Military Engineer Services-MES has published Certain Special Repair And Mw Work In The Area Of Age B / R ( East ) Under Ge ( N ) Pune Ge ( N ) P / Token - 61 Of 2022-2023 Certain Special Repair And Mw Work In The Area Of Age B / R ( East ) Under Ge ( N ) Pune. Submission Date for this Tender is 14-12-2022. Building Work Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 2 | S&F for rolled mild steel frame work as in grills, doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc confirming Fe 410-W(Gde-E-250) quality B complete all as specified and as directed |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for soft/loose soil complete all as specified and as directed |
| 4 | M&L for PCC 1:4:8, type D-2(40mm graded crushed stone agg) as in foundations,filling and mass concrete, sub base complete all as specified and as directed |
| 5 | S&F in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and as directed |
| 6 | Dismantling of asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed |
| 7 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed |
| 8 | -ditto- all as per item No 7, here in before but plain sheet on roof ridge complete all as specified and as directed |
| 9 | Taking up or down 15mm bore steel tubing and connections, incl cleaning for refixing or removal to store complete all as specified and as directed |
| 10 | -Ditto- all as per item No 09 here in before but 20mm dia of bore complete all as specified and as directed |
| 11 | S&F for 15mm dia of bore GI steel tubing medium grade with all fittings laid in walls and ceilings or in floors complete all as specified and as directed |
| 12 | -Ditto- all as per item No 11 here in before but 20m dia of bore complete all as specified and as directed |
| 13 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.and cutting chases for concealed water tubing or concealed conduit wiring,etc and making good, cutting not exc 10 cm girth complete all as specified and as directed |
| 14 | M&L for refixing 15mm bore old steel tubing and connections in new or old position (walls, ceiling,floors, etc.) complete all as specified and as directed |
| 15 | -Ditto- all as per item No 14 here in before but 20m dia of bore |
| 16 | S&F in repair 15mm dia Bib taps chromium plated with flange screwed for pipe and fixed on iron pipe complete all as specified and as directed Make: Jaguar/ Zim/Jhonson new series or equvalent |
| 17 | S&F in repair 15mm dia angle cock chromium plated with flange screwed for pipe and fixed on iron pipe complete all as directed Make: Jaguar/ Zim/Jhonson new series or equvalent |
| 18 | S&F in repair 15mm dia two way angle cock chromium plated with flange screwed for pipe and fixed on iron pipe complete all as directed Make: Jaguar/ Zim/Jhonson new series or equvalent |
| 19 | S&F in repair 15mm dia chromium plated fancy type swan neck pillar tap with extension body with fly nuts capstan head screwed down high pressure with or without lettered Hot or Cold with long screwed shank fixed with wall flange and fixed on iron pipe complete all as directed Make: Jaguar cat Pt No VGP-81021N or equvalent |
| 20 | S&F in repair CP Soap Dish fixed with screws on walls complete all as specified and as directed Make:Jaguar or equivalent |
| 21 | S&F in repair vitreous china wash down water closet pan(pedestal pattern) EWC white or coloured incl trap connection to drain (outgoing pipe) and flushing pipe, PVC jet for pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed patteren with flat bottom and cover and MS chromium plated or aluminised hinging device etc complete all as specified and as directed. Make:Cera/Prayag/ Jhonson Pedder |
| 22 | S&F in repair vitreous china wash down water closet pan(Orissa pattern) white or coloured incl trap connection to drain (outgoing pipe) and flushing pipe, including 450/600mm long PVC connection,complete all as specified and as directed. Make:Cera/Prayag/ Jhonson Pedder |
| 23 | S&F in repair vitreous china wash hand basin white or coloured of bowl size 550x440mm incl waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15mm dia bore to be fixed with and incl MS brackets complete all as specified and as directed Make:Cera/Prayag/Jhonson Pedder |
| 24 | S&F in 600x450mm bevelled edge mirror of selected quality glass moulded on 6mm thick AC board or commercial plywood & fixed to wooden plugs with chromium plated brass screw. |
| 25 | S&F in repair 10Ltrs capacity PVC valveless syphonic action typeflushing cistern low level, white or coloured with inlet, ball valve, float and handle incl brackets and PVC flushing pipe of polythylene of low or high density or 32mm dia complete all as specified and as directed Make: Cera/Prayag/ Jhonson Pedder. |
| 26 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges stainles steelfixed on walls complete all as directed |
| 27 | S&F in repair chromium plated gratings 100mm dia with drain hole complete all as specified and as directed Make: ISI Marked or of equivalent make as per Appx"A" as approved by GE |
| 28 | S&F rotational moulded polyethene water storage tank 3 layer white colour water tank non toxic effect, algea formation protection (made from virgin grade of polythethylene material which is duly stablized with anti-oxidant plastic) of capacity 1000 Litres (cylinderical verticle one piece moulded with closed top) the internal and external surfaces of tank are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S&F necessary GI fittings, inlet/ outlet washout, overflow pieces long nipples, checknuts, washers & 20mm dia PTMT valves high pressure of PTMT epoxy coated aluminum rod&high density plastic ball and 20mm brass stop cock etc complete including dismantling of existing water tank complete all as specified and as directed. Make:Sintex, Polycon, Rotex |
| 29 | S&F in repair20mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Min weight 15mm-142gms / 20 m m - 2 1 0 g m s / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed Make: Prayag/Polytuf |
| 30 | S&F in repair 32mm bore waste fittings, brass,chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixedcomplete all as specified and as directed by Engr-in-Charge |
| 31 | S&F in 32mm dia of High density polyethylene (HDPE) waste pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed Make:Prayag/Polytuf |
| 32 | S&F in 15mm dia of bore PVC connection fixed with iron pipe with PTMT nuts in 450mm long complete all as specified and as directed Make:Prayag/Polytuf |
| 33 | S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall incl GI clamp with screw complete all as specified and as directed.Make:ISI marked |
| 34 | -Ditto- all as per item No 33 here in before but 75mm dia fixed on wall complete all as specified and as directed |
| 35 | S&F in repair 110mm dia PVC (SWR) bends in any radius fixed with pipe complete all as specified and as directed.Make:ISI marked |
| 36 | -Ditto- all as per item No 35 here in before but 75mm dia fixed on wall complete all as specified and as directed |
| 37 | Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and asdirected by Engr-in-Charge. |
| 38 | M&L for 15mm thick plastering in two layers of CM 1:6 on brick or concrete wall surfaces etc with 3% of WPC on cementcomplete all as specified and as directed.(Note:WPC shall be measurned and paid in separatetly) |
| 39 | -Ditto- all as per item No 38,here in before but 15mm thick plaster in CM 1:4 on wall surfaces complete all as specified and as directed |
| 40 | Supply only integral water proofing compound complete all as specified and as directed |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge |
| 42 | M&L for Machine cut mirror polished kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete, in floors etc complete all as specified and as directed |
| 43 | Ditto- all as per item No 42, here in before but wall surfaces for skirting/ dado of the wall surfaces match with floor tiles over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed |
| 44 | M&L for cutting & mirror polishing on existing marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed |
| 45 | M&L for non skid ceramic joint free tiles 7-8mm thick (square/rectangular) polished, area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floors over 20mm thick screed bed or bedding of layer in CM 1:6 complete all as specified and as directed |
| 46 | M&L for glazed ceramic tiles in vertical surfaces 300x450x7-8mm thickcement slurry and pointed in white or coloured cement to match with existing floors on10mm thick plaster in CM 1:3 complete all as specified and as directed |
| 47 | M&L for fly ash brickwork, straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of old brick work in any description complete all as specified and as directed |
| 48 | Demolition of cement concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 49 | M&L for 100mm thick PCC type D-2(1:4:8) as in sub base on rammed earth complete all as specified and as directed |
| 50 | M&L for 20-22mm thick pre-polished chequred tiles over 20mm thick screed bed in CM 1:6 with coloured or grey pigment match with existing floor complete all as specified and as directed Make:Endura/Hindustan or equivalent |
| 51 | M&L for granite (of any type) 18-20mm (table top rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, WHB platform and marble dust with admixture of pigment to match with marble shade incl making full curving the edges and dismantling existing floor over 15mm screed bed in CM 1:4 complete all as specified and as directed |
| 52 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 53 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed |
| 54 | M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed |
| 55 | M&L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of primer complete all as specified and as directed |
| 56 | M&L for preparation of new surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 57 | Taking down of chowkhats or frames exc 1.5sqm but n.exc 4.0 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed |
| 58 | Taking down of chowkhats or frames n.exc 1.5sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed |
| 59 | S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quality and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and asdirected. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 60 | M&L for factory made 100% solid wood plastic composite (WPC) door frame single rebated 90mm x 45mm made from wood plastic composite (Single extruded process) material with density 780kg/ cum all as directed. Note:-During fixing of chowkat, surface shall be make good in plumb with existing finishes like cement plaster walltiles, floor tiles etc and as per ans site requirement fixed with screwsnot less than 50mm on existing chowkats or timber framed work complete all as specified and as directed |
| 61 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (single extruded process) material with density 780 Kg/ Cum,all as specified and as directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site reqd. |
| 62 | S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats incl two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 63 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 64 | S&F for factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed |
| 65 | S&F for 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed on door complete all as specified and as directed |
| 66 | S&F for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed on door complete all as specified and as directed |
| 67 | S&F for 100mm size butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, type B-11 fixed on chowkat with brass/stainless steel screws complete all as specified and as directed |
| 68 | S&F for 125mm size extruded aluminium alloy handles, fabricated type,anodised fixed with screws on doors complete all as specified and as directed |
| 69 | M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross "T" 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and as directedMake:-Gyproc/Armstrong. |
| 70 | M&L for complete removal of existing treatment and applying two coats of OBD over a coat of primer including 1mm thick wall care putty complete all as specified and as directed (Note:plastering shall be measured and paid in separately). |
| 71 | Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 72 | M&L for 25mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed |
| 73 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed |
| 74 | M&Lnon-skid coloured ceramictiles7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4and complete all as specified and as directed |
| 75 | M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. Make : Kajaria /NITCO/Johnson. |
| 76 | M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed |
| 77 | S & F in repairs 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) complete all as specified and as directed |
| 78 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 79 | S&F in replacement stainless steel plate rack of size 787mm X 914mm X 254 mm complete all as specified and as directed CAT PART NO:- P-348 of Pryag or of equivalent make as per Appx "A" as approved by GE |
| 80 | S & F in repairs 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) complete all as specified and as directed |
| 81 | S & F in repairs15mm pillar tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and as directed |
| 82 | S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed |
| 83 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed |
| 84 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed |
| 85 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed |
| 86 | S&F in repairfor PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed |
| 87 | S&F PVC (SWR) vent cowl of size 110mm bore complete all as specified and as directed |
| 88 | S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glasslouvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section with provision for exhaust fancomplete all as specified and directed. |
| 89 | Taking down the shutter of size exc. 1.5 sq. m but n exc 4 sqmeachcomplete and refxing again in same opening after complete all as specified and as directed |
| 90 | Supply and fix for 35mm thick flush shutterssolid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters includingtwo coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed. |
| 91 | S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples completeall as specified & as directed. |
| 92 | S&F Stainless steel butt hinges medium weight 100mm complete all as specified and as directed.NOTE :- All screws shall be self tapping chrome plated and length ofscrew not less 38 mm |
| 93 | S&F in repair, 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed |
| 94 | S&F Stainless steel sliding door bolts, plate type,bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as specified and as directed |
| 95 | S&F Stainless steel Tower Bolt of 200 mm long ( selected quality as approved )fixed with Self Tapping screws complete all as specifed and as directed |
| 96 | S&F Stainless steel Handel of 150 mm ( selected quality as approved ) long fixed with Self Tapping screws complete all as specifed and as directed |
| 97 | M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed |
| 98 | M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applyingtwo coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc complete all as specified and as directed |
| 99 | M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer and 3mm wall care putty complete all as specified and as directed |
| 100 | S&F Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specifiedas directed |
| 101 | Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to storecomplete all as specified and as directed |
| 102 | Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion includingS & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves igh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mmbrass stop cock etc.complete all as specified andas directed. |
| 103 | M & L Textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includinga screedbed of 15mm thick in CM (1:4)including demolition of existing tiles complete all as specified and as directed. Make:- Johnson Endura textured design or equivalent of Kajaria/Somany). |
| 104 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposing the debris off the defence premises complete all as specified and as directed |
| 105 | M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition ofexisting cement concrete complete all as specified and as directed |
| 106 | Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface byapplying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 107 | M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc.such as , CEMISTIK PU 50 heavy Duty watererproofing coatingor equivalent complete all as per manufacturer instruction as directed. |
| 108 | Dismantling of Mangalore tile single layer pattern or similar tiles in roofing complete all as specified and as directed |
| 109 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and as directed. |
| 110 | Dismantling timber scantlings 40 sq. cm and over in section in any position complete all as specified and as directed |
| 111 | M&L for Providing, cement concrete 1:2:4, type B-1(20mm graded crushed stone agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed |
| 112 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E- 250) quality-A complete all as specified and as directed |
| 113 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and as directed. |
| 114 | Ditto- all as per item No 113, here in before but wall surfaces for skirting/ dado of the wall surfaces match with floor tiles over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed |
| 115 | M&L for preparation of new plastered surfaces of walls and applying two coats of two coats of acrylic weather coat paint (APEX) over a coat of primer complete all as specified and as directed |
| 116 | M&L for complete removal of existing treatment on old plastered surfaces and applying two coats of acrylic weather coat paint (APEX) over a coat of primer including plastering of defected existing surfaces complete all as specified and as directed (Note:plastering shall be measured and paid in separately). |
| 117 | M&L for preparation of old surface shall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of OBD including filling of putty deepessions of scrapped on ceiling surfaces complete all as specified and asdirected. |
| 118 | M&L for Powder coatinganodised aluminium frame for doors,windows, ventilators with one or morerebates (Min thickness of powder coating 50micron) including joining cleat for fixing etc. complete all as specified and as directed |
| 119 | S&F for powder coating of any colour (thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed |
| 120 | S&F in 150mm , mild steel helical door spring, ordinery quality rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 121 | S&F 140mm size floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed with door complete all as specified and as directed |
| 122 | M&L for preparation of new surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 123 | M&L for cement concrete type D2 1:4:8 (Using 40mm graded aggt) as foundation, filling and mass concretecomplete all as specified and as directed |
| 124 | S&F in mild steel compound girders and stanchions, lattice girders aerial masts, staging for water tank and the like including caps bases, splices etc built up from two or more beam or channel sections or angle with plates, including all lattice bars, stiffeners, gusset plategrade Fe-410-W(Gde-E-250) quality- A complete all as specified and as directed |
| 125 | M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed and rammed to a true surface complete all as specified and as directed |
| 126 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and as directed |
| 127 | M&L 25mm thick cement concrete type B-1, 1:2:4 (12.50mm graded aggregate) as in flooring incl pannel laid in alternate complete all as specified and as directed |
| 128 | M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer"s instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by usingconstruction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer"s instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved. |
| 129 | M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock |
| 130 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface ofwalls /ceilings etc with PVC Modular flame retardant surface box of suitable module, with earth dolly, covered with modular white cover plate & frame for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following One light / wall / exhaust fan / ceiling fan pointcontrolled by one way switch 6 Amps complete all as specified and as directed |
| 131 | "-Ditto- all as per item No 130 above but One5 pin socket outlet plug point, 6 Amps, controlledby one, switchon same board complete all as specified and as directed |
| 132 | "-Ditto- all as per item No 130 above but One5 pin socket outlet plug point, 6 Amps, controlledby one, switchon independent board complete all as specified and as directed |
| 133 | "-Ditto- all as per item No 130 above but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independentincluding necessary running of 2.5 Sqmm PVC insulatedmultistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dollyproviding Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directed |
| 134 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in brick / stone masonry walls etc, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches, sockets, regulatorsincluding PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dollyproviding Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following all as specified and as directed for the following One light / wall / exhaust fan / ceiling fan pointcontrolled by one, one way switch 6 Amps complete all as specified and as directed |
| 135 | - Ditto- all as per item No 134 above but One5 pin socket outlet plug point, 6 Amps, controlledby one, switchon same board complete all as specified and as directed |
| 136 | - Ditto- all as per item No 134 above but OneOne5 pin socket outlet plug point, 6 Amps, controlledby one, switchon independent board complete all as specified and as directed |
| 137 | - Ditto- all as per item No 134 above but One One light point controlled by controlled by one, one way switch 6 Amps with additionalonelight points on the same switch circuit complete all as specified and as directed |
| 138 | - Ditto- all as per item No 134 above but One using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point, 6 Amps independentincluding necessary running of 2.5 Sqmm PVC insulatedmultistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directedall as specified and as directed |
| 139 | Supply and fixingModular Switch - 6 Amps, Single pole one way, one module complete all as specified andas directed. |
| 140 | Supply and fixingModular Switch - 16AX 1 Way switch with indicator one module ” complete all as specified andas directed. |
| 141 | S & FModular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified andas directed. |
| 142 | S & FModular socket outlet multipurpose 6/16 Amps shuttered type, 2 module , complete all as specified andas directed. |
| 143 | Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed. |
| 144 | S & F Ceiling rose, 3 phase / PVC / polycarbonate,complete all as specified andas directed |
| 145 | Supply and fixing ceiling fans(5 Star rated) High speed working on single phaseinput voltage 140-285 , Sweep- 1200 mm,350 RPM (±10%) ,complete with compact BLDC Motor,blades, down rods, incl of remote canopy and all accessoriesincluding making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan complete all asspecified & as directed. Make-Havells (Enticer), Orient(Aeroquiet) , Bajaj (Energos), |
| 146 | Supply and fix exhaust fan,AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1300 RPM, Power 20 Wwith BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all asspecified & as directed . Make- Atomberg (EFFICIO) |
| 147 | Taking down fan, hanging at any height, of any sweep, sealing cable end, dismantling blades and removing fan and blades to store for keeping in safe custody during execution of work and hanging in same position or at site as directed after proper cleaning, replacement of minor parts such as lock pins, nuts bolts, washers, rubber real insulators and connecting up including provision of cable from ceiling rose or connector to fan etc complete all as specified and directed. |
| 148 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 149 | Supply and fixing20/22 WattInverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020 |
| 150 | Supply and fixing 7 Watt, Aluminum white powder coating, bed side light fitting with Adjustable head for better beam and focuscomplete with all accessories prewiredincluding provision of flexible copper conductor cable of suitable size from ceiling rose to connectorcomplete all as specified and as directed. Make Philips Cat No 31437 |
| 151 | Supply and fixing Multicolour changable, recess-mounted, white powder-coated CRCA housing with full mounted acrylic di user (2ft x 2ft) 36 Watt fitting complete all accessories prewired complete all as specified and as directed . Make Jaquar cat No-LULT01S036XM, Philips ( Smart Glow ), Halonix Cat No- HLFPR22-27-36-CW-WC |
| 152 | Supply and fixing surface panel LED Lights 18 Watt , all accessories prewired complete all as specified and as directed. Make Lucker Cat No LNPSRR18, Bajaj cat No -BGSLO SLEEK SURFACE 18W WH RD |
| 153 | S & FLamp holder, (Angle/ bracket) insulated body,with back platefor batten fittings complete all as specified andas directed |
| 154 | Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed |
| 155 | Supply and fixing 10 Watt LED High quality aluminium extrudedfitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and necessary mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make- Jaquar Cat NoLGLZ01X010XW, Halonix cat No HLB-03-10-CW-AL, Havells cat No- LHEXBYPNIN1W010 |
| 156 | S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked,providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directedall as specified and as directedcomplete all as specified andas directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). |
| 157 | Taking down carefully existing unserviceable main switch /cutout /DBs, Meter Board Boxof any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed. |
| 158 | S & F Vertical TPNDistribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz,suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C( Frame1) and SP/TP MCB"s as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed. |
| 159 | S & F sheet metal enclosure MCB DB SPN 8 waywith 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed |
| 160 | Supply and fixing amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB)SP 5 To 32 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 161 | Supply and fixing amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB)SPN 5 To 32 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 162 | Supplied and fixed Four pole MCCB,Thermal Release Range 63-80 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA)complete all as specified and as directed |
| 163 | Supply and fix for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire, average width of aperture 1.40 mm etcusing ‘Jindal” aluminium section including setting aside cement concrete window type of any typecomplete all as specified and directed by Engineer-in-Charge. |
| 164 | Supply and fix ready made outdoor type heavy duty polymer earth pit chamber box of inner size 300mmx300mmx260 mm with provision of entry glands for earthing strip/ GI pipe and cover complete all as specified and as directed by Engineer-in-Charge.(Note sample is kept in GE Ofiice sample room) |
| 165 | M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron(average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed.Make: JEF Technology or equivalant in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type ofsoil/strata, testing on completion,Copper strip20x3 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.(b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing |
| 166 | S & F submain wiring with 2 single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through includingon surface PVC conduit and conduit accessories heavy duty ISI marked,providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiringin DBs, switch boards, fittings fixturesall as specified and as directedall as specified and as directedcomplete all as specified andas directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). |
| 167 | Supply and fixingModular Bell push - 6 Amps, Single pole one way, one module complete all as specified andas directed. |
| 168 | Supply and fixing, Ding Dongbell suitable for operation on AC. 230 volts, single pole complete all as specified andas directed. |
| 169 | Supply and fixingLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampconnecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ |
| 170 | Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 20 Watt LED lamp including lamp “ Make Lucker Model Boxy Eco4 complete all as specified and as directed |
| 171 | Supply and fixing LED street light fitting 36 Watt or above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make JaquarCat NoLPCRSRT 36WXC Note :- (i) GImedium grade pipe bracket of 1.5 Mtr length, size of pipe suitable to mouth of street light fitting along with nuts, botts washers and MS flat iron clamps of size as ordered shall deemed to be included in the unit rate quotated. (ii) Rate quated shall be inclusive of provision of 1.0 Sqmm 3 core copper conductor cable multistranded fromceiling rose to light fitting |
| 172 | Supply and fixingEnergy Efficient BLDC Motor,wall mountedfan , Power-32 W consumption on high speed,Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade,and making connections complete all as specified & as directed. Make- Atomberg (EFFICIO +) |
| 173 | Supplying and fixing in repair 10Sq mm 2Core, 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular |
| 174 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 175 | Supply and fixing 24 Watt LED high quality design PC Batten fitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make- Jaquar Cat No-LGLZ01X024XW or equivalent |
| 176 | Supply and fix for energy saving new generation environmentalfriendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded fromceiling rose to light fitting including1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron ofsize 25mm x 5mm, nuts, bolts etc , as approved, complete all as specified and as directed. Make- Jaquar Cat No LPCRSRT30WXW or equivalent |
| 177 | Supply and fixing amp rating 415V 10KA "C" curve miniature circuit breaker (MCB) TPN 40 To 100 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 178 | Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed. |
| 179 | Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed. |
| 180 | Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 181 | Taking down/out unserviceable UG Cables of any Cross Sectional Area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls / poles, segreating serviceable Bricks/Precast covers, pipes, cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE : Earthwork will be measured and paid under appropriate Items. |
| 182 | Supply & laying LT UG XLPE sheathed PVC insulated screened,PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 16 Sqmm 4 core,laid in trenches / on surface of wall / along with Pole in and passing throughcable protection corrugatedpipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed. NOTE (i) Earthworks, Corrogatted pipe for cable protection,will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , & Mild steel flat clamp of size not less than 30x5mm for securing cable pipe along pole , on wall with nut, bolt, washers etc is deemed to be included in the item rate quoated. |
| 183 | Supply and laying Double Wall Corrugated ( DWC ) HDPE pipes of size 50 mm, chemical resistance, flexible, tough along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed. |
| 184 | M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried vertically directly in ground (Earth pit not less than 2.25mtr deep below normal ground level andtop edge of the plate not less than 1.5 mtr below ground level),connected to and including galvanized steel eathing lead wire 4 mm dia by means of bolts nuts check nuts and washers etcGI pipe 15mm dia medium grade for protection of GI strip both to be provided to the extent of 7.5 meters, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/ plinths or fixed on walls oe concealed in walls etc with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate , including PCC (1:2:4) type B-1 earth pit with MS angle iron frame , cast iron cover with locking arrangement, with GI pipe 20mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of strata and testing on completion. |
| 185 | Note:- GI wire 4.0 mm dia and GI pipe 20 mm bore medium grade for encasing GI wire 4.0 mm dia beyond 7.50 M length per earthing if so required at site shall be measured and paid for seperately under relevant items. |
| 186 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
