Urban Local Bodies has published Supplying Of Covered Tipping Refuse/Garbage Trailer(Refuse Vat) 2 Nos For Haldibari Municipality. Submission Date for this Tender is 10-12-2022. Screws Tenders in haldibari West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | COVERED TIPPING REFUSE/ GARBAGE TRAILER: |
2 | Supplying of Covered Tipping Refuse/Garbage Trailer(Refuse VAT) having Specifications: 1. Stainless steel Body- Box Type, Size-10"-0" × 6"-0" × 2"-0"(+17"), Tipping, two Wheeler, Capable of being drawn by Tractor. 2.Chassis: To be fabricated from M.S. Channel 100× 50 × 6 mm with cross member of same section for upper Chassis & 125 × 65 × 6 mm M.S.Channel for Lower Chassis with cross member of same section. 3. Drawbar: Tri-angular "A" type Drawbar to be fabricated form 100 × 50 × 6 mm M.S. Channels fitted with spring loaded "Eye hook" (40mm M.S. Round), Parking screw Jack made of 2" M.S.Round (2"-8" long) with 3" M.S. round Nut fitted in M.S. Channel - 100×50×6mm. 4. Platform: to be fabricated from M.S.channel 75×40×6mm with cross member of same section, by means of jeep type covered with 4mm thick stainless steel plate-304 Grade, electrically welded all joints. 5. Side Boards: Four Nos of Side boards to be fabricated form M.S. Angle 45×45×6 mm with cross member of same section covered with 12 Gauge thick Stainless Steel Plate- 304 Grade. Out of 4 Nos. side boards three sides will be open for remobal of Garbage and front side will be closed. 6. Divider- One No. divided will be insert the inner portion of Traileer for Bio-degradale & Non-Degradable of Size- 6"-0" × 2"-0" (+17") each. Back cover will made in such a way that only either Bio degradable or non degradable item comes outside and made from M.S. Angle, Flat & 12 Gauge Stainless Steel sheet. 7. Hydraulic tipping arrangement- 1 No. Telescopic type Hydraulic Ramp (15 M.Ton) fitted to the lower Chassis of the trailer complete with hydraulic hose, coupling etc. to tip the body at an angle 40/50 degree. 8. Covered Portion- To be fabricated form M.S. Angle 35×35×6 mm & 40×40×6mm covered with 14 gauge thick stainless steel sheet 304 Grade.Two Nos. loading dala on each side. 9. Wheel Equipment- Two nos of pneumatic Tyre wheel 9.00×16 (Nylon, 18 Ply) with tube (CEAT/MRF/GOOD YEAR/JK) and heavy duty Churri Rim Fitted on high tensile strength 70mm Sq. axle, heavy duty forged steel, hubs, taper roller Bearing -30209 & 30211 SKF. 10. Suspension- 2 nos semi arc type fabricated spring or suspended spring 32"-70×12mm - 13ply fitted under the chassis with U-Clamps, Jullon patti, U-Bolts etc. 11. Construction- Arc welded & Bolted. 12. Mirror Polish Finishing. Painting- Tow coats of ICI Synthetic enamel paint over a coat of Primer in Outside one side marked as blue and other side marked as Green & in Inside Anticorrosive Black paint over Red Oxide Primer only on Iron Portion and embossing the name of our Office. 13. Warranty- 1 year Warranty |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail