Assam Petrochemicals Limited-APL has published Construction Of Structural Gate At The Approach Of Loadingyard To Facilitate Entry And Exit Of Tankers. Submission Date for this Tender is 23-12-2022. Gates Supply Tenders in guwahati Assam. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a proming coat of approved primer using structural steel etc. as required |
2 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. MS Tube. |
3 | Providing and fixing bolts including nuts and washers complete |
4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead up to 50M and lift up to 1.5M as directed by Engineer-in-charge |
5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
6 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering Proportion 1:3:6 |
7 | Providing and laying in position specified grade of concrete specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement.Proportion 1:1.5:3 |
8 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete at all level. TMT Fe 500D or more |
9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugations as approved by Engineer-in-charge |
10 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm total coated thickness, Zinc coating |
11 | Brick flat soling |
12 | Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases of columns etc. for mass concrete |
13 | Painting with synthetic enamel paint of approved brand and manufacture to give even shade. Two or more coats |
14 | Demolishing R.C.C. work manually/ by mechanical means including stacking of bars and disposal of unserviceable materials |
15 | Demolishing brick work manually/ by mechanical means including stacking of usable materials and disposal of unserviceable materials |
16 | Construction of granular sub-base by providing close graded Material conformung to specifications, mixing in a mechanical mix plant at OMC carriage of mixed materials by tippers to work site, for all leads &lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired density complete as per specification and direction of Engineer-in-charge. |
17 | Providing, laying, spreading and compacting graded stone aggregate (size range from 53mm to .075mm) to specification laying in uniform layer and compacting with vibratory roller of 8-10Tonne capacity to achieve the desired density complete as per specification and direction of Engineer-in-charge |
18 | GI gratings |
19 | Supplying , fitting and fixing and commissioning of Electric Chain hoist of capacity 2 tonne with 2 nos. of synchronized panels , 8mm dia chain( Grade-80) and Zinc plated hand chain. Motor shall be S4 Duty, 4 pole, class "F" insulation,ip55, 80% efficiency, power factor 0.77, Star connection, 3-phase 415V+/- 5% standard seat PCD. Power supply shall be of 415V, 3 phase, 50Hzwith control voltage 110V AC. Brake hoist should be Disc brake/EM (Dia150), Bearing should be double ball bearings. Control panel should be Siemen or L&T makewith IP 44 enlosure.Pendant-Up & Down, push buttons nylon body & water proof.Duty -Class-2 as per IS 3177/IS 807. |
20 | Supplying , fitting and fixing of Manual chain block of 2 Tonne capacity for Up&down movement. Load chain- 8mm dia grade -80Zinc plated. Hand chain-6mm dia grade -80IS 2429&IS 3832. Duty-Medium, Class-II, Bearings-Double ball bearings. CT wheel- En-8/Enp, single flanged IS 3177-1977. Painting- Chain block structure should be coated with two coats of primer and two coats of synthetic enamel paint. size should be- 220LX 185WX 570H |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail