on M.S pipes at the outside surface of the pipes and fittings etc. as per specification and direction of EIC. |
70 | Cost of Materials. |
71 | Cost of the following size C.I Sluice Valve & N.R Valve and C.I Foot Valve. |
72 | 200 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent make Cast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
73 | 200 mm diameter C.I Non-Return Valve (Rating PN-1.6) (Kirloskar / Vag/ Audco or equivalent make Cast Iron, Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends) |
74 | 200 mm dia C.I Foot Valve (Kirloskar / Vag/ Audco or equivalent make Cast Iron Swing Type Foot Valve IS .4038, PN.0.2 rating Flanged Joint) |
75 | Construction of approach road to pump house. |
76 | Supplying all labour and T&P for Earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
77 | Supplying all materials, labour and T&P for Filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
78 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
79 | Supplying all materials, labour and T&P for Cement concrete (1:2:4) using 12 mm size CBHG Chips, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
80 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
81 | Supplying and fixing of 80 mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made bu block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
82 | Construction of 5.00 lakh ltr RCC OGR, 3.00 lakh ltr capacity x 25 mtr stagging RCC ESR, Pump house, installation of pump sets with piping arrangement, extrnal and internal electrification etc. at Baniabahal. |
83 | Supplying all materials, labour and T&P for Design, Drawing, Construction, Commissioning and testing of 5.00 lakh ltr. Capacity RCC OGR and piping arrangement up to 5.00 mtr from external surface as per specification and direction of EIC. |
84 | 5,00,000 ltr. Capacity RCC OGR |
85 | Supplying all materials, labour and T&P for Design, Drawing, Construction, Commissioning and testing of 3.00 lakh ltr. Capacity RCC ESR with 25 mtr stagging and piping arrangement up to 5.00 mtr from external surface as per specification and direction of EIC. |
86 | 3,00,000 ltr capacity RCC ESR |
87 | Construction of 7.25 m x 4.50 m internal size sunkenpump house. |
88 | Supplying all labour and T&P for earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
89 | 1st depth of 1.50 m |
90 | 2nd depth of 1.50 m |
91 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
92 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
93 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12mm size CBHG Chips on top of compound wall, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
94 | Below GL beyond 1.50 m up to 4.50 mtr |
95 | In ground floor |
96 | Supplying all materials, labour and T&P for Cement concrete (1:2:4) using 12 mm size CBHG Chips, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
97 | Supplying all materials, labour and T&P for Cutting, bending and binding of MS rods for RCC works including cost, conveyance and taxes of MS rod and binding wire to site etc. as per specification and direction ofEIC. |
98 | Below GL beyond 1.50 m up to 4.50 mtr |
99 | In ground floor |
100 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
101 | RCC wall for sunken pump house |
102 | Below G.L beyond 1.50 m up to 7.50 mtr. |
103 | In ground floor |
104 | Column & Beam |
105 | Lintel Band |
106 | Chajja |
107 | Roof Slab |
108 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in foundation and plinth using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
109 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in super structure using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
110 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the outside surface. |
111 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the inside surface. |
112 | Supplying all materials, labour and T&P for 6 mm thick cement plaster (1:4) for RCC surface finished smooth including closed deep chipping and slurry treatment etc. watering and curing with cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
113 | Supplying all materials, labour and T&P for fixing tiles in floor, treads of floor, landing on 25 mm thick bed of cement mortar (1:1) mixed with pigment to match the shed of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
114 | Supplying all material, labour and T&P for Fixing tile in dadoos, skirting and riser of steps on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixing with pigment to match the shade of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
115 | Supplying all materials, labour and T&P for fitting and fixing of M.S door and window shutters made of M.S Angle and sheet varrying fron 16 to 18 gauge with all locking arrangements and door and window grills made of M.S angle and 12 mm size square bar with all locking arrangements etc as per approved design etc. |
116 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
117 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
118 | Supplying all materials, labour and T&P forpainting two coats over a coat of priming on iron works including cost ofpaint and primeretc. as per specification and direction of EIC. |
119 | Supplying all materials, labour and T&P for 2.50 cm thick grading concrete with C.C (1:2:2) using6 mm size CBHG chips etc complete for new works. |
120 | Supplying, fitting and fixing of Stainless steel of 304 grade in railing using 50 mm dia of 2 mm thick circular pipe as vertical member and 32 mm x 32 mm x 2 mm size square pipe as horizontal member as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
121 | Supplying and fixing of 250 x 125 x 6.90 mm size M.S Joist for fixing of chain pully (lifting and sliding) |
122 | Supplying and fixing of 2.00 ton capacity electic driven lifting and sliding chain pully as per direction of EIC. |
123 | Supplying all materials, labour and T&P for wiring of the pump house as per direction of EIC. |
124 | Supplying all materials, labour and T&P for providing Light point as per direction of EIC.(Wiring of pump house) |
125 | Supplying all materials, labour and T&P for providing Fan point as per direction of EIC. |
126 | Supplying all materials, labour and T&P for providing Plug point as per direction of EIC. |
127 | Supplying and fixing of 15 watt LEDlight. |
128 | Supplying, Fitting and Fixing of 48" ceiling fan of reputed male. |
129 | Supplying, fitting and fixing main earth with 32mm dia G.I. pipe C.I. cover and other jointing materials including earth excavation and refilling all complete as per electrical specification and direction of the EIC. |
130 | Supplying, fitting and fixing suitable earth bus bar for earthing connection (Copper Size 40 mm x 6 mm x 300 mm.) |
131 | Supplying and fixing of new generation energy saving & environmental friendly long life Versatile pressure die-case aluminium IP66 roadway luminair with high power LED as light source 60 Watt LED (LHETAXU7IN6J090). |
132 | Construction of compound wall around the OGR & pump house campus with RCC column framed 2.00 mtr height. |
133 | Supplying all labour and T&P for earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
134 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
135 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
136 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12mm size CBHG Chips for RCC works, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
137 | Supplying all materials, labour and T&P for Cutting, bending and binding of MS rods for RCC works including cost, conveyance and taxes of MS rod and binding wire to site etc. as per specification and direction ofEIC. |
138 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
139 | Column & Beam |
140 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in super structure using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
141 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the outside surface. |
142 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the inside surface. |
143 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
144 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
145 | Supplying all materials, labour and T&P for fitting and fixing of grill gate made of M.S Angle and square bar etc as per approved design etc. |
146 | Supplying all materials, labour and T&P forpainting two coats over a coat of priming on iron works including cost ofpaint and primeretc. as per specification and direction of EIC. |
147 | Site development, sand filling etc. |
148 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
149 | Supplying and fixing of 80 mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made bu block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
150 | Supply, Installation and commissioning ofcentrifugal pump set with suitable control pannel board starter as required etc. |
151 | 25 H.P Capacity Centrifugal Pump Set having 34 lps discharge against head of 35 mtr of any reputed make. |
152 | Suppling, Fitting and fixing of ATS control pannel of reputed make suitable to operate 25 HP centrifugal pump set as per specification and direction of EIC. |
153 | 25 HP Capacity ATS control pannel |
154 | Supplying and fixing of Kit Kat Rewireable (Procelein Fuse carrier & Base) with extension strips |
155 | 500 A / 415 V |
156 | Supplying and fixing of Heavy Duty Double Break Fuse Switches - HNC Fuse Type inclussive of 3 nos HBC Fuse Link. |
157 | 500 Amp Triple Pole & Neutral for Main Mainswitch. |
158 | 400 Amp Triple Pole & Neutral for sub-main mainswitch. |
159 | Supplying and fixing of Heavy Duty Busbar Chamber.(Wall Mounted) |
160 | 630 A 4 way |
161 | Supplying all materials, labour and T&P for wiring with 3 x 19/16 PVC copper wire inside 50 mm dia PVC conduit pipe with No.6 G.I wire as running earth and other jointing materials. |
162 | Supplying all materials, labour and T&P for installation of 100 KVA capacity electric transformer with construction of Sub-Station as per electric specification and direction of Engineer-in-charge. |
163 | 100 KVA capacity |
164 | 11 KV line with 160 x 160 mm GI pole. |
165 | Supplying and laying of 120 mm² 3.50 core Aluminium Armoured Cable of reputed make from transfoemer to pump house as per specification and direction of EIC. |
166 | Supply, Installation and commissioning ofVertical Submerssible Pump Sets for the existing Prodection Wells. |
167 | 10 H.P Capacity Vertical Submerssible Pump Set having 8 lps discharge against head of 55 mtr of any reputed make. |
168 | 5.00 H.P Capacity Vertical Submerssible Pump Set having 4 lps discharge against head of 55 mtr of any reputed make. |
169 | Supplying, fitting & fixing of BCH make Star Delta control pannel board starter suitable to run submesible pump set having appropriate capacity Contactor, Single phasing preventor, BCH Timer, Pilot lamps, 0 to 500 Volt volt meter, 0 to 100 Amp. Ampire meter, 63 Amp bakelite kit kat with catrise fuse, Over load relay, Terminals, incoming wiring to panel board with suitablecopper wire, Indicator, No-volt coils etc. all complete with M.S. panel box. |
170 | 10 HP capacity |
171 | 5 HP capacity |
172 | Renovation of Existing Pump Houses. |
173 | Supplying all labour and T&P for removing old lime or cement plaster from walls including racking out the joints 12 mm deep and removing the debries within 50 m lead as per direction of EIC. |
174 | Supplying all labour and T&P for dismentling and removing 2.50 cm thick A.S flooring including stacking the useful materials for reuse and removing the debries within 50 m lead as per direction of EIC. |
175 | Supplying all labour and T&P for dismentling and removing 2.50 cm thick grading concrete from roof slab, cleaning the surface, lowering and removing the debries within 50 m lead as per direction of EIC. |
176 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
177 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
178 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12 mm size CBHG Chips in foundation and floor / RCC works, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
179 | Supplying all materials, labour and T&P for fixing tiles in floor, treads of floor, landing on 25 mm thick bed of cement mortar (1:1) mixed with pigment to match the shed of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
180 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
181 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
182 | Supplying all materials, labour and T&P for fitting and fixing of M.S door and window shutters made of M.S Angle and sheet varrying fron 16 to 18 gauge with all locking arrangements and door and window grills made of M.S angle and 12 mm size square bar with all locking arrangements etc as per approved design etc. |
183 | Supplying all materials, labour and T&P forpainting two coats over a coat of priming on iron works including cost ofpaint and primeretc. as per specification and direction of Engineer-in charge. |
184 | Laying of Pipe Lines. |
185 | Supplying all labour and T&P for dismantling of cement concrete pavements by machanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 meters stacking serviceable and unservieable materials separately. |
186 | Supplying all labour and T&P for Earthwork in excavation in trenches for pipes including dressing and leveling the bed and depositing the soil within initial lead of 50 mtr and lift of 1.50 mtr in all kinds of soil as per specification and direction of EIC. |
187 | Supplying all labour and T&P for laying in trenches centrifugally cast (spun) Ductile ironpressure socket and spigot pipes Class K-7without cement mortar lining confirming to IS:8329 - 2000 of the following nominal dia as per specification etc. |
188 | 200 mm dia pipe line |
189 | 150 mm dia pipe line |
190 | Supplying all labour and T&P for providing push-on-joints conforming to IS:3114-1994centrifugally (Spun) Cast iron pipes or Ductile iron pipes using rubber gasket conforming to IS: 5382 of S.B.R quality including testing of joints as per specification and direction of EIC. |
191 | 200 mm dia Tyton Joint |
192 | 150 mm dia Tyton Joint |
193 | Supplying all labour and T&P for providing flanged joints conforming to IS: 3114-1994 to flanged C.I pipes and fittings of the following nominal dia including testing of the joints including cost of M.S bolts, nuts and rubber insertion as per specification. |
194 | 200 mm dia Flanged Joint |
195 | 150 mm dia Flanged Joint |
196 | Supplying all materials, labour and T&P for Filling pipe line trenches with sand well watered and rammed etc. including cost, conveyance, royalties andtaxes of all materials to site as per specification and direction ofEngineer-in-charge. |
197 | Supplying all materials, labour and T&P for Filling pipe line trenches with excavated earth well watered and rammed etc. as per specification and direction ofEIC. |
198 | Supplying all materials, labour and T&P for concreting the road cuttings after laying of the pipe line and making good the damages with C.C (1:1 1/2:3) using 12 mm size CBHG chips, watering and curring including cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
199 | Supplying all materials, labour and T&P for construction of the following size sluice valve chamber as per specification and direction of EIC |
200 | 0.90 x 0.90 mx 1.20 m internal size (16 Nos) |
201 | Earthwork in excavation of foundation in all kinds of soil. |
202 | Filling Foundation and Plinth with sand well watered and rammed. |
203 | C.C.(1:3:6) in foundation and floor using 40 mm size CBHG metal |
204 | 1st class Fly Ash brick work (1:4) in Foundation and plinth |
205 | 12 mm thick C.P (1:4) over brick work finished smooth at outside surface. |
206 | 12 mm thick C.P (1:4) with punning over brick work finished smooth at inside surface. |
207 | C.C. (1:½:3) for RCC work cover slab in 3 pieces (Precasted) |
208 | Cutting, bending and binding of M.S rods for RCC works |
209 | Centering and shutterinfg |
210 | Supplying all labour and T&P for conveying of the surplus earth from the work site to a distance within 5 km away by mechanical means as per specification and direction of EIC. |
211 | Supplying all materials, labour and T&P for laying of MS pipe and specials in trenches including cutting the pipe to required length by gas cutting machine and laying in required alignment, welding of MS fittings and specials with pipes where ever required including hire and running charges of welding machine, cutting machine, generator set etc. with cost of welding rod, cost, conveyance and taxes of MS pipe to site etc. complete. |
212 | Pipe Line in Straight portion |
213 | 219.10 mm dia MS pipe line (6.30 mm thick). |
214 | 168.30 mm dia M.S pipe line (4.50 mm thick). |
215 | Cutting of MS pipe line as per site condition. |
216 | Welding of G.I pipe line as per site condition. |
217 | Cost of M.S fittings and specials as per site condition. |
218 | 200 mm dia M.S Flange (12 mm thick) |
219 | 150 mm dia M.S Flange (10 mm thick) |
220 | Supplying all materials, labour and T&P for painting two coats over a coat of priming on M.S pipes at the outside surface of the pipes and fittings etc. as per specification and direction of EIC. |
221 | Cost of Materials. |
222 | Cost of DI Fittings and Specials including laying charges. |
223 | Cost of the following size C.I Sluice Valve & N.R Valve and C.I Foot Valve. |
224 | 200 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
225 | 150 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
226 | 200 mm diameter C.I Non-Return Valve (Rating PN-1.6) (Kirloskar / Vag/ Audco or equivalent make Cast Iron, Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends) |
227 | 200 mm dia C.I Foot Valve (Kirloskar / Vag/ Audco or equivalent make Cast Iron Swing Type Foot Valve IS .4038, PN.0.2 rating Flanged Joint) |
228 | Construction of 3 lakh ltr capacity RCC ESR, Construction of Pump house, Installation of pump sets, External & Internal electrification and piping arrangement at Hemasurpada. |
229 | Supplying all materials, labour and T&P for Design, Drawing, Construction, Commissioning and testing of 3.00 lakh ltr. Capacity RCC ESR with 25 mtr stagging and piping arrangement up to 5.00 mtr from external surface as per specification and direction of EIC. |
230 | 3,00,000 ltr capacity RCC ESR |
231 | Construction of 8.25 m x 7.25 m internal size RCC column framed pump house. |
232 | Supplying all labour and T&P for earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
233 | 1st depth of 1.50 m |
234 | 2nd depth of 1.50 m |
235 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
236 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
237 | Below GL beyond 1.50 m up to 4.50 mtr |
238 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12mm size CBHG Chips on top of compound wall, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
239 | Below GL beyond 1.50 m up to 4.50 mtr |
240 | In ground floor |
241 | Supplying all materials, labour and T&P for Cement concrete (1:2:4) using 12 mm size CBHG Chips, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
242 | Supplying all materials, labour and T&P for Cutting, bending and binding of MS rods for RCC works including cost, conveyance and taxes of MS rod and binding wire to site etc. as per specification and direction ofEIC. |
243 | Below GL beyond 1.50 m up to 4.50 mtr |
244 | In ground floor |
245 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
246 | RCC wall for sunken pump house |
247 | Below G.L beyond 1.50 m up to 7.50 mtr. |
248 | In ground floor |
249 | Column & Beam |
250 | Lintel Band |
251 | Chajja |
252 | Roof Slab |
253 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in foundation and plinth using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
254 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in super structure using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
255 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the outside surface. |
256 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the inside surface. |
257 | Supplying all materials, labour and T&P for 6 mm thick cement plaster (1:4) for RCC surface finished smooth including closed deep chipping and slurry treatment etc. watering and curing with cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
258 | Supplying all materials, labour and T&P for fixing tiles in floor, treads of floor, landing on 25 mm thick bed of cement mortar (1:1) mixed with pigment to match the shed of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
259 | Supplying all material, labour and T&P for Fixing tile in dadoos, skirting and riser of steps on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixing with pigment to match the shade of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
260 | Supplying all materials, labour and T&P for fitting and fixing of M.S door and window shutters made of M.S Angle and sheet varrying fron 16 to 18 gauge with all locking arrangements and door and window grills made of M.S angle and 12 mm size square bar with all locking arrangements etc as per approved design etc. |
261 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
262 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
263 | Supplying all materials, labour and T&P forpainting two coats over a coat of priming on iron works including cost ofpaint and primeretc. as per specification and direction of EIC. |
264 | Supplying all materials, labour and T&P for 2.50 cm thick grading concrete with C.C (1:2:2) using6 mm size CBHG chips etc complete for new works. |
265 | Supplying, fitting and fixing of Stainless steel of 304 grade in railing using 50 mm dia of 2 mm thick circular pipe as vertical member and 32 mm x 32 mm x 2 mm size square pipe as horizontal member as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
266 | Supplying and fixing of 250 x 125 x 6.90 mm size M.S Joist for fixing of chain pully (lifting and sliding) |
267 | Supplying and fixing of 2.00 ton capacity electic driven lifting and sliding chain pully as per direction of EIC. |
268 | Supplying all materials, labour and T&P for wiring of the pump house as per direction of EIC. |
269 | Supplying all materials, labour and T&P for providing Light point as per direction of EIC.(Wiring of pump house) |
270 | Supplying all materials, labour and T&P for providing Fan point as per direction of EIC. |
271 | Supplying all materials, labour and T&P for providing Plug point as per direction of EIC. |
272 | Supplying and fixing of 15 watt LEDlight. |
273 | Supplying, Fitting and Fixing of 48" ceiling fan of reputed male. |
274 | Supplying, fitting and fixing main earth with 32mm dia G.I. pipe C.I. cover and other jointing materials including earth excavation and refilling all complete as per electrical specification and direction of the EIC. |
275 | Supplying, fitting and fixing suitable earth bus bar for earthing connection (Copper Size 40 mm x 6 mm x 300 mm.) |
276 | Supply, Installation and commissioning ofcentrifugal pump set with suitable control pannel board starter as required etc. |
277 | 25 H.P Capacity Centrifugal Pump Set having 34 lps discharge against head of 35 mtr of any reputed make. |
278 | Suppling, Fitting and fixing of ATS control pannel of reputed make suitable to operate 25 HP centrifugal pump set as per specification and direction of EIC. |
279 | 25 HP Capacity ATS control pannel |
280 | Supplying and fixing of Kit Kat Rewireable (Procelein Fuse carrier & Base) with extension strips |
281 | 500 A / 415 V |
282 | Supplying and fixing of Heavy Duty Double Break Fuse Switches - HNC Fuse Type inclussive of 3 nos HBC Fuse Link. |
283 | 500 Amp Triple Pole & Neutral for Main Mainswitch. |
284 | 400 Amp Triple Pole & Neutral for sub-main mainswitch. |
285 | Supplying and fixing of Heavy Duty Busbar Chamber.(Wall Mounted) |
286 | 630 A 4 way |
287 | Supplying all materials, labour and T&P for wiring with 3 x 19/16 PVC copper wire inside 50 mm dia PVC conduit pipe with No.6 G.I wire as running earth and other jointing materials. |
288 | Supplying all materials, labour and T&P for installation of 250 KVA capacity electric transformer with construction of Sub-Station as per electric specification and direction of EIC. |
289 | 250 KVA capacity |
290 | 11 KV line with 160 x 160 mm GI pole. |
291 | Supplying and laying of 120 mm² 3.50 core Aluminium Armoured Cable of reputed make from transfoemer to pump house as per specification and direction of EIC. |
292 | Laying of Pipe Lines. |
293 | Supplying all materials, labour and T&P for construction of the following size sluice valve chamber as per specification and direction of EIC |
294 | 1.20 x 1.20 mx 1.20 m internal size = 1 Nos |
295 | Earthwork in excavation of foundation in all kinds of soil. |
296 | Filling Foundation and Plinth with sand well watered and rammed. |
297 | C.C.(1:3:6) in foundation and floor using 40 mm size CBHG metal |
298 | 1st class Fly Ash brick work (1:4) in Foundation and plinth |
299 | 12 mm thick C.P (1:4) over brick work finished smooth at outside surface. |
300 | 12 mm thick C.P (1:4) with punning over brick work finished smooth at inside surface. |
301 | C.C. (1:½:3) for RCC work cover slab in 3 pieces (Precasted) |
302 | Cutting, bending and binding of M.S rods for RCC works |
303 | Centering and shutterinfg |
304 | Supplying all materials, labour and T&P for laying of MS pipe and specials in trenches including cutting the pipe to required length by gas cutting machine and laying in required alignment, welding of MS fittings and specials with pipes where ever required including hire and running charges of welding machine, cutting machine, generator set etc. with cost of welding rod, cost, conveyance and taxes of MS pipe to site etc. complete. |
305 | Pipe Line in Straight portion |
306 | 273.00 mm dia M.S pipe line (6.30 mm thick). |
307 | 219.10 mm dia M.S pipe line (6.30 mm thick). |
308 | Cutting of MS pipe line as per site condition. |
309 | Welding of M.S pipe line as per site condition. |
310 | Cost of M.S fittings and specials as per site condition. |
311 | 250 mm dia M.S Flange (12 mm thick) |
312 | 200 mm dia M.S Flange (12 mm thick) |
313 | 150 mm dia M.S Flange (10 mm thick) |
314 | Supplying all materials, labour and T&P for painting two coats over a coat of priming on M.S pipes at the outside surface of the pipes and fittings etc. as per specification and direction of EIC. |
315 | Cost of Fittings and Specials. |
316 | Cost of the following size C.I Sluice Valve & N.R Valve and C.I Foot Valve. |
317 | 250 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
318 | 200 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
319 | 200 mm diameter C.I Non-Return Valve (Rating PN-1.6) (Kirloskar / Vag/ Audco or equivalent make Cast Iron, Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends) |
320 | 200 mm dia C.I Foot Valve (Kirloskar / Vag/ Audco or equivalent make Cast Iron Swing Type Foot Valve IS .4038, PN.0.2 rating Flanged Joint) |
321 | Construction of approach road to pump house |
322 | Supplying all labour and T&P for Earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
323 | Supplying all materials, labour and T&P for Filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
324 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
325 | Supplying all materials, labour and T&P for Cement concrete (1:2:4) using 12 mm size CBHG Chips, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
326 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
327 | Guard wall |
328 | Supplying and fixing of 80 mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made bu block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
329 | Construction of 5 lakh ltr capacity RCC OGR, Construction of Pump house, Installation of pump sets, External & Internal electrification and piping arrangement at Lecture"s Colony. |
330 | Supplying all materials, labour and T&P for Design, Drawing, Construction, Commissioning and testing of 5.00 lakh ltr. Capacity RCC OGR and piping arrangement up to 5.00 mtr from external surface as per specification and direction of EIC. |
331 | 5,00,000 ltr. Capacity RCC OGR |
332 | Construction of 7.25 m x 4.50 m internal size sunkenpump house. |
333 | Supplying all labour and T&P for earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
334 | 1st depth of 1.50 m |
335 | 2nd depth of 1.50 m |
336 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
337 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
338 | Below GL beyond 1.50 m up to 4.50 mtr |
339 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12mm size CBHG Chips on top of compound wall, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
340 | Below GL beyond 1.50 m up to 4.50 mtr |
341 | In ground floor |
342 | Supplying all materials, labour and T&P for Cement concrete (1:2:4) using 12 mm size CBHG Chips, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
343 | Supplying all materials, labour and T&P for Cutting, bending and binding of MS rods for RCC works including cost, conveyance and taxes of MS rod and binding wire to site etc. as per specification and direction ofEIC. |
344 | Below GL beyond 1.50 m up to 4.50 mtr |
345 | In ground floor |
346 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
347 | RCC wall for sunken pump house |
348 | Below G.L beyond 1.50 m up to 7.50 mtr. |
349 | In ground floor |
350 | Column & Beam |
351 | Lintel Band |
352 | Chajja |
353 | Roof Slab |
354 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in foundation and plinth using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
355 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in super structure using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
356 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the outside surface. |
357 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the inside surface. |
358 | Supplying all materials, labour and T&P for 6 mm thick cement plaster (1:4) for RCC surface finished smooth including closed deep chipping and slurry treatment etc. watering and curing with cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
359 | Supplying all materials, labour and T&P for fixing tiles in floor, treads of floor, landing on 25 mm thick bed of cement mortar (1:1) mixed with pigment to match the shed of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
360 | Supplying all material, labour and T&P for Fixing tile in dadoos, skirting and riser of steps on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixing with pigment to match the shade of the tiles including rubbing and polishing including cost of vetrified tiles as per specification and direction of EIC. |
361 | Supplying all materials, labour and T&P for fitting and fixing of M.S door and window shutters made of M.S Angle and sheet varrying fron 16 to 18 gauge with all locking arrangements and door and window grills made of M.S angle and 12 mm size square bar with all locking arrangements etc as per approved design etc. |
362 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
363 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
364 | Supplying all materials, labour and T&P forpainting two coats over a coat of priming on iron works including cost ofpaint and primeretc. as per specification and direction of EIC. |
365 | Supplying all materials, labour and T&P for 2.50 cm thick grading concrete with C.C (1:2:2) using6 mm size CBHG chips etc complete for new works. |
366 | Supplying, fitting and fixing of Stainless steel of 304 grade in railing using 50 mm dia of 2 mm thick circular pipe as vertical member and 32 mm x 32 mm x 2 mm size square pipe as horizontal member as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
367 | Supplying and fixing of 250 x 125 x 6.90 mm size M.S Joist for fixing of chain pully (lifting and sliding) |
368 | Supplying and fixing of 2.00 ton capacity electic driven lifting and sliding chain pully as per direction of EIC. |
369 | Supplying all materials, labour and T&P for wiring of the pump house as per direction of EIC. |
370 | Supplying all materials, labour and T&P for providing Light point as per direction of EIC.(Wiring of pump house) |
371 | Supplying all materials, labour and T&P for providing Fan point as per direction of EIC. |
372 | Supplying all materials, labour and T&P for providing Plug point as per direction of EIC. |
373 | Supplying and fixing of 15 watt LEDlight. |
374 | Supplying, Fitting and Fixing of 48" ceiling fan of reputed male. |
375 | Supplying, fitting and fixing main earth with 32mm dia G.I. pipe C.I. cover and other jointing materials including earth excavation and refilling all complete as per electrical specification and direction of the EIC. |
376 | Supplying, fitting and fixing suitable earth bus bar for earthing connection (Copper Size 40 mm x 6 mm x 300 mm.) |
377 | Construction of compound wall around the OGR & pump house campus with RCC column framed 2.00 mtr height. |
378 | Supplying all labour and T&P for earthwork in excavation of foundation including dressing and leveling the bed and depositing the soil within initial lead and lift in all kinds of soil as per specification and direction of EIC. |
379 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
380 | Supplying all materials, labour and T&P for Cement concrete (1:3:6) using 40mm size CBHG metal in foundation and floor, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
381 | Supplying all materials, labour and T&P for Cement concrete (1:1 ½ :3) using 12mm size CBHG Chips for RCC works, watering and curingincluding cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
382 | Supplying all materials, labour and T&P for Cutting, bending and binding of MS rods for RCC works including cost, conveyance and taxes of MS rod and binding wire to site etc. as per specification and direction ofEIC. |
383 | Supplying all labour and T&P forRigid smooth centering and shuttering for RCC works including false work and dismantling then after casting etc. as per specification and direction ofEIC. |
384 | Column & Beam |
385 | Supplying all materials labour & T & P for fly ash brick masonry in C.M (1:6) in super structure using 25 cm x 12 cm x 8 cm size fly ash bricks having crussing strength 75 to 99 kg/cm², watering and curring with cost, conveyance, royalties and taxes of all meterials to site as per specification and direction of EIC. |
386 | Supplying all materials, labour and T&P for 12 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the outside surface. |
387 | Supplying all materials, labour and T&P for 16 mm thick cement plaster (1:6) over brick work finished smooth, watering and curing including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. at the inside surface. |
388 | Supplying all materials, labour and T&P for Finishing wall with one coat of wall primer water bound on new work |
389 | Supplying all materials, labour and T&P forFinishing walls with water weather coat paint of approved shade on new workstwo coats to be given including cost of weather coat paint etc as per specification and direction of EIC. |
390 | Site development, sand filling etc. |
391 | Supplying all materials, labour and T&P for filling foundation and plinth with sand well watered rammed including cost, conveyance, royalties and taxes of all materials to site etc. as per specification and direction of EIC. |
392 | Supplying and fixing of 80 mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made bu block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
393 | Supply, Installation and commissioning ofcentrifugal pump set with suitable control pannel board starter as required etc. |
394 | 25 H.P Capacity Centrifugal Pump Set having 34 lps discharge against head of 35 mtr of any reputed make. |
395 | Suppling, Fitting and fixing of ATS control pannel of reputed make suitable to operate 25 HP centrifugal pump set as per specification and direction of EIC. |
396 | 25 HP Capacity ATS control pannel |
397 | Supplying and fixing of Kit Kat Rewireable (Procelein Fuse carrier & Base) with extension strips |
398 | 500 A / 415 V |
399 | Supplying and fixing of Heavy Duty Double Break Fuse Switches - HNC Fuse Type inclussive of 3 nos HBC Fuse Link. |
400 | 500 Amp Triple Pole & Neutral for Main Mainswitch. |
401 | 400 Amp Triple Pole & Neutral for sub-main mainswitch. |
402 | Supplying and fixing of Heavy Duty Busbar Chamber.(Wall Mounted) |
403 | 630 A 4 way |
404 | Supplying all materials, labour and T&P for wiring with 3 x 19/16 PVC copper wire inside 50 mm dia PVC conduit pipe with No.6 G.I wire as running earth and other jointing materials. |
405 | Supplying all materials, labour and T&P for installation of 100 KVA capacity electric transformer with construction of Sub-Station as per electric specification and direction of EIC. |
406 | 100 KVA capacity |
407 | 11 KV line with 160 x 160 mm GI pole. |
408 | Supplying and laying of 120 mm² 3.50 core Aluminium Armoured Cable of reputed make from transfoemer to pump house as per specification and direction of EIC. |
409 | Supplying all materials, labour and T&P for laying of MS pipe and specials in trenches including cutting the pipe to required length by gas cutting machine and laying in required alignment, welding of MS fittings and specials with pipes where ever required including hire and running charges of welding machine, cutting machine, generator set etc. with cost of welding rod, cost, conveyance and taxes of MS pipe to site etc. complete. |
410 | 219.10 mm dia M.S pipe line (6.30 mm thick). |
411 | Cutting of MS pipe line as per site condition. |
412 | Welding of M.S pipe line as per site condition. |
413 | Cost of M.S fittings and specials as per site condition. |
414 | 200 mm dia M.S Flange (12 mm thick) |
415 | Supplying all materials, labour and T&P for painting two coats over a coat of priming on M.S pipes at the outside surface of the pipes and fittings etc. as per specification and direction of EIC. |
416 | Cost of Materials. |
417 | Cost of the following size C.I Sluice Valve & N.R Valve and C.I Foot Valve. |
418 | 200 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
419 | 200 mm diameter C.I Non-Return Valve (Rating PN-1.6) (Kirloskar / Vag/ Audco or equivalent make Cast Iron, Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends) |
420 | 200 mm dia C.I Foot Valve (Kirloskar / Vag/ Audco or equivalent make Cast Iron Swing Type Foot Valve IS .4038, PN.0.2 rating Flanged Joint) |
421 | Laying of Clear Water Rising Main. |
422 | Supplying all labour and T&P for dismantling of cement concrete pavements by machanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 meters stacking serviceable and unservieable materials separately. |
423 | Supplying all materials, dismentaling of bituminus cource of flexible pavements & disposal of dismental materials up to a lead of 1000 mtrs, stacking serviceable and unservieable materials separately. |
424 | Supplying all labour and T&P for Earthwork in excavation in trenches for pipes including dressing and leveling the bed and depositing the soil within initial lead of 50 mtr and lift of 1.50 mtr in all kinds of soil as per specification and direction of EIC. |
425 | Supplying all labour and T&P for laying in trenches centrifugally cast (spun) Ductile ironpressure socket and spigot pipes Class K-7without cement mortar lining confirming to IS:8329 - 2000 of the following nominal dia as per specification etc. |
426 | 350 mm dia D.I Pipe Class K-7 |
427 | 300 mm dia D.I Pipe Class K-7 |
428 | 250 mm dia D.I Pipe Class K-7 |
429 | 200 mm dia D.I Pipe Class K-7 |
430 | Supplying all labour and T&P for providing push-on-joints conforming to IS:3114-1994centrifugally (Spun) Cast iron pipes or Ductile iron pipes using rubber gasket conforming to IS: 5382 of S.B.R quality including testing of joints as per specification and direction of EIC. |
431 | 350 mm dia Tyton Joint |
432 | 300 mm dia Tyton Joint |
433 | 250 mm dia Tyton Joint |
434 | 200 mm dia Tyton Joint |
435 | Supplying all labour and T&P for providing flanged joints conforming to IS: 3114-1994 to flanged C.I pipes and fittings of the following nominal dia including testing of the joints including cost of M.S bolts, nuts and rubber insertion as per specification. |
436 | 350 mm dia Flanged Joint |
437 | 300 mm dia Flanged Joint |
438 | 250 mm dia Flanged Joint |
439 | 200 mm dia Flanged Joint |
440 | Supplying all materials, labour and T&P for Filling pipe line trenches with sand well watered and rammed etc. including cost, conveyance, royalties andtaxes of all materials to site as per specification and direction ofEngineer-in-charge. |
441 | Supplying all materials, labour and T&P for Filling pipe line trenches with excavated earth well watered and rammed etc. as per specification and direction ofEIC. |
442 | Supplying all materials, labour and T&P for concreting the road cuttings after laying of the pipe line and making good the damages with C.C (1:1 1/2:3) using 12 mm size CBHG chips, watering and curring including cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
443 | Supplying all materials, labour and T&P for construction of the following size sluice valve chamber as per specification and direction of EIC |
444 | 1.20 x 1.20 mx 1.20 m internal size |
445 | Earthwork in excavation of foundation in all kinds of soil. |
446 | Filling Foundation and Plinth with sand well watered and rammed. |
447 | C.C.(1:3:6) in foundation and floor using 40 mm size CBHG metal |
448 | 1st class Fly Ash brick work (1:4) in Foundation and plinth |
449 | 12 mm thick C.P (1:4) over brick work finished smooth at outside surface. |
450 | 12 mm thick C.P (1:4) with punning over brick work finished smooth at inside surface. |
451 | C.C. (1:½:3) for RCC work cover slab in 3 pieces (Precasted) |
452 | Cutting, bending and binding of M.S rods for RCC works |
453 | Centering and shutterinfg |
454 | Supplying all labour and T&P for conveying of the surplus earth from the work site to a distance within 5 km away by mechanical means as per specification and direction of EIC. |
455 | Supplying all materials, labour and T&P for laying of MS pipe and specials in trenches including cutting the pipe to required length by gas cutting machine and laying in required alignment, welding of MS fittings and specials with pipes where ever required including hire and running charges of welding machine, cutting machine, generator set etc. with cost of welding rod, cost, conveyance and taxes of MS pipe to site etc. complete. |
456 | Pipe Line in Straight portion |
457 | 355.60 mm dia MS pipe line (8.00 mm thick). |
458 | 323.90 mm dia M.S pipe line (7.10 mm thick). |
459 | 273.00 mm dia M.S pipe line (6.30 mm thick). |
460 | 219.10 mm dia M.S pipe line (6.30 mm thick). |
461 | Cutting of MS pipe line as per site condition. |
462 | Welding of M.S pipe line as per site condition. |
463 | Cost of M.S fittings and specials as per site condition. |
464 | 350 mm dia M.S Flange (16 mm thick) |
465 | 300 mm dia M.S Flange (16 mm thick) |
466 | 250 mm dia M.S Flange (12 mm thick) |
467 | 200 mm dia M.S Flange (12 mm thick) |
468 | 150 mm dia M.S Flange (10 mm thick) |
469 | Supplying all materials, labour and T&P for painting two coats over a coat of priming on M.S pipes at the outside surface of the pipes and fittings etc. as per specification and direction of EIC. |
470 | Cost of Materials. |
471 | Cost of DI Fittings and Specials including laying charges. |
472 | Cost of the following size C.I Sluice Valve & N.R Valve and C.I Foot Valve. |
473 | 350 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
474 | 250 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
475 | 200 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
476 | Replacement of old and outlived PVC pipe lines, Smaller diameter pipe lines and under road pipe lines atAmalapada, Hospital road, Mishrapada chhaka to Baniabahal, Hemasurpada area, Raj Hotel to Ghana Sahu Chhaka etc. |
477 | Supplying all labour and T&P for dismantling of cement concrete pavements by machanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 meters stacking serviceable and unservieable materials separately. |
478 | Supplying all materials, dismentaling of bituminus cource of flexible pavements & disposal of dismental materials up to a lead of 1000 mtrs, stacking serviceable and unservieable materials separately. |
479 | Supplying all labour and T&P for Earthwork in excavation in trenches for pipes including dressing and leveling the bed and depositing the soil within initial lead of 50 mtr and lift of 1.50 mtr in all kinds of soil as per specification and direction of EIC. |
480 | Supplying all labour and T&P for laying in trenches centrifugally cast (spun) Ductile ironpressure socket and spigot pipes Class K-7without cement mortar lining confirming to IS:8329 - 2000 of the following nominal dia as per specification etc. |
481 | 200 mm dia pipe line |
482 | 150 mm dia pipe line |
483 | 100 mm dia pipe line |
484 | Supplying all labour and T&P for providing push-on-joints conforming to IS:3114-1994centrifugally (Spun) Cast iron pipes or Ductile iron pipes using rubber gasket conforming to IS: 5382 of S.B.R quality including testing of joints as per specification and direction of EIC. |
485 | 200 mm dia Tyton Joint |
486 | 150 mm dia Tyton Joint |
487 | 100 mm dia Tyton Joint |
488 | Supplying all labour and T&P for providing flanged joints conforming to IS: 3114-1994 to flanged C.I pipes and fittings of the following nominal dia including testing of the joints including cost of M.S bolts, nuts and rubber insertion as per specification. |
489 | 200 mm dia Flanged Joint |
490 | 150 mm dia Flanged Joint |
491 | 100 mm dia Flanged Joint |
492 | Supplying all materials, labour and T&P for Filling pipe line trenches with sand well watered and rammed etc. including cost, conveyance, royalties andtaxes of all materials to site as per specification and direction ofEngineer-in-charge. |
493 | Supplying all materials, labour and T&P for Filling pipe line trenches with excavated earth well watered and rammed etc. as per specification and direction ofEIC. |
494 | Supplying all materials, labour and T&P for concreting the road cuttings after laying of the pipe line and making good the damages with C.C (1:1 1/2:3) using 12 mm size CBHG chips, watering and curring including cost, conveyance, royalties and taxes of all materials to site as per specification and direction of EIC. |
495 | Supplying all materials, labour and T&P for construction of the following size sluice valve chamber as per specification and direction of EIC |
496 | 0.90 x 0.90 mx 1.20 m internal size (23 Nos) |
497 | Earthwork in excavation of foundation in all kinds of soil. |
498 | Filling Foundation and Plinth with sand well watered and rammed. |
499 | C.C.(1:3:6) in foundation and floor using 40 mm size CBHG metal |
500 | 1st class Fly Ash brick work (1:4) in Foundation and plinth |
501 | 12 mm thick C.P (1:4) over brick work finished smooth at outside surface. |
502 | 12 mm thick C.P (1:4) with punning over brick work finished smooth at inside surface. |
503 | C.C. (1:½:3) for RCC work cover slab in 3 pieces (Precasted) |
504 | Cutting, bending and binding of M.S rods for RCC works |
505 | Centering and shutterinfg |
506 | Supplying all labour and T&P for conveying of the surplus earth from the work site to a distance within 5 km away by mechanical means as per specification and direction of EIC. |
507 | Supplying all materials, labour and T&P for laying of MS pipe and specials in trenches including cutting the pipe to required length by gas cutting machine and laying in required alignment, welding of MS fittings and specials with pipes where ever required including hire and running charges of welding machine, cutting machine, generator set etc. with cost of welding rod, cost, conveyance and taxes of MS pipe to site etc. complete. |
508 | Pipe Line in Straight portion |
509 | 219.10 mm dia MS pipe line (6.30 mm thick). |
510 | 168.30 mm dia M.S pipe line (4.50 mm thick). |
511 | 110 mm dia M.S pipe line (4.00 mm thick). |
512 | Cutting of MS pipe line as per site condition. |
513 | Welding of G.I pipe line as per site condition. |
514 | Cost of M.S fittings and specials as per site condition. |
515 | 200 mm dia M.S Flange (12 mm thick) |
516 | 150 mm dia M.S Flange (10 mm thick) |
517 | 100 mm dia M.S Flange (10 mm thick) |
518 | Supplying all materials, labour and T&P for painting two coats over a coat of priming on M.S pipes at the outside surface of the pipes and fittings etc. as per specification and direction of EIC. |
519 | Cost of DI Fittings and Specials including laying charges. |
520 | Cost of the following size C.I Sluice Valves with wheels. |
521 | 150 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
522 | 100 mm dia C.I Sluice Valve (Rating PN-1.6) with wheel (Kirloskar / Vag/ Audco or equivalent makeCast IronNon Rising Spindle type Sluice Valveconfirming to IS 14846) |
523 | Supplying all materials, labour and T&P for water supply pipe line connection to the existing consumers from the newly laid pipe line including cutting of concrete road, earthwork in excavation in trenches for pipes in all kinds of soil, laying of25 mm dia HDPE pipe line from the new pipe lineto consumer"s house, fixing of saddle of required size and 3/8" brass/gun metal ferrul including drilling hole in distribution main, refilling of excavated earth and mending the road cuttingwith C.C (1:1.5:3) and other sanitary works required for the work as per site condition, testing and commissioning etc. complete as per specification and direction of EIC. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail