Military Engineer Services-MES has published Repair To Footpath, Fencing Gate, Drains And Culverts Etc From Furniture To Ljs Enclave In Ii Line Under Ge Alipore Kolkata. Submission Date for this Tender is 16-12-2022. Footpath Work Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting ut,returning,filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering & removing surplus soil to a distance n exc 50m and making good surface in hard/densesoil complete all as specified and as directed by the Engr-in-Charge. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including takingout embedded portion and making good disturbed ground complete all as specfied and as directed. |
| 3 | Dismantling fencing wire mesh, any type complete all as specfied and as directed. |
| 4 | M&L cement concrete 1:3:6using 40 mm graded stone aggregate as in Cement concrete in foundations, filling and mass concrete complete all as specified and as directed. |
| 5 | S&F for rolled mild steeljoist, channel, angle, or tee section, fixed independantly, without connecting plates, etc. as in post conforming to Fe 410 W (gde E-250 quality B). complete all as specified and as directed |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. complete all as specified and as directed. |
| 7 | Supply only chain link MS galvanised Chainlink fencing of approved size or typeweight as directed per square metreas approved. complete all as specified and as directed. |
| 8 | S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured |
| 9 | S&F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm diaor securing with clips quality conforming toround barbars. complete all as specified and as directed. |
| 10 | S&F flat iron as for securing wire mesh etc. posts and struts in fencing including cutting tops to shapeas directed, drilling holes,notching for wire, etc.; flat ironfillets ) including all necessary drilling, bolting or riveting, etc.,and similar work conforming toFe-290 Gde E-165 complet all as specfied and directed. |
| 11 | S &F MS screw bolt (machine made with hexagonal or square head at one end and screwed the otheror screwed both ends each screwed end to be fitted with washers and one hexagonal or square n exc 5 cm long dia of neck 5 to 10 mm complete all as specified and directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 13 | S&F for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of watertanks and similar work conforming Fe-290, Gde E-165 complete all as specified and directed. |
| 14 | M&L for two coats of synthetic enamel paint over a coat of primer including preparation onnew steel surfaces ofany description over 10 cm width or girth complete all as specified and directed. |
| 15 | M&L for one coat of synthetic enamel paint including preparation on oldsteel surfaces ofany description over 10 cm width or girth complete all as specified and directed. |
| 16 | M&L for two coats of synthetic enamel paint over a coat of primer including preparation onnew steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint. complete all as specified and as directed. |
| 17 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed. |
| 18 | M&L brick work with sub class "B" brick straight of curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 19 | M&L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed. |
| 20 | M&L for PCC (1:2:4) type B-2 (40mm graded aggrgate) as in surface channels and drains complete all as specified and as directed. |
| 21 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed. |
| 22 | All as per item No 21 above add for each 25 mm girth or part thereof over or under 30cm. complete all as specified and as directed. |
| 23 | Demolition of cement concrete (unreinforced) ofany descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and as directed. |
| 24 | M&L PCC (1:4:8) type D-2(using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 25 | M&L for laying silver sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed |
| 26 | M&L for 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658- 2006 M-40 Grade with grey cement and no pigment complete including taking down existing paver blocks all as specified and as directed. |
| 27 | All as per item No 26 here in before but 60mm thick ditto. |
| 28 | All as per item No-26 here in before but except tiles. Note : Materials (paver block) retrived from item No 26 & 27 shall be reused after cleaning. |
| 29 | M&L for 75mm thick PCC (1:3:6), type C2 (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even and smooth with using extra cement as complete as specified and directed. |
| 30 | M&L providing cement concrete with type B1 (1:2:4) (using 20mm graded stone aggregate) as in coping and the like including weathering slightly rounded or chamferred angles and throating as directed. |
| 31 | Demolition of re-inforced cement concrete (re-inforcement cut as required to facilitate demolition) ofany descriptions, in Ground floors not exc 150mm thick, above or below ground level complete all as specified and as directed. |
| 32 | M&L for providing RCPC factory made 75mm precast RCC cover slab of 3MT load bearing capacityconforming to IS : 12592 (Grade M-30) 3for drain cover and manhole cover, complete all as specified and directed. (Make : RCPC or equivalent as approved by the GE) |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and as directed. |
| 34 | M&L for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400mm x 400mm x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 35 | Taking down cement plaster or lime plaster of any description from stone or brick wall/ ceiling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD land complete all as specified and directed. |
| 36 | M&L for rendering 15 mm thick in cement mortar (1:4) on brick walls finishing even and smooth (with out using extra cement)etc including necessary working platform complete all as specified and directed. |
| 37 | M&L preparing new plastered orpreviously untreated plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 38 | M&L for two coats of weather proof exterior emulsion paint on new surface or previously untreated surface of external walls incl preparation to remove all foreign materials including necessary working platform complete all as specified and directed. |
| 39 | M&L for precast cement concrete (1:2:4) type B-0 (Using 12.5mm graded stone aggregate) kerbs stone rounded or chamfered on edges as in edge of path, hard standing built in cement mortar (1:6) complete all as specified and as directed. |
| 40 | Exavation intrenches in Hard / dense soil n. exe 1.5 m wide and n. exe 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n exe 10 sq m on plan n exe 1.5 m depth and getting out complete all as specified and directed |
| 41 | Returning, filling in, including spreading, levelling, wateringand well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 42 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed. |
| 43 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 44 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and as directed. |
| 45 | S&F prepainted galvalume aluminium zinc coating plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof ridges /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 46 | Cleaning of deposited earth , silt debris from covered drain after shifting of drain cover and placed the drain cover to its original positon after cleaning of drain complete excavated earth shall be removed outside MD land exc 1.5 KM but not exc 5 KM distance complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
