}

Tender For Special Repair Of Khanchandpur Biwain Road In Km. 1 To 8(460), kanpur-Uttar Pradesh

Public Works Department-PWD has published Tender For Special Repair Of Khanchandpur Biwain Road In Km. 1 To 8(460). Submission Date for this Tender is 07-12-2022. Road Work Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

34997647
Corrigendum : Tender For Special Repair Of Khanchandpur Biwain Road In Km. 1 To 8(460)
Open Tender
Indian
Uttar Pradesh
kanpur
07-12-2022

Tender Details

Special Repair Of Khanchandpur Biwain Road In Km. 1 To 8(460)

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 29-Nov-2022 Date extension Date 07-12-2022

Key Value

Document Fees
INR 2950 /-
EMD
INR 699000.0 /-
Tender Value
INR 99.70 Lakhs /-

BOQ Items

Name of Work: Special Repair of Khanchandpur Biwain Road in Km. 1 to 8(460)
Sl. No. Item Description
1Providing, laying, spreading and compacting stone aggregates of specific sizes(53mm to 22.4mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 404.
2Providing and applying tack coat with Bitumen (VG-10)using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces & cleaned with Hydraulic broom as per Technical Specification Clause 503 including cost of bitumen.
3Providing, laying and rolling of open-graded Premix surface of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscocity grade bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable Hot Mix plant, laying and finishing with paver finisher and compaction with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Seal Coat "Type-C" as per MORTH Technical Specification Clause 510 including cost of bitumen.
4Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including cost of bitumen.
5Construction of subgrade and Earthern shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300-2 with a lead upto 1000 m as per Technical specification clause 305.
6Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per Technical specification clause 602.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail