}

Construction Of ( 3.60 Mtr. X 3.00 Mtr. ) Switch Room Cum Chlorine Room With Water Supply Sanitary Arrangement ( As Per Deptt. Drawing ) At 4Th Tube Well Sites Of Khejurberia Water Supply Scheme Under Tamluk Sub Division Of Tamluk Division, Phe Dte., tamluk-West Bengal

Public Health Engineering Department-PHED has published Construction Of ( 3.60 Mtr. X 3.00 Mtr. ) Switch Room Cum Chlorine Room With Water Supply Sanitary Arrangement ( As Per Deptt. Drawing ) At 4Th Tube Well Sites Of Khejurberia Water Supply Scheme Under Tamluk Sub Division Of Tamluk Division, Phe Dte.. Submission Date for this Tender is 16-12-2022. Chemical Supply Tenders in tamluk West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

34988768
Construction Of ( 3.60 Mtr. X 3.00 Mtr. ) Switch Room Cum Chlorine Room With Water Supply Sanitary Arrangement ( As Per Deptt. Drawing ) At 4Th Tube Well Sites Of Khejurberia Water Supply Scheme Under Tamluk Sub Division Of Tamluk Division, Phe Dte.
Open Tender
Indian
West Bengal
tamluk
16-12-2022

Tender Details

Construction Of ( 3.60 Mtr. X 3.00 Mtr. ) Switch Room Cum Chlorine Room With Water Supply Sanitary Arrangement ( As Per Deptt. Drawing ) At 4Th Tube Well Sites Of Khejurberia Water Supply Scheme Under Tamluk Sub Division Of Tamluk Division, Phe Dte.

Key Value

Document Fees
Refer document
EMD
INR 10226.0 /-
Tender Value
INR 5.11 Lakhs /-

BOQ Items

Name of Work: Construction of (3.60 Mtr. X 3.00 Mtr.) Switch Room cum Chlorine Room with water supply & sanitary arrangement (as per Deptt. drawing) at4th tube well sites ofKhejurberiaWater Supply Scheme under Tamluk Sub Division of Tamluk Division, PHE Dte. Purba Medinipur.
Sl. No. Item Description
1Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing ,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling,dressing and ramming the bottom,bailing out water as required complete.
2(a) Depth of excavation not exceeding 1,500 mm.
3Filling in foundation or plinth by silver sand in layer not exceeding 150mm as directed and consolidating the same by thorough saturation with water ramming complete including cost of supply of sand.(payment to be made in measurement of finished quantity)
4Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints withlocal sand
5Cement concrete with graded Jhama khoa (30mm size)excluding shuttering in ground floor andfoundation. a) 1:3:6 proportion.
6Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thickness, with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof of ground floor),
7i)25 mm. to 30 mm. thick wooden shuttering as per design and direction of E.I.C.
8ii)25 mm. to 30 mm.shuttering without stagingin foundation.
9Reinforcement to R.C.C. structures including cutting to size, binding, and placing the same in position ready casting etc. all complete including the cost of binding wire and duly binded aty every intersection or as per instruction of the Engineer.
10(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.
11(i) Tor steel/mild steel,(Other than TATA)
12Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm.size) excluding shuttering and reinforcement, if any. In ground floor as per relevant IS Codes, IS:456-2000, a)Pakur variety
13Brick work with 1st class bricks in cement mortar (1:4)
14a) In foundtion and plinth. (1:4)
15Brick work with 1st class bricks in cement mortar (1:4)
16(b) In superstructure, ground floor
17125mm. thick Brick work with 1st. Class bricks in cement mortar (4:1) in ground floor .
18Artificial stone in floor , dado, staircase etc. with cement concrete (1:2:4) with stone chips laid in panel as director with topping made with ordinary or white cement ( as necessary )and marble dust in proportion (1:2) including smooth finishing and rounding of corners and including application of cement slurry before flooring works , using cement @1.75 Kg/Sqm. All complete including all materials and labour. a) 35mm thick (average)in ground floor.
1925mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10mm normal size.) and painting the top surface with a coat of bitumen using 1.7 kg. per sqm including heating the bitumen and cost and carriage of all materials complete .
20Supply fitting approved type of ventilator in position after cutting hole in wall setting in cement motor mending damages to wall and plaster and two coat of paint of approved brand and shade. Payment of mending two damage of wall & plaster and painting to be made separately.
21R.C.C. ventilator of 20mm thick. (Up to 0.10 sqm area)
22A) For Steel Door (1.05 m. X 2.10 m.) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. Flats and bars for windows, railing etc. fitted and fixed eith necessary screws and lugs in ground floor.
23a) grill weighing above 16kg/sqm
24b) for hanging and locking arrangements for gate including supply of materials and labour complete.
25c) Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. A) For Steel door (1.05 m. X 2.10 m.) both faces
26B) For Steel Window (0.90 m, x 1.35 m.)
27Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excludingglazing.
28a) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
29(i) Two point nose steel handle including fitting and fixing.
30(ii) steel peg stay 300 mm long including fitting and fixing.
31iii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. Flats and bars.
32i) Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 4 mm thick
33Plaster ( to wall, floor , ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating nosing and drip course where necessary ( ground floor ) [ Excluding cost of cxhipping over concrete surface]
34(ii) WithCement mortar ( 20mm thick )
35a)20 mm thick plaster 1:6
36b) 15 mm thick plaster 1:4
37c) 10 mm thick plaster 1:4
38Neat cement punning about 1.5mm thick in wall dado window sills floor drain etc.
39Applying Exterior grade Acrylic primer of approved quality and brand on plasteredor concrete surface old or new surface ot received decorative texture 9 matt finish ) or smooth finish acrylic exterior paint including scraping and preparing the surface throughly complete as per manufacturs specification and as per direction of the EIC.. In ground floor(ii) two coat
40a) GL to 4.0 mtr
41Protective and Decorative Acrylic exteror emuilsion paint of approved quality, as per specification and as per direction.of EICto be applied over acrylic primer as required . The rate includes cost of materials, labour, scaffolding and all incidental charge but excluding the cost of primer.(a)Two coats
42i) super protective 100% acrylic emulsion
43a) GL to 4.0 mtr
44(b) Priming one coat on steel or other metal surface with synthetic oil bonded primer of approved quality including smoothening surface by sand papering etc.
45Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface of necessary.
46b) on steel or other metal surface.
47i) With super gloss (Hi-gloss)
48two coats (any shade except white)
49Number plaque of building plaque size up to 22.5 mm x 22.5 mm made of sand cement plaster 1 : 2 on face of wall or plinth with 50 mm size letters P.H.E. etc and the number of the structure formed thereon (in sunk type) including painting the letters and the number complete as per direction of EIC.
50Supplying, fitting and fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through massonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun, Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes i) 110 mm.dia.
51Polymer concrete made with water resistant bonding agent of synthetic rudder emulsion as per manufacturer"s specification excluding the cost of cement concrete (2.75 kg/bag of cement) Note Payment on volume of (1:1?2: 3) Concrete.
52Supplying Godrej Navtal lock chromium plated with latch and keys 4 levers including fitting & fixing complete.
53Suppling fitting & fixing fan hook for celing with 1 mtr. Long 16 mm dia rod complete including damages.
54Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished.
55a) With earth obtained from excavation of foundation.
56Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pitconsisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect .i) with pakur variety (SAIL/TATA/RINL).
57Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement morter (1:4) including two nos. 560 mm.dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted & fixed in the 100mm thick R.C.C. (1:1.5:3) top slab necessary fittings 20mm.thick cement plaster (4:1) with net cement finish to the internal surface & 15mm thick cement plaster (4:1)to outside wall up to 200 mm. below G.L. floor finished with 25 mm thick gray artificial stone over 100mm thick R.C.C. (1:1.5:3) bottom slab incuding supplying, fittin and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, boiling out & pumping out water as necessary, ramming, dressing the bed & refilling sides of the tank with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber & including constructing all necessary pipes,
58joints etc,with internal plaster work & artificial stone flooring is to be done with admixtures of water proofing compound @ 5% by weight be cement complete in all respect as per direction of Engineer in charge. (p-88,it-3 Sani. & Plum)
59a) For 10 users (with pakur variety)(SAIL/TATA/RINL)
60Supplying, fitting and fixing Orissa pattern Water Closet in white glazed vitreous chinaware of approved make in position complete excluding "P" or " S" trap (excluding cost of concrete for fixing).
61Supplying fitting fixing approved patern vent cown ICI conforming to ISS and painting two coats to the exposed surface with approved paint complete. A) 100 mm dia.
62Supplying, fitting and fixing cast iron "P" or "S" trap conformimg to I.S. 3989/2009 and 1729/2002 including lead caulked joints and painting two coats to the exposed surface. (Plainting to be paid seperately (iii) 100mm.
63Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, corss, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials. No seperate payment will be made for accessories, specials.)
64PVC Pipes
6515mm
6620mm
6725 mm
68(Z) Compact CompactBall Valve with SS Handle for CPVC/UPVC fittings. ( As per ASTMD 2467, Schedule 80)
69(i) 25 mm dia
70Cleaning of disinfecting upto 2000 lit water tank including masonry reservoir/ PVC tank
71Polythene Pillar Cock (EMCO/ATLAS or equivalent).
72Supplying fitting and fixing 10 litre P.V.C. low down cistern conforming to I.S. Specification with P.V.C. fittings complete ,C.I. brackets including two coats of painting to bracket etc.
73Supplying P.V.C water storage tank of approved quality with closed top with lid(Black) -Multilayer
74(a) 500 litre capacity
75Labour for hoisting plastic water storage tank.
76(i) upto 1500 litre capacity,upto 1st story from GL
77Labour for punching hole in plastic water storage tank upto 30 mm dia.
78Add GST @18% (CGST@9%+SGST@9%)
79Add Cess @1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail