Public Works Department-PWD has published Tender For Special Repair Of Mughal Road To Nagina Bamhrauli Road In Km. 1 To 7. Submission Date for this Tender is 07-12-2022. Road Work Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 29-Nov-2022 | Date extension | Date | 07-12-2022 |
Sl. No. | Item Description |
1 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. |
2 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. |
3 | Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granuller base including cleaning of road surface and spraying primer @ 0.70 Kg/Sqm. using mechanical means as per technical specification clause 502 including cost of emulsion. |
4 | Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the granular surface cleaned with mechanical broom as per technical specification clause 503 including cost of bitumen. |
5 | Providing, laying and rolling of open-graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in Hot Mix plant, laying and finishing with paver finisher and compaction with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Seal Coat "Type-C" as per MORD Technical Specification Clause 508 including cost of bitumen. |
6 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using "Type-C" as per Technical Specification Clause 510 including cost of bitumen. |
7 | Construction of subgrade and Earthern shoulders with approved material obtained from borrow pits with a lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300-2 with a lead upto 1000 m as per Technical specification clause 303.1. |
8 | Supply and fixing of 600 mm dia NP-3 hume pipe as per direction of E/I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail