Ministry Of Environment And Forests and Climate Change-MoEFCC has published Tender For Construction Of Eco Tourism Works At Deomali Hill Of Semiliguda Forest Range Under Koraput Division During The Year 2022-23.. Submission Date for this Tender is 15-12-2022. Tour and Travel Agency Tenders in koraput Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014cum in volumeincluding dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts upto 50meter, including shoring, shuttering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 3 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . |
| 4 | Filling in foundation and plinth with excavated materials (Normal Soil) including watering and ramming as directed by the Engineer-in-charge of earth work. |
| 5 | Filling in foundation and plinth with excavated materials (Hard Soil)including watering and ramming as directed by the Engineer-in-charge of earth work. |
| 6 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 7 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-30 grade as per approved designs and drawings having a minimum compressive strength (in work test) 300 Each Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips Each Not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect with rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete as per specification and direction of Engineer-in-charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 8 | Column Post Base |
| 9 | Column Base |
| 10 | Column |
| 11 | Plinth Beam |
| 12 | Roof Beam |
| 13 | Roof Slab |
| 14 | Providing, fixing and placing ofTor steel (HYSD) Fe-500 IS 1786-2008 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and Each Each No separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost. |
| 15 | Supplying and fixing PVC coated GI jally, with all Hardware fittings, Clamps & accessories all as per drawing and specification including cost of transportation, fittings, fixing, Labour etc. completeas direction of the Engineer-In-Charge. |
| 16 | Painting 2 coats with any enamel paint on newwood work including cost of paintin all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 17 | Painting 2 coats with any enamel paint on newiron work including cost of paintin all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 18 | Labour for laying sub base with moorum in layers not exceeding 100mm watering and compacting to the required density in O.M.C. with PRR but excluding cost, conveyance of sub base materials etc.complete.A.R.Page-142 & Item no.8 |
| 19 | Providing and fixing Best quality Khandolite stone Carved Pieces in required sizes of Minimum Thickness of 75mm with carving work upto a depth of 50mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. ( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge). |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Approved make : Apollo, Bhusan, Jindal or approved equivalent |
| 21 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 22 | Providing 16mm thick cement plaster (inside )in all floors at all height with cement mortar of mix (1:6) with Portlandslag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 23 | Providing premium grade vitrified tile flooring 600mm X 600mm of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 24 | Providing and fixing 20mm thick Granite stone flooring(sample of Granitestone should be approved byEngineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
| 25 | Providing30cmx30cm/30cmx60cm size special plain/printed seriesceramic glazed wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge |
| 26 | Providing premium grade vitrified tile in risers and dadoos 600mm X 600mm of approved quality, colour and size in floors, in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper line with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 27 | Providing and fixing 20mm thick Granite stone in dadoos(sample of Granitestone should be approved byEngineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
| 28 | Supplying, fitting and fixing well dressed and well seasoned sal wood choukathsframed and fixed including two coats coats of coaltaring to wall and lintel side faces of choukaths including cost of coaltar and labour for coaltaring and fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws including cost, conveyance, loadingrequired for the work etc. complete in all respect with cost, conveyance, royalties, loading, unloading and taxes of all materials and cost of all labour, T&P, sundries, scaffolding etc. required for the work complete in all respect as per specification and direction of Engineer in Charge |
| 29 | Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand paperingin all heights etc. complete in all respect. |
| 30 | Providing and fixing 10mm fibre Cement board of SHERA or approved equivalent at outside of Framework duly screwed, fixed into framework along with waterprofing treatment to joints including required Stagging upto an height of 5Meter & also including cost of all material, all labour, scaffolding, transportation, erection but excluding GST etc. complete as per specification and as directed by Engineer-in-charge. Make Shera, Everest or approved equivalent |
| 31 | Providing and fixing 8mm fibre Cement boardof SHERA or approved equivalent at inside of Framework duly screwed, fixed into framework along with waterprofing treatment to joints , putty & colouring including required Stagging upto an height of 5Meter & also including cost of all material, all labour, scaffolding, transportation, erection but excluding GST etc. complete as per specification and as directed by Engineer-in-charge. Make Shera, Everest or approved equivalent |
| 32 | Providing and fixing 12mm fibre Cement boardof SHERA or approved equivalent at outside as roof member of Framework duly screwed, fixed into framework along with waterprofing treatment to joints including required Stagging upto an height of 5Meter & also including cost of all material, all labour, scaffolding, transportation, erection but excluding GST etc. complete as per specification and as directed by Engineer-in-charge. Make Shera, Everest or approved equivalent |
| 33 | Providing and fixing 8mm fibre Cement pre-textured, white coloured planksof SHERA or approved equivalent fixed over existing fibre cement board along with waterprofing treatment to joints including required Stagging upto an height of 5Meter & also including cost of all material, all labour, scaffolding, transportation, erection but excluding GST etc. complete as per specification and as directed by Engineer-in-charge. Make Shera, Everest or approved equivalent |
| 34 | Providing and Laying Water Proofing Treatment with Bitumin Felt over Roof including Preparation of Surface and Complete all as direction of the Engineer-In-Charge. |
| 35 | Supplying, fitting, fixing up Fenesta made Door with uPVC frame and PVC Panels with rubber beading, locking arrangement & all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. Make Fenesta, Komerling, Veka or approved equivalent. |
| 36 | Supplying, fitting, fixing up Fenesta made Two/Three track two/Three panel pre-coloured uPVC shutter frame with 5/6mm thick Reflective/Toughtened glass as panel fitted with rubber beading, locking arrangement & all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.Make Fenesta, Komerling, Veka or approved equivalent. |
| 37 | Providing and fixing 316 Grade Stainless Steel Grill of required patterns for windows/verandahs etc. with S.S, square or round bars etc. of approved Design make & shade, all complete as per drawing & specification. including cost of materials all taxes labour, T&P etc. complete at all floors and all heights. (All S.S sections contractor"s own supply) |
| 38 | Supplying fitting and fixing in position flush door shutter of 32mm thick with 1mm Laminate of approved quality and as per drawing & design with all necessary brass fittings, door closer (godrej) motrice lock (godrej),including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge. |
| 39 | SINGLE BED Providing, fitting & fixing Bed of 3"-6" width and 6"-4" depth using 19mm thick BWP plyfor framing all copmletely finished in 1mm thick Laminate (As per design). |
| 40 | Providing & fixing the Decorative items including cost of Material & labor with T&P etc. complete. |
| 41 | Dustbin |
| 42 | Bathroom Mirror |
| 43 | Dry Flower Base with Flower |
| 44 | Single Bedsit |
| 45 | Pillow |
| 46 | Pillow Cover |
| 47 | Window Screen |
| 48 | Towel |
| 49 | Napkin |
| 50 | Mattress of Size : 36" X 72" X 6" thickness |
| 51 | Quilted Blanket |
| 52 | Crockery/Coffee Table with 2 nos Chair |
| 53 | Coffee Maker |
| 54 | Study Table with 2 nos Chair. |
| 55 | Single seater Sofa |
| 56 | Providing & fixingat all levels and locations, informatory/ directional/warning signages in required font, design, pattern and sizemade of 4 mm thick odorless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color, of approved quality and make, with beveled edges having self adhesive self luminescent vinyl sheet ( film thickness >150 micron, luminescent duration 4-6 hours) of make 3M/ Avery or approved equivalent over which the signage/ letter cutout made of vinyl sheet ( film thickness > 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. |
| 57 | Providing & fixingat all levels and locations, informatory/ directional/warning signages in required font, design, pattern and sizemade of 4 mm thick odorless Acrylic sheets of make Cast/ Acrilite or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved colour, , with beveled edges having self adhesive self luminescent vinyl sheet ( film thickness >150 micron, luminescent duration 4-6 hours) of make 3M/ Avery or approved equivalenton both the faces of the acrylic sheet, pasted with signage/ letter cutout made of vinyl sheet ( film thickness >80 micron)of make 3M/ Avery or approved equivalentin required color, font, design, pattern, including fixing over walls/ partition/glass etc, hung with standard SS chains/ fixtures, studs etc as approved, all complete as per architectural drawings and direction of Engineer in charge. Edge to edge area of acrylic sheet shall be measured for payment. |
| 58 | Designing, supplying, and installation of Double Barrel with Stand & Cover Stainless Steel dustbins of size 300mm X 450mm including fitting and fixing on ground by concreting .with all cost of material transportation,taxes as directed by the E.I.C. |
| 59 | Providing & Fixing of Reclainer & Sitting Benches Made of Bamboo/Rattern as per Drawing/Design/Specification and complete all as direction of the Engineer-In-charge. |
| 60 | WATER SUPPLY & SANITATION |
| 61 | GPH Works: Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge. |
| 62 | 20 mm CPVCpipes (Oriplast/Supreme) |
| 63 | 25 mm CPVCpipes (Oriplast/Supreme) |
| 64 | 40 mm CPVCpipes (Oriplast/Supreme) |
| 65 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. |
| 66 | 250 mm thick wall |
| 67 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thickfor passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes afterinsertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of theEngineer-in-charge. |
| 68 | 250 mm thick wall |
| 69 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 70 | Supplying all materials, labour, T&P and fixing standard sized two wayBib cock ofHindware/Jaquar/Parrywareof approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two waybib cock with Flange Jaquar CON-CHR-041KN. |
| 71 | Supplying all materials, labour, T&P and fixing standard sizedBib cock ofHindware/Jaquar/Parrywareof approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Long body Bib Cock Jaquar-CON-CHR-047KN. |
| 72 | Supplying all materials, labour, T&P and fixing standard sized15mm dia angular Stop cock of Hindware/Jaquar/Parrywareof approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Jaquar CON-CHR-059KN. |
| 73 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock Jaquar Continental Cat. No.- CON -CHR-011KN. |
| 74 | Supplying all materials, labour, T&P and fixing100 mm dia wall mounted over head shower& Shower armHindware/Jaquar/Parryware including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineer-in-charge. 100 mm dia CP overhead shower with Arm (Jaquar -OHS--CHR-1989,Jaquar SHA-CHR- 483) |
| 75 | Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Hindware/Jaquar/Parrywareof approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. Concealed stop cock Jaquar CON-CHR--083FTK. |
| 76 | Fixing of 25mm dia Brass / Gun meta ball Valve confirming toIS : 781-1995 of approved makeas per specification complete as per direction of Er-in-charge.25mm dia brass or gun metal full way valve (shakti make) |
| 77 | Fixing of 40mm dia Brass / Gun meta ball Valve confirming toIS : 781-1995 ofof approved makeas per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve(shakti make) |
| 78 | 15mm dia PVC connection pipe 450 mm long |
| 79 | 15mm dia CP Extention Nipple |
| 80 | Providing and fixingcircular type stainless steeljalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge. |
| 81 | Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of theEngineer-In-Charge. |
| 82 | 15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM diaJaquar ALD--CHR-577. |
| 83 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of theEngineer-In-Charge. |
| 84 | 2000 litre capacity water storage tanksin 1st. floor. |
| 85 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. |
| 86 | 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) |
| 87 | 110mm U-PVCdoor Tee |
| 88 | 110mm U-PVC offset |
| 89 | 110mm U-PVCdoor bend |
| 90 | 110mm U-PVCplain shoe bend |
| 91 | 110mm U-PVCvent cowl |
| 92 | 110mm P-trap |
| 93 | 110mm U-PVCplain bend |
| 94 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of theEngineer-In-Charge. |
| 95 | 250mm to 375mm thick wall |
| 96 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Hindware/Jaquar/Parryware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. |
| 97 | 10 Liters capacity PVC cistern with 32mm dia flush bend.Hindware sleek fresh single flushStarwhite, Size 47.6 X 15.5 X 32.5 cm |
| 98 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) of Hindware/Jaquar/Parryware duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI "p" or "s" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of theEngineer-In-Charge. |
| 99 | Hindware Orissa Pan cat no 20004 Starwhite. Size- 53x41 cm |
| 100 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral "p" or "s" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of theEngineer-In-Charge. |
| 101 | EWC with "p" / S trap plain Hindware Cat No-20087 (S-10) Starwhite type, size-57x35x39 cm, seat cover for Hindware seat cover Premium starwhite. |
| 102 | Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of theEngineer-In-Charge. |
| 103 | Hindware ARIEL Wash Basin Size - 550mmx400x790mm, Cat.No. 10100 Starwhite & Hindware ARIEL Pedestal Cat -no- 11003 Starwhite. |
| 104 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. |
| 105 | Half stall urinal (Hindware)No.URS-WHT-13261 |
| 106 | 32mm dia CP dome waste |
| 107 | Cost of 15mm dia urinal spreader |
| 108 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge |
| 109 | Fixing of squatting urinal |
| 110 | Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)(Hindware)70002 |
| 111 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. |
| 112 | 600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion) |
| 113 | Supplying all materials, labour, T&P and fixing standard size glass-shelf of Hindware/Jaquar/Parryware with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification anddirection of the Engineer-in-charge. |
| 114 | Jaquar glass shelf ACN--CHR-1171 N 600mm long |
| 115 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail24"of Hindware/Jaquar/Parryware complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge |
| 116 | 25mmx600mm long CP towel rail (Jaguar make) ACN--CHR-1111NM. |
| 117 | Supplying all materials, labour, T&P and fixing standard sizedChromium Plated soap case ofHindware/Jaquar/Parryware complete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge |
| 118 | CP soap holder (Jaguar make) ACN--CHR-1131N. |
| 119 | Supplying all materials, labour, T&P and fixing standard sized Robe Hook ofHindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Jaquar Robe hook AGA-ANG-31791 |
| 120 | Supplying all materials, labour, T&P and fixing standard sized Soap Dispensor ofHindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Soap dispense with Glass Bottle. CAN--CHR-1135N. |
| 121 | Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge. |
| 122 | 250mmx250mm with RCC cover |
| 123 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxesetc. all complete as per aproved drawing , specification and direction of Engineer-in-charge. |
| 124 | Inside size 760mm x760mm x450mm |
| 125 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. |
| 126 | 110 mm dia U-PVC alround concrete |
| 127 | 160 mm dia U-PVC alround concrete |
| 128 | Supplying all materials, labour, T&P and constructing Man hole chamber of the following size withcement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksitepaymentof royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge. |
| 129 | Inside size 900mmx900mmx900mm |
| 130 | addl depth of 0.30m upto 4.50m depth |
| 131 | INTERNAL & EXTERNAL ELECTRICAL WORK. |
| 132 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels) (Make of modular box,cover,switch & socket-Legrand Myrios/schneider opale/panasonic vision.) |
| 133 | Group C |
| 134 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels)Average Length: 3mtr |
| 135 | Recessed wiring to ceiling fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels)Group B |
| 136 | Recessed wiring to Twin control light pointwith 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels)Group C |
| 137 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer-in-charge. |
| 138 | Recessed wiringfor 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex /Polycab/ Anchor / Havels)Group C |
| 139 | Recessed wiringfor2 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 140 | Recessed wiringfor 6 pin 16 amp socket outletwith 16Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For Aquaguard. |
| 141 | Recessed wiringfor A.C/ Power socket outletwithindustrial type socket outlet,plug top and metal chained cover in sheet steel enclosure,20A/32A SP MCBincluding all accesories and connection as per direction of Engineer-in-charge. |
| 142 | Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels)Group B |
| 143 | Call bell point |
| 144 | Recessed wiringfor3 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 145 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels) |
| 146 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels) |
| 147 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels) |
| 148 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels) |
| 149 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid tripposition for toggles for electrical fault conditions. |
| 150 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way SPN Distribution Boards For BDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-32ADPMCB (10KA)Outgoings-6 A SP MCB- 1 Nos,16A SP MCB 1Nos.(Make-L&T/ Schneider/Legrand) For 2nos Changing Room block. |
| 151 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 75 sq.mm direct in groundincluding excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable) |
| 152 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable) |
| 153 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of4 core 10 sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable) |
| 154 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 155 | 3.5C x 95 sq.mm |
| 156 | 3.5C x 75 sq.mm |
| 157 | 4C x 16 sq.mm |
| 158 | Supply, installation & testing of L.T. outdoor floor mounted type distribution boards made out of 2 mm thick CR sheet metal cubicle, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proved; having hinged door and compartmental arrangementfor eachequipment & busbar chamber onthe top of the panel running horizontally; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. |
| 159 | MAIN PANEL with 100A 4P MCCB 25KA -1 No as incomer,100 A 4P Change over switch-1Nos, 63 A 4P MCB 10KA -5Nos (For 3Nos Landscaping Light Feeder pillar & 2Nos Spare) with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB. |
| 160 | FEEDER PILLAR FOR LANDSCAPING AREAwith 63A 4P MCB (10KA) -1 No as incomer , 32A 4P MCB 10KA-5 Nos,32A DP MCB 10KA 3Nos as Outgoing with E.C Busbars . |
| 161 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. |
| 162 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
| 163 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required. |
| 164 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required. |
| 165 | Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-JAQUAR/philips/wipro/panasonic. |
| 166 | Ceiling mounted indoortypebatten typeLED Luminaire with LED Lamp Similar to JAQUAR Cat No. LGLZPCX022XWor equivalent. |
| 167 | Ceiling/ Wall mounted typeBULK HEADLuminaire withSimilar to JAQUAR Cat No.CWLL01V109XX or equivalent. |
| 168 | ROUND SURFACE mounted indoortype18W LED LIGHTSimilar to JAQUAR Cat No. LNRO02R018SCor equivalent. |
| 169 | Supply, Installation, testing and commissioning of 10W Mirror Light Similar to JAQUAR Cat no-LTBL01X010XC/Equivalent. |
| 170 | Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 171 | Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etcas required. |
| 172 | Supply, Installation, testing and commissioning of 40WIP65 Rating LED Street light similar to Jaquar cat no-LSRT01S36XW / Equivalent. WITH 3Mtr GI POLE etcas required. |
| 173 | Supply, Installation, testing and commissioning of 5W LED STEP Light similar to Jaquar cat no-LBRK01S105XW / Equivalent. etcas required. |
| 174 | Supply, Installation, testing and commissioning of 12W LED SPIKE Light similar to Jaquar cat no-LSPK04R112XW / Equivalent. etcas required. |
| 175 | Supplying and fixing ofof 50mm G.I pipe (Medium Class) along with accessories ingroundincluding cutting & making good the sameas required. |
| 176 | Silent DG. |
| 177 | Lighting Arrestors. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
