Military Engineer Services-MES has published Tender For Provision Of Certain Deficient Facilities At Explosive Area At Ncn Server Room And Addl Altn Roof Of Old Admin Bldg At Nad Folding Gate For Garage For Special Veh And Sliding Door At Entrance Of Coral Pearl Oyster At Nih Goa Under Ge Goman. Submission Date for this Tender is 20-12-2022. Explosives Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-12-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of AC corrugated/semi corrugated) sheets as in roof covering all as specified and directed by Engineer-in-Charge. |
| 2 | Material & Labourfor02 coat of Anti corrosive paint on steel surface over a coat of of primer incl preparation of old steel surface. |
| 3 | Demolition of Brick work or stone/boulder masonry, built in Cementmortar including all quoins, arches, pillars, etc, but excluding ashlarfacings, dressed stonework and precast concrete articlesall as specified and directed by Engr in charge. |
| 4 | M & L for Pre-cast cement concrete block masonry with solid blocks,type C-1, 1:3:6 (using 20 mm graded aggr), exc. 10 cm in width and setting in mortar 1:4, complete. |
| 5 | Taking down cement plaster on brick work or stone walls including racking out joints ,hacking for key,scrubing down with water etc |
| 6 | Material & Labour for rendering in CM 1 : 6 ,15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement |
| 7 | Material & Labour for renderuing in CM 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth with out using extra cement. |
| 8 | M&L preparation of new surfaces & applying two coats cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 9 | M&L preparation of Old surfaces & applying one coats cement base paint complete all as specified and directed. |
| 10 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covring cladding to wall fixed with self tapping screws as specified . |
| 11 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 12 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out from soft disintegrated rock all as specified and as directed. |
| 13 | M & L cement concrete type D2, 1:4:8 (using 40 mm graded aggregate)in foundation filling and mass concrete all as specified and as directed. |
| 14 | Excavationover areanot exc 1.50m deepand getting out in soft/disintegrated rock. |
| 15 | Returning, filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm deep as in soft/ disintegrated rock complete all as soecified and directed |
| 16 | Removing excavated material (Rock) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed. |
| 17 | M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface |
| 18 | Material & Labourfor 100 mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregate), as in sub base of floor.all as specified and directed by Engr in charge. |
| 19 | M&L 50mm thick sand filling under floors or in foundations including watering and consolidation |
| 20 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigmentall as specified and directed by Engr in charge. |
| 21 | Material & Labour two coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) over a coat of acrylic amulsion primer including preparation of new concrete surface of any description all as specified and directed by Engr-in-Charge. |
| 22 | M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 as in backing coat |
| 23 | M&L for 20 mm thick granite of any type tiles machine cut, in skirting/dado laid over cement scredd and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. |
| 24 | M&L TMT steel bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding withmild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars.all as specified and as directed. |
| 25 | M&L TMT steel bars 8mm dia, cut length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding withmild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars.all as specified and as directed. |
| 26 | S&F for framed work as in door or gateof angle or other section with gusset plates, rail braces etc complete drilled for filling sheeting or other covering door etc to prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and welding etc all as specified and directed by Engr-in-Charge (FE-410W Gde E-250quality A) |
| 27 | M&L forTwo coats of of synthetic enamel paint over one coat of primerincluding preparation of new steel surfaces all as spcified and as directed. |
| 28 | M&L RCC nominal mix type B1 (1:2:4) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete |
| 29 | M&L RCC nominal mix type B1 (1:2:4) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts |
| 30 | M&L for formwork to sides of concrete foundations, footings bases of columns plinthbeam and similar works flat and rough finished surface etc. |
| 31 | M&L for formwork to sides of pillars, posts, struts and columns and similar works flat and rough finished surface etc. |
| 32 | M&L Cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified. |
| 33 | S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etcall as specified and directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 35 | S&F Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete:but gear operated type with bevel gear box and crank handle thickness of lathe 1.25mm incl taking down old rolling shutter. |
| 36 | S&F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete incl taking down old steel gate. |
| 37 | Taking down broken old Aluminium door of any size and any description. |
| 38 | S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 39 | S&F aluminium powder coated Doorshutters alumium section weighing 0.55kg/sqm including necessary joining cleats glazing clips rubber neoprene packing handles 2 nos in each door hinges anodised |
| 40 | S&F 5.5mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane |
| 41 | S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. |
| 42 | Demolition of cement concrete (Unreinforced) concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 43 | M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 44 | M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete |
| 45 | M&L 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded agregate) as sub floor |
| 46 | M&L 15 mm thick screed bed or bedding layer of cemntmortar 1:4 for laying floor finishes. |
| 47 | M&L for rendering 10mm thick backing coat in CM 1:4 to receive tiles on vertical surfaces of wall |
| 48 | M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 49 | M&L preparation and applying two coat of aluminium paint on new steel surface of any description, not otherwise, described, over 10cm width or girthover a coat of aluminium red oxide for rolling shutter. |
| 50 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit andbetter indoor air quality with minimum 3 star rating andcapacity 2 TR with copeer tubing condensor including all necessary fixing arrangement and accessories including mounting bracket for outdoor unit. Make: Daikin / Carier/ Hitachi. Note: (1)The cost of AC also includes cost of copper tubing and insulation as per manufacturer. (2) If extra copper tubing and insulation required at site, the same will be measured and paid seperate under respective item of sch. |
| 51 | M&L for voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 volt to 290 volt with output voltage stabilized at 230 volt with accuracy of +/-2.5% for the capacity 5 KVA. Make: V Guard, Everest, Servomate. |
| 52 | Supply & Fixing of sheet metal enclosure single pole and netural with a two pin and earth metal plug and socket complete with one single pole MCB 240 Volts 20 Amps Make: Legrand/ Havells/ Anchor |
| 53 | Supply and fix insulation for copper tubes of split type AC units,insulation type superion of sizen 3/8"diameter |
| 54 | Supply and fix insulation for copper tubes of split type AC units,insulation type superion of sizen 5/8"diameter |
| 55 | Supply and fix in repairs copper tubing soft grade suitable for split type AC suction /discharge line of size 5/8" diameter |
| 56 | Supply and fix in repairs copper tubing soft grade suitable for split type AC suction /discharge line of size 3/8" diameter |
| 57 | Supply & Fixing submain wiring with 2 Runs of 4 Sqmm, PVC insulated, unsheathed, single core, multi stranded, 1100 volts, copper conductor cable drawn in and including 25/32mm wide PVC casing and caping with all accessories such as tees, elbows, juction box, reducers etc as required along with 1 run of 4 sqmm PVC insulated, unsheathed, single core, multi stranded coper conductor cable as continuous earth wire and connecting to existing main switch board/Distribution Board and testing on completion including taking down old submain wiring of any type with conduit comlete all as directed by Engineer-in-Charge. Note : 3 runs of 4 SqmmPVC insulated, unsheathed, single core, multi stranded copper conductor cable and 1 run of PVC casing/caping 25mm/32mm wide shall be measured as single run. Make: V Guard/ Havells/ Anchor |
| 58 | M&L for provn of electrogrip safe chemical earthing , electrode made of 17mm dia copper rod, 3 mtr long with connecting strip head with SS fastener, inspection joint box and also connect copper strip with electrode rod and inspection joint box with nut, bolts and GI washers etc .The electrodes will be filled with highly conductive non-corrosive crystalline conductive mixture with connective arrangement for connection of strip/cable etc. The electrode will be installed along with conductive and low resistance powder tested to the resistivity of 0.2 ohms as per IEC 62561-7 read with ASTM G57-06, CI 3.4 connected to copper earth strip by means of nut bolts check nuts and washer of GI or steel including necessary drilling in earth upto 3 mtr in any type of soil for inserting electrode in any type of strata, PCC 1:3:6 type C2 for earth pit of suitable size and earth pit cover with frame including chemical using for such type of earthing complete all as directed by Engr-in-Charge. |
| 59 | Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper strip as per directed by Engr-in-Charge. |
| 60 | M&L for layingGI pipe 25mm dia light grade use for the protection of copper strip. Make-Prakash/Jindal/ TATA. |
| 61 | M&L for fixing of copper sling 1.5 mtr long including connector to connect with the copper strip and article complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
