Military Engineer Services-MES has published Tender For Certain Revenue Works, Minor Works And Special Repair For 12 Toilets Under Zone I Area And E/M Sub Div At Jaipur Mil Stn. Submission Date for this Tender is 24-12-2022. Toilet Bathroom Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Dec-2022 | Amendment | Other | 17-12-2022 |
2 | 17-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-12-2022 |
Sl. No. | Item Description |
1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed |
2 | Surface excavation n.exc 30 cm and everaging 15cm in soft/loose soil and getting out including clearing of bushes herbs etc. complete all as directed |
3 | Excavation in trenches, n. exc 1.50 m wide and n. exc 10 Sqm on plan and n. exc 1.50 depth and getting out in soft / loose soil complete all as directed |
4 | Excavating over areas, n. exc.1.5 m deep and getting out complete all as directed |
5 | Removing excavated soil exceeding 250 mtr but n. exc 500 mtr and depositing where directed complete all as specified. |
6 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed |
7 | M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
8 | S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed |
9 | M&L for prearation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
10 | M& L for Hardcore of broken stone or boulders gauge n exc. 63 mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
11 | M & L for plainCement Concrete 1:4:8 type D-2 (40mm graded aggregate) in sub base of floors, foundation filling etc complete all as specified and directed |
12 | M & L for providing precast cement concrete blocks or slabs 1:2:4 mixtype B-0 (using 12.50 mm graded stone aggregate) with plain or interlocking joints as directed complete in walls setting in CM 1:4 complete with joints to match complete all as specified and directed |
13 | M & L for Machine pressed precast concrete rubber mouldedinterlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over and incl 25mm thick sand cushion layer complete all as specified and directed |
14 | S&F HDPE speed breaker made from heavy duty tough polyethylene with high resistance wear & tear property. Best suitable height of 2” (50mm) for speed restriction, UV stabilized colours in black & Yellow combination. High reflective mark showing arrows in white colour are marked on both sides of yellow and black bumps. The two bumps Yellow & Black are both having end caps of contrast with two holes . The size of breaker is 375mm x50mm x500mm with four holes. The whole breaker is fixed with and including epoxy hardener and bolts complete all as specified and directed. |
15 | Demolition of reinforced cement concrete in steps and similar suspended works complete all as specified and directed |
16 | Demolition of PCC in ground floors and pavings n exc 15 cm thickness( below ground level) complete all as specified and directed |
17 | Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed |
18 | Taking down cement plaster on brick/stone wall, ceiling etc incl raking outs joints hacking for key scrubbing with water complete all as specified and directed |
19 | Taking down door chowkaht or frame of any description area n exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed |
20 | Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4.00 Sqm each without taking off shutters from the frame complete all as specified and directed |
21 | Taking down Shutters of any description n exc 2.00 Sqm complete all as specified and directed |
22 | M&L for brick work with sub-class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
23 | M & L for Brick work with sub-class `B" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed |
24 | Supply and fixing anodised aluminium window and ventilator shutters, side hung typewithout sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubberpacking, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No)suitable handle 1 No complete all as specified and directed |
25 | S & F Stainless steelwire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed |
26 | S & F 5.5mm thick plain sheet glass ordinary quality to aluminium door/windowin sqaures not exc 0.5 sqm in each pane complete all as specified and directed |
27 | S&F 30mm thick flush door shutter silid construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed |
28 | M&L for preparing new painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed. |
29 | S&F solid PVC door frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed |
30 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails, MS frame shall be covered with heat moulded lain colour PVC Ç"channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per secification & drawing. |
31 | S&F stainless steel Butt hinges, medium weight and fixed 100 mm complete all as specified and directed |
32 | S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed |
33 | S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed |
34 | M&L for rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work (Internal Surface) including finished even and smooth without using extra cement complete all as specified and directed |
35 | M&L for rendering 10 mm thick cement plasterin CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed |
36 | M&L for preparation of newly plastered surface wall andapplying two coats of distemper oil emulsion of any tint over a coat of primer completeall as specified and directed. |
37 | M & L for preparing new plastered surfacesand applying two coats of cement base paint on wall over a coat of alkali resistant primer complete all as specified and directed |
38 | M&L for preparation of newly plastered surface on ceiling andapplying two coats of distemper oil emulsion of any tint over a coat of primer completeall as specified and directed. |
39 | M&L for preparing old surface of ceiling and applying two coat of distemper (Oil emulsion) of approved tint all as directed. |
40 | M&L for preparing old surface wall and applying two coat of distemper (Oil emulsion) of approved tint complete all as specified and directed |
41 | S&F in repair GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed |
42 | S&F in repair GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floorincl taking up or down existing steel tubing complete all as specified and directed |
43 | S&F in repair GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floorincl taking up or down existing steel tubing complete all as specified and directed |
44 | S&F as in repair15 mm bore bib cock, two way, cast copper alloy chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as directed. |
45 | S & F in repairs 15mm bore Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed down for iron pipe and fixed complete all as specified and directed |
46 | S&F as in repair cromium plated brass hand shower (health faucet) with 8mm dia 1.00m long flexible tube and wall hook complete all as directed. |
47 | S&F in repair Toilet paper roll holder with flap Vitreous china with CP brass screw complete all as specified and directed |
48 | S&F in repair soap dish, vitreous china white, approx size 160x160x90 mm complete all as specified and directed |
49 | S & F in repairvitreous china washbasin, white flat back size 550 x 400 mm excludingtaps, waste chain and plug andporcelain stopper but including brackets, CP coupling , PVC waste pipe complete all as specified and directed |
50 | S&F as in repair bottle trapof PTMT 32mm bore with 300mm long wall connection pipes with minimum weight 32 mm- 260 gms complete all as specified and directed |
51 | S & F in repair 15 mm bore Pillar cock with swan neck spout and aerator complete all as specified and directed. |
52 | S&F in repairvitreous china Pedestal pattern EWC S trap white bowl size 655mm x370mm x730 mm including cistern complete all as specified and directed. |
53 | S&F in repair vitreous China urinals, half stall long body type (back or corner wall type) of size 375mm x390mm x590mmcomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed |
54 | S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed complete all as specified and directed |
55 | S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed complete all as specified and directed |
56 | S&F in repair angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore complete all as specified and directed |
57 | S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed |
58 | Dismantling ofPVC/ AC and cast irondrain pipes 75mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed |
59 | S&F PVC (SWR) pipe single socketed, any in length with rubber ring joints laid in trenches or in floors type "B" ISI marked of 75mm bore complete all as specified and directed |
60 | S&F PVC (SWR) pipe single socketed, any in length with rubber ring joints laid in trenches or in floors type "B" ISI marked of 110mm bore complete all as specified and directed |
61 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, type type "B" ISI marked of 75mm bore complete all as specified and directed |
62 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, type type "B" ISI marked of 110mm bore complete all as specified and directed |
63 | M&L concrete bed to dain pipes 75 mm to 100mm dia cement concrete 1:3:6, type C-2 including packing under, and haunching against the sides of pipes after they are laid and tested in all as specified |
64 | S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed |
65 | S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed |
66 | S&F PVC (SWR) junction single (single T) equal or unequal 75mm complete all as specified and directed |
67 | S&F PVC (SWR) junction single (single T) equal or unequal 110mm complete all as specified and directed |
68 | S&F PVC (SWR) vent cowl 75mm complete all as specified and directed |
69 | S&F PVC (SWR) vent cowl 110mm complete all as specified and directed |
70 | M & L for PVC (SWR) floor trap, plain with grating incl jointing with solvent cementcomplete all as specified and directed |
71 | S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old existing tank complete all as specified in SSR Part I,complete all as specified and directed |
72 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified and directed |
73 | S&F Looking mirror 5mm thick bevelled edge , size 1.50M x 0.60M fitted with screws including making holes in mirror, fixing arrangement complete all as specified and directed |
74 | Dismentaling of floor hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed |
75 | M&L 25 mm Thick PCC 1:2:4 type B0 (using 12.5mm graded aggregate)under floor tiles complete all as specified and directed |
76 | M&L Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
77 | M & L glazed coloured joint free ceramic tiles 300mm x600mm x7 to 8 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat on surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed |
78 | M&L precast reinforced cement concrete (Nominal mix) 1:2:4 type B-1 using 20mm graded stone agg for manhole cover slab set in cement mortar 1:6 incl necessary form work. Note :- Reinforcement shall be paid for separately complete all as specified and directed |
79 | M&L reinforcement cement concrete (Nominal mix) type A1, 1:1.5:3 (20mm graded aggregate) as in slab support on walls, landing, balconies, deck slabs and in shelves and the like all as specified (demolition to be taken) complete all as specified and directed |
80 | M&L reinforced cement concrete (nominal mix) (M-25)using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, bases for coloumn, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
81 | M&L reinforced cement concrete (Nominal mix) (M-25) using 20mm graded stone aggregate as in cols,pillars,pier posts etc complete all as specified and directed |
82 | M&L forFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed |
83 | M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide for rough finished surfaces all as specified and directed. |
84 | M&L for Formwork to sides of concrete foundations,footings, base of columns, raft and raft beams, side and soffits of foundations,plinth beams and similar work vertical or to batter. |
85 | M&L for Formwork to side of pillars, posts struts, piers, columns and stanchions complete all as specified and directed |
86 | M&L for Granite (of any tpe), 16 to 18mm mm work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed |
87 | M&L moulding to granite stone 16 to 18 mm thick, rounding edges including polishing complete all as specified and directed |
88 | M&Lcement concrete 1:4:8 type D2, 75 mm thick as in flooring all complete all as specified and directed |
89 | M&L for 40 mm thick cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and directed |
90 | M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping of drain and the like including necessary form work weathering rounded or chamfered angles, throating including finishing the surface even and smooth without using extra cement complete all as specified and directed |
91 | M&L for 15 mm rendering in two layers with 10 mm withCM 1:6 & 5 mm thick with CM (1:4) with using water proffing compoundon fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
92 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
93 | All as per item No 92 but 5mm dia and over upto and including 10mm dia in strirrups complete all as specified and directed |
94 | S&F mild steel work such as Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, barricades etc including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed. |
95 | S & F Plates (plain or chequered) channels, square cut or notched(ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed |
96 | S&F framed work as in door or gate of angle or other section with gusset plates, rail, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting also fastening and fixing complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed |
97 | S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming to IS 1161-1979 graded St-240 complete all as specified and directed |
98 | M&L formild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and as directed conforming to Fe-410 W complete all as specified and directed |
99 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
100 | M&L for Point wiring complete as specified with 1100 volt grade 1.5sqmm (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC concealed conduit of suitable size but not less than 20mm dia, with all fittings, concealed in wall/roof /floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wallduly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :- One light/fan/ Exhaust fan point controlled by one switch 6 Amps 1 way. |
101 | All as per Item 100 above but socket outlet 6 amp controlled by one switch on the same board with other switches. |
102 | All as per item No. 100 above but point wiring with 4 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket outlet controlled by one switch. |
103 | S & F Modular switch 6 Amp one way 230 V AC 1 module complete all as specified & directed. |
104 | S & F Modular switch 16 Amp one way 230 V AC 1 module complete all as specified & directed. |
105 | S & F Socket Socket, 6A - 2/3 pin combined 2 module, multi socket for all pins 230 V AC complete all as specified & directed. |
106 | S & F Socket 6A/16A - 2/3 pin combined 2 module multi socket for all pins 230 V AC complete all as specified & directed. |
107 | S&F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified & directed. |
108 | S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways. |
109 | S&F in repair MCBs of "C" seriessingle pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. |
110 | S&F in repair MCBs of "C" series double pole 40 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. |
111 | S&F LED light fittings 2 feet long, 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
112 | S&F LED light fittings 2 feet long, 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
113 | M&L for submain wiring with two runs of single core PVC insulated and unsheathed, multistranded FRLScopper conductor of size 6.00 sqmm, LT cable, 1100 volts grade and one run of 6 sqmm single core, multistrand copper conductor (green) as earth continuity conductor drawn into and including 20 mm dia concealed conduit complete all as specified and directed. NOTE: Two runs of 6 sqmm cable, one run of 6 sqmm cable along with conduit including acessories shall be measured as one running metre of submain wiring. |
114 | Taking down MCB distribution boards with incoming and outgoing controls any make any capacity after disconnecting complete. |
115 | Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete. |
116 | S&F exhaust fan made of stell body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed. |
117 | M&L for galvanised mildsteel tubes 20 mm bore "medium grade "(ISI marked)with all fitting( ISI marked) of following size and fixed complete to walls and ceilings or laid in floors/trenches and under road, complete all as specified and directed. |
118 | All as per item No. 117 above but 25mm bore pipe. |
119 | All as per item No. 117 above but 50mm bore pipe. |
120 | All as per item No. 117 above but 80mm bore pipe. |
121 | S & Fgun metal gate valve/forged valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class-1, IS-778 marked of following sizes including taking down old unsv :- 20mm bore |
122 | All as per item No. 121 above but 25mm bore pipe. |
123 | All as per item No. 121 above but 50mm bore pipe. |
124 | M&L for CI sluice valve supply, fixing, testing & commissioning cast ironsluice valves,class PN 1.0 ofsize 80 mm bore cast iron bodywith forged steel spindle, non rising type and cast iron wheel head, both ends flanged, IS-14846 markedwith neoprene rubber gasket, jointing material includingnuts/bolts/washer of suitable size etc complete all as specified and directed. |
125 | Cutting existing CI/GI pipe line of size 200 mm bore and insertion of new tee of suitable size and one collar of size 100/80 mm dia complete with run lead joint and earth work all as specified and directed. |
126 | M&L for Construction to brick masonary valve pit/ chamber of size900x900x900 mmand including necessary excavation and earth work, PCC, Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x6mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and including provn of 40mm dia Godrej (freedom) lock complete all as specified and directed :- |
127 | M&L for point wiring with 1100 volts grade PVC insulated unsheathed FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) PVC insulated unsheathed multistranded, copper conductor, FRLSdrawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets , fan regulator as required for one fan point cntrolled by one switch complete all as directed. |
128 | Supply and fix exhaust fan of 300mm sweep, single phase, heavy duty, metal body 1400rpm and connecting up including provn of cable from ceiling rose to fan, including making suitable hole for foxing and make good disturbed surface to match with existing surface and fix mosquito net with wooden frame of opening size of fan in outer part of building complete all as directed. |
129 | S&F switch piano flush button single pole one way 6 Amp complete. |
130 | M&L for cutting wall opening for fitting/ inserting 300mm size exhaust fan in wall at suitable hight including repair the wall and opening with cement mortor in 1:4 and paint the wall to match the existing wall surface complete all as directed. |
131 | Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail