Ajmer Vidyut Vitran Nigam Limited-AVVNL has published Tender For Construction Of 2 No R4 Type Qtr At S/D Office Phuliyakalan. Submission Date for this Tender is 05-12-2022. Building Work Tenders in bhilwara Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 23-Nov-2022 | CORRIGENDUM | Date | 05-12-2022 |
2 | 23-Nov-2022 | Date Corrigendum | Date | 05-12-2022 |
Sl. No. | Item Description |
1 | PART A-Building |
2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil |
3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.(A) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
4 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
5 | Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. |
6 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. |
7 | Brick masonary in foundation and plinth with bricks of class designation 75mm Add extra over item No.5.1 for brick work in super structure upto third storey.Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
8 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement :1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size).M-20grade n/ mix |
9 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for :Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam etc. |
10 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Tremo Mechanically treated bars (confirming of relevent IS Code) |
11 | Half brick masonry in superstructure up to third story using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement Cement mortar 1:6 (1-Cement:6-coarse sand). |
12 | Brick work in partition in super structure upto third storey 7cm. thick (brick on edges) using bricks of class designation 75 in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
13 | Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges:Kota stone 25 to 30 mm thick. |
14 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar).Category-A : Kajaria, Jhonson, , Somani make. |
15 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4)Category-A : Kajaria, Jhonson, Somani make |
16 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’30 mm thick |
17 | Providing and fixing fully panelled double leaf shutter for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - "A" and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete :(a) 30mm thickNigeria teak wood grade-I.Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.56mm panels |
18 | Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets complete :25 mm dia |
19 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
20 | Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint. M.S. Sheet 20 S.W.G |
21 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. Window side hung openable. Pin headed 4mm thick glass panels is used instead of 4mm thick plain glass |
22 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. |
23 | P & F bars or other flat welded to windows ventilators etc. |
24 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. |
25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer. |
26 | Painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture togive an even shade including preparation of base with sand papering, primer, putty etc complete in all respect. New work Two or more coats on new work |
27 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
28 | Providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification :--50mm-- |
29 | Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). |
30 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000Sq. Cm : 25 mm thick |
31 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
32 | P&F steel shutters for almirah and ward robs etc with 18mm guage steel including border frame locking arrangment with godrej or equivalent make mortice look with handle including plainting for all inside and outside surface as per destroyed shades with enamel paint including primer coat and fixing with hold fast iron etc |
33 | Making grooves as per design in plaster 10mm to 20mm wide. |
34 | Providing stone slab covering over drains including filling of joints in cement sand mortar 1 : 3 with 35mm thick cement concrete flooring 1 : 2 : 4 mix complete with good finish with :Stone slab 60 to 75mm thick average |
35 | Structural steel work in single section fixed with connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height.In R.S Joist |
36 | Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
37 | Supplyingandfixingdressedsandorotherapprovedstoneshelves,tandsincement mortar 1:3 with fine dressed edges :50mm thick. |
38 | Cutting of construction joint/ longitudinal joint 4 to 6 mm. wide & 75 to 100 mm deep using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealingcompound in groove including cost of sealing compound. |
39 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. (B) M20 grade Nominal Mix (with graded stone aggregate 20mm nominal size). |
40 | Finishing with neat cement (punning). |
41 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.:All kinds of soil |
42 | Earth work in excavation over areas (exceeding 30cm in depth, 1.5 Mtr. in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 5km and with all lift disposed earth to be levelled and neatly dressed:All kind of Soil |
43 | Add Extra ofPillar masonry including bed plates as per specifications, Bed plates to be paid separately |
44 | Providingand fixing Nigeria Ghana Teak wood grade – Imouldings and beadings in droops and windows size :-20x12 mm |
45 | Add extra for Double leaf shutter |
46 | Marble stone flooring table rubbed, 16-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Kesriaji (Rikhabdeo).Above 3601 Cm2 Slabs |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail