}

Tender For Repairs To Departmental Snow Machine No. 49 (Tata-715-Lpt) And Snow Cat 3 (Sonalika 90 Hp) Of Mechanical Field Sub Division Kulgam., kulgam-Jammu And Kashmir

Public Works Department-PWD has published Tender For Repairs To Departmental Snow Machine No. 49 (Tata-715-Lpt) And Snow Cat 3 (Sonalika 90 Hp) Of Mechanical Field Sub Division Kulgam.. Submission Date for this Tender is 12-12-2022. Vehicle Maintenance Service Tenders in kulgam Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

35018645
Corrigendum : Tender For Repairs To Departmental Snow Machine No. 49 (Tata-715-Lpt) And Snow Cat 3 (Sonalika 90 Hp) Of Mechanical Field Sub Division Kulgam.
Open Tender
Indian
Jammu And Kashmir
kulgam
12-12-2022

Tender Details

Repairs To Departmental Snow Machine No. 49 (Tata-715-Lpt) And Snow Cat 3 (Sonalika 90 Hp) Of Mechanical Field Sub Division Kulgam.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 08-Dec-2022 Corrigendum - Extension Date 12-12-2022

Key Value

Document Fees
INR 200 /-
EMD
INR 1086.0 /-
Tender Value
INR 54306.0 /-

BOQ Items

Name of Work: Repairs to Departmental Snow Machine No. 49 (Tata-715-LPT) and Snow Cat 3 (Sonalika 90 Hp) of Mechanical Field Sub Division Kulgam.
Sl. No. Item Description
1Repairs to Departmental Snow Machine No. 49 (Tata-715-LPT) and Snow Cat 3 (Sonalika 90 Hp) of Mechanical Field Sub Division Kulgam.
2Tata LPT 715 M/C 49 Dismantling of blade assy. from main frame by disconnecting the control panel from the supply , lifting of cabin, dismounting of front wheels from front axle, removing of mudguards. Reassembling the same to original position after completion of necessary succeeding jobs. All the tools and tackles required for the job are to be arranged by firm itself. The job includes cost of transportation of material and tools.
3Bracket for Holding the Blade Assembly for M/C 49 Providing, fabricating and fitting of bracket made out of MS plate of 12mm thickness by way ofcutting the plate into various pieces as per the following details by using gas welding torchas per required dimensions and then joining the same at required locations by way of Arc welding. 1. Main plate of bracket to be cut out of 40"x20" Qty= 5.56 sft Wt. @8.75kg/sft= 48.61 kg 2. Two(02) numbers side plates connected to front end of main frame of given sample. Qty of Steel= 2( 1/2x(21""+5"")x15"" + 5""x15"") = 540 sq in= 3.75 sft Wt. @8.75kg/sft = 32.81 kg 3. Two(02) trapazoidal brackets with one central hole as per sample to hold the secondary attachment with main bracket plate.Qty of steel required = (1/2 x (5""+3"")x5"")x 2= 40 sq in.= 0.27 sft Wt. @8.75kg/sft =2.43 kg 4. Two(02) Rectangular Strips to clamp the side plate with main frame by drilling holes of size as per sample at requisite positions. Qty=2x5"x15"= 150 sq inches = 1.04 sft Wt. @ 8.75kg/sft = 9.1 kg 5. Strengthening of Main Plate of Bracket at top and bottom side with strips. Qty: 2x40"x6" = 480 sq in = 3.33 sft Wt. @8.75kg/sft = 29.16 kg Total Weight = 122.11 kg The job includes cost on account oftransportation/tools/plants/gas/electrodes to be used for the execution of the job.
4Strengthening of Main Frame of Chassis of M/C 49: Providing, fabricating and fitting of various flat strips outof 8 mm thick MS Plate for both flanges and web of the main frame long members upto 80 inches from front end by way of cutting to of following details using gas torch and then joining by arc welding 1. Flanges-Top and Bottom onboth Rails: Qty 4x3"x80""=sq inches = 6.67 sft 2. Outer surface of the web of the main frame rails made as per the profile of the chassis frame.Qty = 2((5""x40""+1/2(5""+7"")x30""+7""x10""))=900 sq in = 6.25 sft Total Quanity of 8 mm thick plate = 12.92 sft Weight @5.83kg/sft = 75.32 kg The job includes cost on account of drilling of holes as per sample,transportation/ tools/plants/gas/electrodes to be used for the execution of the job
5Guarding mesh at rear end of M/C 49. Providing , fabricating and fitting of Rear Guarding Mesh out of 6mm MS angle of leg lengths (35mm x 35mm) of 16" linear lengthand MS square bar of 8mmx8mm of 40" linear length by cutting into various pieces of following details using gas torch and then joining at rear extreme end of the trolley to form a rectangular gaurding frame by way of Arc welding. 1. Two MS angles to be joined at lower side of trolley parallel towidth of trolley at rear end. Qty : 2x7"=14" 2. Two MS angles to be joined at two rear ends of trolley vertically downwards. Qty: 2x 1"= 2" Total linear length of the angle = 16" Total wt of the angle @ 0.914 kg/ft = 14.6 kg 3.Seven(07) number 7" long horizontal pieces and five(05) number 1" long cross pieces. Total Qty of MS bar = 5x7" +5x1" =40". Total wt of square bar @0.153 kg/ft = 6.12 kgTotal wt of the metal = 20.72 kg The job includes cost on account of transportation/tools/plants/gas/electrodes to be used for the execution of the job.
6Denting of roof pipes/Tailboard of M/C 49 The job includes denting of tailbord to its orinigal shape. It also includes denting of roof pipes and joining them into proper frame. Fixing of climbing step on driver"s side into original shape. The job includes cost on account of transportation/ tools/plants/gas/electrodes to be used for the execution of the job.
7Reinforcing of tailboard of M/C 49. The jobincludes reinforcing of tailboard by way of Arc welding out of MS flate sheet 5mm thick of cross section(50mm x 5mm) of 16' length along the periphery of the tailboard by way of Arc welding. Qty of MS sheet linear length= 16"Total wt of MS sheet @0.597 kg/ft = 9.55 kg. The job includes cost on account oftransportation/ tools/plants/gas/electrodes to be used for the execution of the job.
8Side Guarding Mesh for air tanks of M/C 73. Providing ,frabricating and fitting of Guarding Mesh out of 6mm thick MS angle of leg lengths 35mmx35mm of 7" linear length into various pieces of following details by way of cutting using gas torch and joining to trolley lower left side at requisite position by way of arc welding. 1. Two MS angle of 2.5" forming horizontal parallel sides.Qty = 2x 2.5"= 5" 2. Two MS angles of 1" each, forming other two parallel sides. Qty = 2x1= 2" Total Qty = 7" of linear length. Total wt of MS angle @ 0.914 kg/ft=6.398 kg. 3.Providing ,fabricating and fitting out of MS square bars of cross section 8mm x 8mmby way of cutting using gas torch and joining to the MS angle frame to form mesh by way of arc welding.Qty of MS bar = 10x1" = 10" linear length. Total wt of MS bar @ 0.153 kg/ft = 1.53 kg The job includes cost on account oftransportation/ tools/plants/gas/electrodes to be used for the execution of the job.
9Galvanised steel Bolts M 123?
10Snow Cat 3rd(Sonalika 90HP) Dismantling of blade assy. from main frame by detaching of hydraulic pipes and reassembling to original position after completion of necessary succeeding jobs. All tools, tackles, fixtures and other material handling equipments are to be arranged by the firm. The job includes cost of transportation of material and tools.
11Foundation plate to support Hydraulic jack of Cat 3rd. Providing, fabricating and fitting of MS sheet out of 2"x2" of 8mm thickness along with foundation arm attachment in " H " shapefabricated out of 5mm MS channel 100mm x 50mm of linear length 18' by cutting into various pieces of following details using gas torch and then joining the same by Arc welding. 1.Foundation MS lower plate cut out of 2"x2" of 8mm Qty of MS plate = 4 sft Total wt of plate @ 5.83 kg/sft = 23.32 kg 2. MS channel of four(04) No"s joining them in pairs to form rectangular tubes then connecting the tubes by three cross channels to give "H" shape. Qty of MS channel = 18" linear length. Total Wt of channel @2.91 kg/ft = 52.46 kg. The job includes cost on account of transportation/ tools/plants/gas/electrodes to be used for the execution of the job.
12Reinforcing of blade by patch welding of Snow Cat 3rd. Providing ,fabricating and fitting of MS plate out of 2"x4" of 5mm thickness by way ofcutting using gas torch and joining it to both wings of blade . It also includes fabricating and fitting of four(04) number MS strip 2""x7" out of 5mm thick MS sheet by way of gas cutting and joining at cracked locations along borders of the blade by way of Arc welding. 1. MS sheets of two number out of 5mm thick sheet. Qty of MS sheet =2x2"x4" = 16sft 2. Four(04) number MS stripsout of 5mm thick sheet. Qty of MS strip= 4x2""x84""=672 sq.in =4.66 sft Total Qty of MS 5mm PLate = 20.66 sft Total wt of MS 5mm Sheet @ 3.64 kg/sft =75.20 kg. The job includes cost on account oftransportation/tools/plants/gas/electrodes to be used for the execution of the job.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail