Rural Development And Panchayats Department has published Tender For Construction Of Panchayat Office Building At Thiruppanthurai Panchayat, Thiruvidaimarudur Block.. Submission Date for this Tender is 29-11-2022. Building Work Tenders in Thanjavur Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of Panchayat Office Building in Thiruppanthurai at Thiruppanthurai Panchayat, Thiruvidaimarudur Block |
2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification |
3 | Supplying and filling in foundations and basement with fillingM sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications. |
4 | Refilling the Basement with excavated earth including all labour charges for filling as per standard specfication. |
5 | Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. |
6 | Brickwork in CM 1:5 mix using Country Bricks of standard size including cost and conveyance of all materials to worksite, including labour for watering with good water within 200m lead for good water, including all labour and all other incidental charges etc., complete. |
7 | Below Basement |
8 | Above Basement |
9 | Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). |
10 | Below GL |
11 | Above GL |
12 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors etc., complete |
13 | RCC 1 : 1.5 :3 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. |
14 | Below Basement |
15 | Above Basement |
16 | Plastering in CM 1: 3to 10mm thick including cost and conveyance of all materials to work site and all labour charges and other incidental charges etc., complete. |
17 | Plastering in CM 1:5 to 12mm thick including cost and conveyance of all materials to work site and all labour charges and other incidental charges etc., complete. |
18 | weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc. |
19 | Finishing the top of roof with one course of PRESSED TILES of size 23cm X 23cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight. |
20 | Paving the Floor with Vitrified tiles 600mmx600mmx8mm 93.B41of approved colour, shade and quality in CM 1:3 20mm thick |
21 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
22 | Dadooing of walls with colour glazed tiles of size150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete. |
23 | Granolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc.complete., |
24 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). |
25 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification |
26 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
27 | Fabrication of supply of Mild Steel |
28 | Door D (1.10x2.10) |
29 | Door D1 (0.75x2.10) |
30 | Door D2 (1.00x2.10) |
31 | Rolling Shutter(1.20x2.10) |
32 | Grill Gate(1.20x2.10) |
33 | Window W(1.20x1.30) |
34 | Window W1(1.50x1.30) |
35 | Labour Charges for Fixing the Door including all charges etc., |
36 | Rolling Shutter(1.20x2.10) |
37 | Door (1.10x2.10) |
38 | Door (0.75x2.10) |
39 | Door (1.00x1.80) |
40 | Labour Charges for Fixing the Door including all charges etc., |
41 | Window W(1.20x1.30) |
42 | Window W1(1.50x1.30) |
43 | Supplying & fixingwith cuddapah slabs 20-30mm thick for cup board including all cost and conveyance and all labour charges etc .comp. |
44 | Wash Basin |
45 | Indian Water Closet |
46 | European Water Closet |
47 | RCC Jolly 0.45 x 0.45 |
48 | Supplying and fixingP.V.C rainwater down fall pipe of 110mm dia |
49 | Supplying and fixing of Bevelled Edge Mirror of size 600x450mm with ply wood back and aluminum beading complete complying with standard specification |
50 | Electrical Arrangements |
51 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18 |
52 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 36 |
53 | Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 64 |
54 | Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class " B " ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69 |
55 | Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84 |
56 | Supply and fixing of CFL bulb SD 80 |
57 | Supply and fixing of single box type 4"40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88 |
58 | Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 110 |
59 | Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD EarthingSD 142 |
60 | Supply and fixing of TNEB Meter boardSD 125 |
61 | Provision for E B Deposit charges etc., |
62 | Provision for Photo charges , |
63 | Provision for Name Board |
64 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail