}

Tender For Cleaning Of Ug Reservoirs And Service Tank Including Renewal Replacement Of Gate Valve Sluice Valve And Its Associated Items At Various Jetties And Wharfs At Naval Dockyard Under Ge Nw Kunjali Colaba Mumbai, mumbai-Maharashtra

Military Engineer Services-MES has published Tender For Cleaning Of Ug Reservoirs And Service Tank Including Renewal Replacement Of Gate Valve Sluice Valve And Its Associated Items At Various Jetties And Wharfs At Naval Dockyard Under Ge Nw Kunjali Colaba Mumbai. Submission Date for this Tender is 04-01-2023. Gate Valves Tenders in mumbai Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

35063169
Corrigendum : Tender For Cleaning Of Ug Reservoirs And Service Tank Including Renewal Replacement Of Gate Valve Sluice Valve And Its Associated Items At Various Jetties And Wharfs At Naval Dockyard Under Ge Nw Kunjali Colaba Mumbai
Open Tender
Indian
Maharashtra
mumbai
04-01-2023

Tender Details

Cleaning Of Ug Reservoirs And Service Tank Including Renewal Replacement Of Gate Valve Sluice Valve And Its Associated Items At Various Jetties And Wharfs At Naval Dockyard Under Ge Nw Kunjali Colaba Mumbai

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Dec-2022 Corrigendum No 1 Other 28-12-2022
2 28-Dec-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 04-01-2023

Key Value

Document Fees
INR 1000 /-
EMD
INR 121000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :CLEANING OF U/G RESERVOIRS AND SERVICE TANK INCLUDING RENEWAL & REPLACEMENT OF GATE VALVE, SLUICE VALVE AND ITS ASSOCIATED ITEMS AT VARIOUS JETTIES AND WHARFS AT NAVAL DOCKYARD UNDER GE (NW) KUNJALI, COLABA, MUMBAI
Sl. No. Item Description
1Excavation in trenchesnot exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation/laying of pipe etc and getting out in hard dense soil complete all as specified and directed by Engineer-in-Charge.
2Returning fillingin including spreading, levelling, watering and well ramming in layers not exceeding 25 cm deep as in soil complete all as specified and directed by Engineer-in-Charge.
3Removing surplus excavated soil to a distance not exceeding 50 m and deposited where directed complete all as specified and directed by Engineer-in-Charge.
4Material and labour brick masonary valve chamber of size 0.90 mx 0.90 m x 0.90 m (internal size) and MS cover including earth work complete all as specified and directed by Engineer-in-Charge comprising of the following.
5150 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation complete all as specified and directed by Engineer-in-Charge.
6Brick work 230 mm thick built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
715 mm thick rendering in CM(1:4) internally and externally to exposed surface of brick work including150 mm below ground level complete all as specified and directed by Engineer-in-Charge.
8100 mm thick coping in PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.
9MS covers made out of 5 mm thick MS plate with double hinges, fixed MS angle iron frame made out of MS angle iron 40 x 40 x5 mm thick including 150 mm long hold fast made out of MS flat iron of size 25 x 4 mm embedded in PCC coping MS covers shall be provided with suitable hand grip and suitable locking arrangement complete all as specified and directed by Engineer-in-Charge.
10All MS surfaces shall ,be painted with two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed by Engineer-in-Charge.
11Allas per item No 4 above herein before but of size0. 60 m x 0 .60m x 0.60 m Internal size complete all as specified and directed by Engineer-in-Charge.
12Taking down old GI tubing 100/80 mm bore medium grade from trenches/wall/floor etc including making good the disturbed surfaces complete all as specified and directed by Engineer-in-Charge.
13All as per item No. 6 above 50/40 mm bore GI tubing
14All as per item No. 6 above 25 mm bore GI tubing
15Supply and fixGI tubes medium grade of 100 mm dia complete with all fittings (like; union, tee, bend, elbow, reducer, socket)to be fixed on wall and ceilings or laid in floors/trenches complete all as specified and directed by Engineer-in-Charge
16All as per item No. 9 above but of size 80 mm dia
17All as per item No. 9 above but of size 50 mm dia
18All as per item No. 9 above but of size 40 mm dia
19All as per item No. 9above but of size 25 mm dia
20Taking down unserviceable gun metal globe or gate valve of any sizefrom existing location complete all as specified and directed by Engineer-in-Charge.
21Supply and fixing gun metal gate valve, with iron wheel head screwed both ends for iron pipe of 80 mm bore incl provn of union nipples sockets etc complete all as specified and directed by Engineer-in-Charge.
22All as per item No.11 above but of 50 mm bore
23All as per item No.11 above but of 40 mm bore
24All as per item No 11 above but of 25 mm bore
25All as per item No 11 above but of 20 mm bore
26All as per item No 11 above but of15 mm bore
27Taking down old unserviceable float valve of any specification or any size complete all as specified and directed by Engineer-in-Charge.
28Supply and fix ball brass high pressure with polythene float and fly nut of 50 mm dia complete screwed to iron or brass ferrule complete all as specified and directed by Engineer-in-Charge.
29All as per item No. 18 above but of size 40 mm dia
30All as per item No. 18 above but of size 25 mm dia
31All as per item No. 18 above but of size 20 mm dia
32All as per item No. 18 above but of size 15 mm dia
33Taking down old unserviceable PVC tank and Supply and fix PVC moulded water storage tank of 2000 Ltrs capacity multilayered (ISI marked) cylindrical vertical type complete with inlet, outlet, overflow, and wash out connection, closed top cover complete including hoisting in position etc all as specified and directed by Engineer-in-Charge.
34All as per item No. 23.00above but capacity 5000 Ltrs
35All as per item No. 23.00 above but capacity 3000 Ltrs
36All as per item No. 23.00 above but capacity 10000 Ltrs
37Supply and fix in repair cast iron cover 450mm dia BMC approved including locking arrangements/net fixed on PVC water tank/RCC water tank as in repair suitable for up to 15000 gallons capacity complete all as directed by the Engineer-in-Charge .
38Supply and fixBrassfoot valve heavy duty 50 mm/65 mm dia brass with all accessories complete all as directed by the Engineer-in-Charge .
39All as per item No 28.00 above but 80 mmdia.
40All as per item No. 28.00above but 150 mmdia.
41Material and labour forcleaning of underground sump by bailing out the remaining water after pumping by arranging re-watering pumps ormanually and washing the walls & bottom surface by high pressure spray of approximately 195 PSI with rotary water jet pumps and removing thesludge and foreign matters complete and socking out the fixing with high pressure wet vacuumpumps scrubbing the wall and cleaning the entire sump including disinfectioning the tanks with spray of chemical approach by concerned authorities complete all as directed by the Engineer-in-Charge of following capacity :-
42Upto 800000 ltr capacity
43Upto 600000 ltr capacity
44Upto 400000 ltr capacity
45Upto 225000 ltr capacity
46Upto 100000 ltr capacity
47Upto 45000 ltrcapacity of open well upto 70 ft depth with 18ft dia
48All as per item No.31above but RCC overhead tanks on staging/terrace in any position of following capacity complete all as specified and directed by Engineer-in-Charge.
49Capacity upto 10000 ltr
50Capacity upto 5000 ltr
51Capacity upto 2500 ltr
52Cleaning of PVC tank in any position by rubbing, washing removing the scalesdust etc including plugging the inlets dusting washing complete all as specified and directed by Engineer-in-Charge for tanks
53Capacity from 500 TO 999 Ltrs
54Capacity from 1000 TO 1999Ltrs
55Capacityfrom 2000 TO 4999 Ltrs
56Capacity from 5000 TO 9999 Ltrs
57Capacity from 10000 Ltrs and above
58Supply & fix in repair hose Reel drum suitable for 30 mtrs X 20 mm dia rubber hose pipe complete all as specified and directed by Engineer-in-Charge.
59Supply & fix in repairsBranch pipe gun metal 63mm instantaneous inlet, made of threaded outlet, 15mm bore nozzle complete all as specified and directed by Engineer-in-Charge.
60Supply & fix in repair twin outlet hydrant valve 100mm having 65mm outlet with lock pin wheel complete all as specified and directed by Engineer-in-charge
61Supply & fix in repair single outlet hydrant valve 100mm having 65mm outlet with lock pin wheel complete all as specified and directed by Engineer-in-charge
62Supply & fix in repair gun metal Two way fire brigade inlet conection with adapter of size 80 mm dia X 63 mm dia complete all as specified and directed by Engineer-in-Charge.
63Supply and fix in replacement of MS cover made outof5 mm thick MS sheet with double hinges and suitable handle locking arrangement etc complete including two coats of synthetic enamel paint and one coat of primer allas complete and directed by Engr-in-Charge.
64Material and labour for painting toWATER SUPPLY/ FIRE SUPPLY LINEtubing any dia after prepawation of old painted surface by proper cleaning and then applying ONE COAT OF RED OXIDE PRIMER ANDtwo coat of synthetic enamelled paint as per existing colour code or as directed by Engineer-in-Charge
65Material and labour for painting of MS ladder of different height and size in various locations removingold painted surface by proper cleaning and scraping then applying ONE COAT OF RED OXIDE PRIMER ANDtwo coats of synthetic enamelled paint as per existing colour code or as directed by Engineer-in-Charge
66Material and labour for painting toWATER SUPPLY/ FIRE SUPPLY LINEcore points/ box/ pit chamberany dia after preparation of old painted surface by proper cleaning and then applying ONE COAT OF RED OXIDE PRIMER ANDtwo coat of synthetic enamelled paint as per existing colour code or as directed by Engineer-in-Charge
67Dismantling the damaged / unserviceable step ladder and design, fabricate supply fix / install step ladder made out of MS angle iron, solid iron/hollow rod/MS flats of suitable size with length as required as per site requirement and with the step gap of minimum 10 inch including welding , cutting, drilling etc matching grouting arrangement including making good to the disturbed surfaces and painting the step ladder with the two coats of synthetic enamelled paint over a coat of metal primer complete all as specified and directed by Engineer-in-Charge.
68Demolition of PCC/ inter locking tiles/ Road cutting for laying ofPipeand making good after laying the Pipe with PCC 1:2:4 to match the existing surface up to and including 15cm in depth and n.exc 0.6m width complete all as specified and directed by Engineer-in-Charge.
69Taking out old u/s Sluice valve with iron wheel head including all connected accessories of following sizes complete all as specified and directed by Engineer-in-Charge.
70150 mm
71100 mm
7280 mm
73Supply and fix NRV valve (ISI Marked ) with iron wheel head, screwed both ends for iron pipe for following sizes complete all as specified and directed by Engr-in-Charge
74150 mm
75100 mm
7680 mm
77Supply and fix in repair Direct-on-Line Starters 7.5 HP, 3-Ph motor complete all as specified and directed by Engineer-in-Charge.
78Supply and fix in repair Direct-on-Line Starters 10 HP, 3-Ph motorcomplete all as specified and directed by Engineer-in-Charge.
79Supply and fix in repair Fully automatic SD starter 15 HP, 3-Ph motor complete all as specified and directed by Engineer-in-Charge.
80Supply and fix in repair Fully automatic SD Starters 30 HP, 3-Ph motor complete all as specified and directed by Engineer-in-Charge.
81Supply and fix in repair Soft Starters 200 HP, 3-Ph motor complete all as specified and directed by Engineer-in-Charge.
82Supply and Fixing in repairsluice valves flanged end, cast iron body, flanged and drilled and non rising type brass spindlewith nut, long body, class P N 16, conforming to IS 14846 of 2000 for following sizesincluding all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed of and of following size complete all as specified and directed Engineer-in-Charge.
83300 mm bore
84250mm bore
85200 mm bore
86150 mm bore
87100 mm bore
8880 mm bore
8950 mm bore
90Supply, lay/fix, connect and testing MS ERW pipe, in any length, including supply and fixing all fittings, ISI marked conforming to IS-1239 and fixed to wall/ceiling or laid in trenches/floors complete all as specified and directed by Engineer-in-Charge.
91300 mm bore
92200 mm bore
93250 mm bore
94150 mm bore
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail