}

Tender For Estimate For Conversion Of Overhead Power Lines To Under Round At Hindrance Of Gatee And Baradari Someshwar Mahadev Mandir Arail Prayagraj, prayagraj-Uttar Pradesh

Allahabad Development Authority-ADA has published Tender For Estimate For Conversion Of Overhead Power Lines To Under Round At Hindrance Of Gatee And Baradari Someshwar Mahadev Mandir Arail Prayagraj. Submission Date for this Tender is 03-12-2022. Electrical Maintenance Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

34872870
Tender For Estimate For Conversion Of Overhead Power Lines To Under Round At Hindrance Of Gatee And Baradari Someshwar Mahadev Mandir Arail Prayagraj
Open Tender
Indian
Uttar Pradesh
prayagraj
03-12-2022

Tender Details

Estimate For Conversion Of Overhead Power Lines To Under Round At Hindrance Of Gatee And Baradari Someshwar Mahadev Mandir Arail Prayagraj

Key Value

Document Fees
INR 354 /-
EMD
INR 25000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Estimate for Conversion of Overhead power lines to under round at hindrance of gatee & baradari someshwar mahadevmandir Arail Prayagraj
Sl. No. Item Description
1S/F of factory fabricated and wired metal Glande dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 400 Am. 1 Nos MCCB and outgoing 200 Amp 2 Nos. = 63 Amp 1 Nos cubical type with requiredd busbar as IS 8623 with Insulated Heat Shrink sleeving and mouting on non Hygrscotic suport as CMC/BMC. With 3 No indicator, The Pillar should be fabricatedwith CRCA sheet 2 mm thick Paintedwith High quality Pint with locking arrangement complete with cable Gland complete.
2S/F of TPN/ Telex Feeder Pillar Cubical Box made of 45mm x 45mm x 5mm Angle Iron frame and 14 SWG MS Sbheet with Both side Lockignarrangement. Dust and Vermin Proof consisting with Copper Bus Bar on Henry type Fuse unit on 2 No. 500 Amp and 3 No. 300 Amp. Tailless unit Completethe Box shall be Painted with approvedaluminium Paint over Red Oxide Primer in 1:3:6 CC foundation as directed by E/I.
3S/F of 200 Amp Busbar Box made of 16 SWG CRCA Sheet including TPN Aluminium Busbar complete with locking arrangement with required Clamps nuts & bolts and grouting / .Fixed on Wall (if required on Angle stand angle will be measured in MS Items)
4S/L of Aluminiuum conductor PVC Insulated armoured served sheathed 240Sq mm x 3.5 Core LT cable 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable sie or as directed by the E/I, complete in all respect.
5Same as Above but size 50 Sq mm x 3.5 Core
6S/L of 3 Core standard aluminium conductor XLPE (Cross linked Polyethylene) insualted PVC bedded, Galvanied flat steel strip armored 70 Sqmm 3 Core 11 KV grade cable confirming to I.S. 7098 ( Part-II with latest amendement)at a depoth of 900 mm below ground level ovdr a cushion of 100 mmthick fine rriver. sand al around and protected with well burnt bricks in sides and on top purt across. The armoring of cable shall be properly connected with earth conductorby clamps etc.
7S/F of 70 Sqmm to 120 Sqmm 11 KV Joint Kit complete
8S/F of 240 Sq mm cable Lugs (Item asUPPWD SOR 18)
9S/F of 50 Sq mm cable Lugs (Item asUPPWD SOR 18)
10Trenchles Drilling with HDPE 100 mm dia HDD for carring of Cable on Road Crosing complete with Repairing of all internal water connection/Sever Conne3ction if necessary complete
11Dismantling & Store /Street light Poles /PCC/Rail as per direction of UPPCL with Loading unloading cartage of Pole embedded in brick ballast & CC foundation etc. as required.
12Dismantling of over head lines Wires comprising of copper/aluminium overhead conductor, G.I, wire, cross arms, insulators etc, as Required & Deposite as per direction of UPPCL with Loading unloading cartage of all material with proper listing.
13S/E of ""D"" clamps of 50 mm x 6mm flat iron on steel tubular Poles/steel rail polexwith bolts, nuts etc. complete in all respects including painting with aluminium paint.
14S/F of MS Channel, V shape, Bracing,Angel, Clamps and other required MS Iron Items etc. Rate PSR
15S/F of 100 mm x 110 mm shackle insulator or100 mm x 80 mm Pin insulator including G.I. Bolts/spindle nuts etc.
16S/f of 11 KV Pin insulator complete with Pin, Nuts, & Bolts complete with Gun fiting complete.
17S/f of 11 KV Disc insulator complete with Fittings , Nuts. & Bolts complete with Gun fitting complete
18S/E of Stay set at least 3.5 M. away from the Pole complete with galvanised 19 mm diax 1.80. M. long Sary clamps, stay insulator 19 mm x 600 double screw tightener, 7/4.00 mm G.I. stary wire etc. in 1:3:6; cemtn concrete complete .
19Painting of the electric pole with 2 coats of aluminium paint over red primncer complete in all respect.
20Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc complete.
21S/F of 100 mm dia GIPipe Clas B Make Jindal Complete with required clamping .
22S/F of Dead End Insulated Clamps complete on Poles as direction of E/I.
23S/E of Suspension Insulated Clamps complete on Poles as direction of E/I.
24Removal and Refixing of service Connections complete as per direction of E/I.
25Deduction of Cable Rate during errection in Pipe/Duct ( Duct will be made by civil work Estimate)
26S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. Rate SOR-18
27S/L of 6 Sq mm Twin Flate unarmoured cable complete with proper connections Rate PSR in PDA
28Supply & laying of following50 mm dia (OD-50 mm nominal) DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Ii complete with fitting and cutting. Jointing etc, direct in groudn (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. copete as required.
29Same as above 90 mm dia (OD-90 mm & ID-76 mm nominal) 6 Kg ISI marked alongwith all accessories
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail