}

Tender For Construction Of A And N Tourist Police Kiosk At Various Spots Of A And N Islands (Near Cellular Jail) Under Sd-Iv, Pbnd, Apwd, Port Blair, blair-Andaman And Nicobar Islands

Andaman Public Works Dept-APWD has published Tender For Construction Of A And N Tourist Police Kiosk At Various Spots Of A And N Islands (Near Cellular Jail) Under Sd-Iv, Pbnd, Apwd, Port Blair. Submission Date for this Tender is 15-12-2022. Kiosk System Tenders in blair Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.




Tender Notice

34945313
Corrigendum : Tender For Construction Of A And N Tourist Police Kiosk At Various Spots Of A And N Islands (Near Cellular Jail) Under Sd-Iv, Pbnd, Apwd, Port Blair
Open Tender
Indian
Andaman And Nicobar Islands
blair
15-12-2022

Tender Details

Construction Of A And N Tourist Police Kiosk At Various Spots Of A And N Islands (Near Cellular Jail) Under Sd-Iv, Pbnd, Apwd, Port Blair

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 01-Dec-2022 Corrigendum Date 07-12-2022
2 08-Dec-2022 Corrigendum-II Date 15-12-2022

Key Value

Document Fees
Refer document
EMD
INR 9338.0 /-
Tender Value
INR 4.66 Lakhs /-

BOQ Items

Name of work : Construction of A & N Tourist Police Kiosk at various spots of A & n Islands(Near Cellular Jail) under SD-IV, PBND, APWD, Port Blair.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
2All kinds of soil
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
41:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
61:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
7Centering and shuttering including strutting, propping etc. and removal of form for
8Foundations, footings, bases of columns, etc. for mass concrete
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
10Thermo-Mechanically Treated bars of grade Fe-500D or more.
11Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
12250x16 mm
13Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
14200x10 mm
15100x10 mm
16Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
17125 mm
18100 mm
19Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
20Providing and fixing bolts including nuts and washers complete.
2112 mm cement plaster of mix :
221:4 (1 cement: 4 fine sand)
23Applying priming coat:
24With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
25Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
26Two or more coats on new work
27Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
28Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
29Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
30Superior hardwood Cart-II (A)
31Providing and fixing wood work in frames of false ceiling, partition etc sawn and put up in position with
32Superior hardwood cat-II (A)
33Providing and fixingplain square edged wooden beading 50 x12 mm section with screws of approved quality for ceiling with
34Superior hardwood cat-II (A)
3525mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :
36Superior hardwood cat-II (A)
37Superior hardwood cat-II (A) (timber shall be issued free of cost by the department)
38Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including stainless steel butt hinges with necessary screws.
3935mm thick Superior hardwood cat-II (A)
40Providing and fixing 6mm thick plywood (Greenply or equivalent confirming to IS 710) ceiling of approved qualitywith necessary nails etc. complete (frame work to be paidseparately):
41Providing and fixing in position eaves or facia board with 12" X 1" (300x25mm) Plank of superior hardwood Cat-II(B) and 30 cm wide including fixing with nuts and bolts etc complete.
42Extra for providing and fixing anodised aluminium wind ties of 40x 5mm flat .(Weight 0.54 kg/m)
43Providing wood work in frames , trusses, purlins, rafters etc sawn and put up in position with Superior hard wood Cat-II (A)
44Providing and fixing 12mm thick Superior hardwood cat-II (A) plank weather boarded walling fixed on frames with necessary nails etc complete as per the direction of Engineer-in charge (excluding the cost of frames which will be paid seperately).
45Fixing woodwork in frames, trusses, purlins, rafter etc sawn and put up inposition with Superior hard wood Cat-II (A) etc complete as per the directions of Engineer-In-Charge (Timber shall be provided by the department free of cost)
46Fixing woodwork in frames, of false ceiling, partition etc sawn and put up inposition with Superior hard wood Cat-II (A) etc complete as per the directions of Engineer-In-Charge (Timber shall be issued by the department free of cost)
47Fixing12mm thick Superior hard wood Cat-II (A) plank weather board walling fixed on frames with necessary nails etc complete as per the directions of Engineer-In-Charge. (Timber shall be issuedfree of cost by the department)
48Fixing woodwork in frames of doors, windows, clerestory windows and other frames, wrought framed with Superior hard wood Cat-II (A) and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastenerof required dia & length shall be paid for separately).(Timber shall be provided free cost by the department)
49Refixing of existing wooden door, window and clerestory window shutters to existing frame with Stainless steel butt hinges and necessary screws wherever necessary etc complete as per the direction of Engineer- in- charge.
50Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equivalent (size, shape and pitch of corrugation as approved by Engineer-In- charge) 0.50mm (+0.50%) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns, sheet should have protective guard film of 25 micron minium to avoid scratches during transportation and should be supplied in single length up to 12 metres or as desired byEngineer-In-Charge. The sheet shall be fixed using self drilling/ self tapping aluminium screws (Xylan) of size (5.5X55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
51"Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equivalent roofing acessories 0.50mm (+0.50%) total coated thickness with aluminium zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping aluminium screws complete."
52Ridge plain(500-600 mm)
53Gutter (600 mm overall girth)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail