}

Tender For Augmentation Of Existing 11 Kv 3X185mmsq.Cable Of 11 Kv Mauli Complex Feeder And 11 Kv Mauli Feeder Emanating From 66 Kv Grid S/Stn. Manimajra Under Electy.Op. S/Divn.No.8, Manimajra, Chandigarh., Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Tender For Augmentation Of Existing 11 Kv 3X185mmsq.Cable Of 11 Kv Mauli Complex Feeder And 11 Kv Mauli Feeder Emanating From 66 Kv Grid S/Stn. Manimajra Under Electy.Op. S/Divn.No.8, Manimajra, Chandigarh.. Submission Date for this Tender is 05-12-2022. Feeder Pillar Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

35014716
Tender For Augmentation Of Existing 11 Kv 3X185mmsq.Cable Of 11 Kv Mauli Complex Feeder And 11 Kv Mauli Feeder Emanating From 66 Kv Grid S/Stn. Manimajra Under Electy.Op. S/Divn.No.8, Manimajra, Chandigarh.
Open Tender
Indian
Chandigarh
Chandigarh
05-12-2022

Tender Details

Augmentation Of Existing 11 Kv 3X185mmsq.Cable Of 11 Kv Mauli Complex Feeder And 11 Kv Mauli Feeder Emanating From 66 Kv Grid S / Stn. Manimajra Under Electy.Op. S / Divn.No.8, Manimajra, Chandigarh.

Key Value

Document Fees
Refer document
EMD
INR 1480.0 /-
Tender Value
INR 71585.0 /-

BOQ Items

Name of Work:Augmentation of existing 11 KV 3x185 mm.sq. cable of 11 KV Mauli Complex feeder and 11 KV Mauli feeder emanating from 66 KV Grid S/Stn. M.Majra,under Electy. OP. S/Divn.No.8, Manimajara, Chandigarh.
Sl. No. Item Description
1Laying of 11 KV 3X300mm2 XLPE cable in below ground level under road with trenchless technique through HDPE pipe 6 kg pressure PE 80 material having outer dia 110mm as per standard design/ specifications of the Electricity Department complete in all respect as required at site. Note:-The HT cable shall be provided by department.
2Laying, testing and commissioning of11 KV 3X300mm2 XLPE cable in kachha path and Paver Block in ground after digging trench 90 cm below ground level including excavation of trench and cushioning covering with sand and supply and placing 2nd class burnt bricks on each and either side of cable and flat on top of the cable and refilling and ramming the trench in original position. Note:-The HT cable shall be provided by department.
3( 11 KV Mauli Complex feeder ) Laying, testing and commissioning of11 KV 3X300mm2 XLPE cable In trench at yard 66 KV and 66 KV S/Stn. (13+64)
4Laying, testing and commissioning of11 KV 3X300mm2 XLPE cable through GI pipe along the pole specifications of the Electricity Department complete in all respect as required at site. Note:-The HT cable shall be provided by department.
5( 11 KV Mauli feeder ) Laying, testing and commissioning of11 KV 3X300mm2 XLPE cable In trench at yard 66 KV and 66 KV S/Stn. (21+64)
6Laying, testing and commissioning of11 KV 3X300mm2 XLPE cable through GI pipe along the pole specifications of the Electricity Department complete in all respect as required at site. Note:-The HT cable shall be provided by department.
7S/E of GI pipe (medium class) 4” dia having outer dia. Of 114.30mm2 and thickness of pipe should be 4.50mm.The approx. weight of pipe should be 12.10 kg./meter with dimensional as per IS:1239:1979 and having visual coating hot dip zinc galvanizedfixed with the help of 2 nos. MS clamps made from 50x6mm MS flat. Note:- The G.I pie should be of Jindal, TATA , Hissar make.
8Supply and erection of 9 KV, 5 KA Static class heavy rating, gap less, metal (zinc) oxide Lightening Arrestor Set for H Pole structure complete along with MS-clamps, complete fitting and accessories for O/D installation, conforming to IS:2629, 2633, 5621, 3070 (Part-III), duly supported with MS flat 50x6mm clamps with required size of nuts and bolts etc. The lightening arrestor shall be earthed properly with existing earth wire 7/10 SWG job complete in all respect. Technical specifications attached at Page no.____________ of DNIT.
9S/E of the I/D Type heat shrinkable end joints including making connections for 11 KV 3X300mm2 XLPE cable. The joints shall be of Denson, Raychem,3M Make only.
10S/E of the O/D Type heat shrinkable end joints including making connections for 11 KV 3X300mm2 XLPE cable .The joints shall be of Denson,Raychem,3M Make only.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail