Mathura Vrindavan Development Authority has published Tender For Establishment Of A Nursery For Cultivation Of 6.00 Lakh Saplings Of Lord Shri Krishnas Beloved Species On The Land Provided By The Municipal Corporation In Sunrakh Bangar Village Under Mathura District.. Submission Date for this Tender is 12-12-2022. Plantation Work Tenders in mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Dec-2022 | Date | Date | 12-12-2022 |
| Sl. No. | Item Description |
| 1 | Supply of JCB machine for levelling etc. with driverincluding P.O.L. all complete as directed by E/I Sno.29 page11UPPWDSOR 2021 |
| 2 | Earth Work in Excavation in foundation in ordinary soil ( Loam, Clay or Sand ). Including lift upto 1.50m and lean upto 30m and including filling watering and ramming of excavated earth into the trenches or into the building and the sides of foundation trenches or into the plinth and removal and disposal of surprlus earth as directed of 30m from the foundation trenches. (UPSOR- 18 Ch-4, Item No.-25) |
| 3 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. |
| 4 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttressas, plinth and string courses, fillels, columns, pillars, piers, abutments, posts and struts etc. including cost of centering, shultering, finishing and excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) i) upto plinth level SOR 5.2.2 |
| 5 | ii) Above Item no 4 but above plinth level |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andbinding all complete.as per Analysis (Make - Tata, Jindal, SAIL) |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. SI 10.2 (Ch-10) |
| 8 | Painting Two coat over applying priming coaton steel and other metal surfaces up to 10 cm width or girth or small articles not exceeding 0.10 sq.m in area with superior synthetic enamel suchas luxol-3, Hi-gloss, apcolite, Superior, Duplex specified brushing to give an even shade and including cleaning the srface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all material, labor, tools and plants etc, required or proper completion of the work. SI no 1a + 2a (new) Ch -15 2020-21 |
| 9 | Providing & laying P.C.C 1:1.5:3 for fixing of pole in cement, coarse sand &20mm guage approved stone grit with neat cement floate coat at top including supply of all materials, labour, etc required for proper completion of the work at directed by E/I. SI 279 |
| 10 | Supply& Carriage of R.C.C Pole of M-20 concrete at site Size 3000 mm length & bottam section 125 x 150mm & top section100 x 125 mm thickness In 4 pleace 8 mm vertical bar with binding In6mm Ring In equal Distance with hole to fix supportstrutsgood Shape & Finishing Including, loading, unloading & Stacking etc. as per samplw peace, work to be completed as per direction of E/I.DSR 16.15.1/2018 ( Analysis rate) |
| 11 | Supply& Carriage of R.C.C Pole Struts of M-20 concrete at site Size 1820 mm length with top portion angled to support pole section 100 x 100mmthickness In 4 pleace 8 mm vertical bar with binding In6mm Ring In equal Distance with holegood Shape & Finishing Including, loading, unloading & Stacking etc. as per samplw peace work to be completed as per direction of E/I. DSR 16.15.1/2018( Analysis rate) |
| 12 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one sidenly, provided with horizontal lines and two diagonals of barbed wire weighing 11.80 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid foreparately) :- Payment to be made per metre cost of total length of barbed wire used. 16.17.1 With G.I. barbed wireDSR 16.17.1/2018 |
| 13 | Supply of fixing of welded mesh 25 x 50 mm of 10 gauage wire including supply of all material labour T&P etc as directed by E/I (280+10 % fixing = 308) SI no 24 (i) Ch -1 (2022-23) |
| 14 | Finishing walls with exterior emulsionpaint (Apex) ofapproved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat ofprimer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. (CH-15 Item No. 31 SOR 2020) |
| 15 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. |
| 16 | Construction of Granular sub-Base by providing well grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with smooth wheel roller to achieve the desire density, complete as per Technical Specification clause 401. |
| 17 | S/F Water storage tank P.V.C syntax or equivalent make including float value, connecting Rod of brass, etc all complete. Ch.-19/2 |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.SOR 2022-23 Ch-10 Item 10.16.1 |
| 19 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² SI no 12.1.1 |
| 20 | Class M150 (non Modular) brick work in1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. |
| 21 | 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. |
| 22 | Cement concreteflooring1:2:4(1œment, 2 coarse sand,4 gradedstone aggrega!e) finished with a Paiting coat of neat cement including cement slurry, but excluding the cost of nosing of steps etccomplete. 40 mm thick with 20 mm nominal size stone aggregate |
| 23 | Laying bricksoling layer on prepared sub-gradewith brick on end edging according to lines, graded and cross-section shownonthedrawingfillingjointswithsandandearth, spreading25mmthicklayerofearthoverbricksoling, watering and rolliing the same with threewheel road roller 80-100 kN as per Technical Specification Clause 412 |
| 24 | Providing and laying 6mm thick neat cement floating work complete as directed By E/I(Analysed Rate) |
| 25 | Providing and fixing water closet squatting pan (Indiantype W.C. pan ISI mark) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests including stop cock complete in all respect. 2022-23 |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply includingallCPVCplain&brassthreadedfittings.This includesjointingofpipesAfittingswithonestepCPVC solventcement, drenching,refilling &testingof joints completeas perdirectionofEngineerin-Charge.External work 20 mm nominal outer dia pipes Ch.23:18.9.2 |
| 27 | Providing & fixing P.V.C. pipe fittings T bend sockets, M.S. holdler clamp all complete. 110 mm dia |
| 28 | Constructing brick masonary chamber forunderground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 œment : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not iess than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 soarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrète 1:5:10 (1 cement: 5 fine sand: 10 gradedstoneaggregate40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neatcementonwallsandbedconcrèteetc.complèteaSper standard design : 19.30.1 SOR 2022-23 |
| 29 | Providing andfixingPTMTBallcockofapproved quality,colourand make completewithEpoxycoatedaluminiumrodwithL.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less than 198 gms Ch.-23:18.62.2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
