}

Tender For Maintenance Of Mbb University Academic Building During The Year 2022 23 Sh Construction Of Boundary Wall And Sanitary Installations Etc, agartala-Tripura

Public Works Department-PWD has published Tender For Maintenance Of Mbb University Academic Building During The Year 2022 23 Sh Construction Of Boundary Wall And Sanitary Installations Etc. Submission Date for this Tender is 22-12-2022. Wall Construction Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

35107652
Tender For Maintenance Of Mbb University Academic Building During The Year 2022 23 Sh Construction Of Boundary Wall And Sanitary Installations Etc
Open Tender
Indian
Tripura
agartala
22-12-2022

Tender Details

Tender For Maintenance Of Mbb University Academic Building During The Year 2022 23 Sh Construction Of Boundary Wall And Sanitary Installations Etc

Key Value

Document Fees
INR 1000 /-
EMD
INR 55222.0 /-
Tender Value
INR 27.61 Lakhs /-

BOQ Items

Name of Work: Mtc. of MBB University (AcademicBuilding) during the year 2022-23/ SH: Construction of Boundary wall & sanitary installations etc.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. -All kinds of soil
2Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
3Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
4First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
5Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
6Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
7Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. i. Thermo-Mechanically Treated bars of grade Fe-500D or more
8Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.i. Thermo-Mechanically Treated bars of grade Fe-500D or more
9Centering shuttering including struttings, propping etc. and removal of form work for:i. Foundations, footings, bases for columns etc. for mass concrete with steel formwork
10ii. Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
11Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ).
1212 mm cement plaster of mixCement mortar 1:6 (1 cement : 6 fine sand)
13Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
14Finishing walls with textured exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge
15Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
16Providing and fixing water closet squatting pan (Indiantype W.C. pan ) with 100mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : i. White Vitreous china Orrisa pattern W.C. pan of size580x440 mm with integral type foot rests.
17Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : i. W.C. pan with ISI marked white solid plastic seat and lid
18Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.
19Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
20Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm
21Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
22Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia
23Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
24Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
25Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single socketed pipe - 110 mm OD
26Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. 110mm
27Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall15 mm nominal outer dia .Pipes.
2820 mm nominal outer dia .Pipes.
2925 mm nominal outer dia .Pipes.
3032 mm nominal outer dia .Pipes.
3140 mm nominal outer dia .Pipes
32Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work15 mm nominal outer dia .Pipes.
3320 mm nominal outer dia .Pipes.
3425 mm nominal outer dia .Pipes.
3532 mm nominal outer dia .Pipes.
3640 mm nominal outer dia .Pipes
37Providing and fixing brass bib cock of approved quality: 15 mm nominal bore
38Providing and fixing ball valve (brass) of approved quality complete : 15 mm nominal bore
3920 mm nominal bore
4025 mm nominal bore
41Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length15 mm nominal bore
4220 mm nominal bore
43Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter
44Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
45G.I Barbed Wire Fencing 1.8 m high Providing and fixing 1.8 m high GI barbed wire fencingwith 2.4 m RCC M15 grade 150 mm x 150 mm concretepost placed every3 m centre-to-centre founded in M15grade cement concrete, 0.6 m below ground level, every15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horitontal wires fixed with G.I. staples turn buckles, etc. complete as per MoRD technical specification clause 1705.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail