}

Tender For Renovation Of Dispensary Of Bharatpur Ocp Under Bharatpur Area., bharatpur-Odisha

Mahanadi Coalfields Limited has published Tender For Renovation Of Dispensary Of Bharatpur Ocp Under Bharatpur Area.. Submission Date for this Tender is 05-12-2022. Building Work Tenders in bharatpur Odisha. Bidders can get complete Tender details and download the document.


Tender Notice

34961473
Tender For Renovation Of Dispensary Of Bharatpur Ocp Under Bharatpur Area.
Works
Indian
Odisha
bharatpur
05-12-2022

Tender Details

Renovation Of Dispensary Of Bharatpur Ocp Under Bharatpur Area.

Key Value

Document Fees
Refer document
EMD
INR 32600.0 /-
Tender Value
INR 26.01 Lakhs /-

BOQ Items

Name of Work: Renovation of dispensary of Bharatpur OCP under Bharatpur Area.NIT NO:GM(BA)/SO(civil)/e-Tender/ 2022-23/734 Dt.22.11.2022
Sl. No. Item Description
1Finishing walls with Acrylic Smooth exterior paint of required shade : old work {Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
2Wall painting with acrylic emulsion paint, havinC Voc (Volatile organic compound )content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
3Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
4Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Eneineer-in-Charge. With cement mortar 1:4 (l cement:4 fine sand)
5Brick work with Fly Ash Brick (2301115175 mm saze) bricks of clasr designation 10 infoundation and plihth in: Cement mortar 1:5 (l aemeht 6 coarse sand)
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement:3 coarse sand (zone-lll) derived from natural sources:6 graded stone aggregate 40 mm nominal si2e derived from natural sources)
7Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
8Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of l.S. designation 4.75 mm
9Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
10Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and llght waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charse.
11Making tribal art on prepainted wall specified quality with 100% premium acrylic dirt resistance, sillicone additive exterior paint including one coat back ground painting of different shades and pictorial figure/ writing with appropriate paint of prominent look including cost of paint, labour , material like paint, brush, tools and paint required to the work as per direction of EIC.
12Providint and fixing 1st quality Ultracharge Vitrified wall tiles conforming to lS : 15622 (thickness to be specifred by the manufacture ofSOMANY or other approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skiding, riseG of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointint with grey cement slurry @ 3.3k8 pe. sqm in.luding pointin8 in white cement maxed with pigment of matching shade complete-(800x1600mm wall tiles)
13Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg,/sqm including grouting the ioints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,.lips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm
14Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
15Dismantlint old plaster or skirting raking out joints and cleaning the surface for plaster includinS disposal of rubbish to the dumping ground within 5O metres lead.
16Providing and fixinE aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to lS: 733 and lS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section5 shall be smooth, rust free, straight, mitred and jointed mechanically wherever required ancludang cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)For fixed portion : Anodised aluminium (anodised transparent or dyed to required shade according to lS: 1868, Minimum anodic coating of grade AC 15)
17Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to lS: 733 and lS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section5 shall be smooth, rust free, straight, mitred and jointed mechanically wherever required ancludang cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to lS: 1858, Minimum anodic coating of grade AC 15)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to lS: 1858, Minimum anodic coating of grade AC 15)
18Providing and fixing aluminium sliding door bolts, lsl marked anodised (anodic coating not less than grade AC 10 as per lS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
19Providing and fixing aluminium tower bolts, lsl marked, anodised {anodic coating not less than grade AC 10 as per 15 : 1858 )transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
20Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm
21Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with tPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ol engineer-in-charge . (Cost of aluminium snap beading shallbe paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
22Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
23Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous china Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
24Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
25Provlding and fixing PTMT liquid soap contaioer 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
26Providing and fixinB PTMT towel railcomplete with brackets fixed to woodeo cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm lon8 towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms
27Providing and fixing water closet squatting pan (lndian type W.C. pan ) with 100 mm sand cast lron P or 5 trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to lS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
28Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to lS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with lsl marked white solid plastic seat and lid
29Dismantling tile work in floors and roofs laid in cement mortar including stacking materialwithin 50 metres lead. For thickness oftiles 10 mm to 25 mm
30Providing and fixing Chlorinated Polyvinyl chloride (cPVc) pipes, having thermal stability for hot & cold water supply, including all cPVc plain & brass threaded fittings, i/c fixinS the pipe with .lamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step cPVc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
31Providing and fixing Chlorinated Polyvinyl chloride (cPVc) pipes, having thermal stability for hot & cold water supply, including all cPVc plain & brass threaded fittings, i/c fixinS the pipe with .lamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step cPVc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes
32Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
33Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
3412 mm cement plaster of 1:6 (1 cement: 6 fine sand)
35Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement :2 coarse sand (zone-lll) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources)
36Neat cement punning
37Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing ofjoints etc. complete : 150 mm dia. R.c.c. pipe
38Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
39Applying one coat of water thinnable cement primer of approved brand and manufacture on wall 5urface : Water thinnable cement primer
40Total impact of GST for the purpose of CTC
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2022 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail