}

Tender For Interior Works For Athani Branch, Ernakulam Cpc, Thrissur Region Of Kscb Ltd., athani-Kerala

Kerala State Co-Operative Bank Ltd has published Tender For Interior Works For Athani Branch, Ernakulam Cpc, Thrissur Region Of Kscb Ltd.. Submission Date for this Tender is 29-11-2022. Interior Work Tenders in athani Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

34716240
Tender For Interior Works For Athani Branch, Ernakulam Cpc, Thrissur Region Of Kscb Ltd.
Open Tender
Indian
Kerala
athani
29-11-2022

Tender Details

Interior Works For Athani Branch, Ernakulam Cpc, Thrissur Region Of Kscb Ltd.

Key Value

Document Fees
INR 2360 /-
EMD
INR 35000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Interior works for Athani Branch, Ernakulam CPC, Thrissur Region of KSCB Ltd.
Sl. No. Item Description
1INTERIOR WORKS
2Fully Glazed partitions Supplying and fixing fully glazed partitions for manager cabin. The partitions are made of 12 mm thck glass edges polished for a height of 240 cm from the floor. The glasses are inserted in to the wooden frame work at top and bottom. Partition is made of beech wood ,30 cm x 5 cm at top and 15 cm x 5 cm at bottom finished with melamine polish matt finish.The partition are to be firmly fixed to the ceiling. Measurement for partition will be up to false ceiling from floor level. Etcthing sticker should be proposed as per the drawing.
3Fully Glazed Door Providing and fixing fully glazed doors using toughened glass 12 mm thick for entrance and manager cabin. The frame work with beach wood frame 10 x 5 cm and 15 x 5 cm at top and bottom respectively finished with melamine polish matt finish. Necessary floor springs , 1 pair of SS Dhandle 400 mm length and 250 mm dia to each shutter, lock of approved make etc. to be fixed to the door. The eddges of the glass to be polished. Etching sticker should be provided as per the drawing
4Semi Glazed Solid PartitionSupplying and fixing semi glazed solid partition for manager cabin for a height of 240 cm / false ceiling height . For a height of 90 cm from FL and from 210 cm height to false ceiling level , the inner side frame work is of country wood 5 cm x 3.5cm with verticals and horizontals 60 cm c/c , which is covered with 6 mm thick marine grade plywood (IS 303) on both sides and finished with 1 mm thick lamination. From 90 cm height to 210 cm, 6 mm thick plain glass is to be inserted in grooves made on plywood partition .skirting for a height of 10 cm with 12 mm thick beechwood planks finished is to be provided. the exposed edges of partition where doors are fixed should be sealed with beech wood 7.5 cm x 1.2 cm thick. the partition is to be firmly fixed to the floor and ceiling .Beech wood beading polished and grooves with meamine matt is to be provided as shown in the drawing. Measurement for partition will be FL to false celing level.
5Double Skin Solid PartitionThe partitions are of double skin type for height of 240 cm/ false celing height. The inner side frame work ae of country wood 5 cm x 3.5 cm with verticlas and horizontals 60 cm c/c ,which is covered with 6 mm thick marine plywood IS 303 on both sides an finished with 1 mm thick lamination . Skirting for a height of 10 cm with 12 mm thick beechwood planks finished is to be provided. The exposed edges of partition where doors are fixed should be sealed with beech wood 7.5 cm x 1.2 cm thick. the partition is to be firmly fixed to the floor and ceiling. Beech wood beading polished and grooves with melamine matt is to be provided as shown inthe drawing. Measurement for partition will be up to false ceiling fom floor level.
6Half Partition (Counter)supplying and fixinghalf partition for counters. The total length of the partition is 165 cm. The bottom portion of the partition is of double skin type for a height of 75 cms, the inner side frame work are of country wood 5 cm x 2.5 cm with verticlas and horizontals 60cm c/c ,which is covered with 6 mm thick marine grade plywood IS 303 on both sides and finished with 1 mm thick lamination . partition above 75 cm is firmly fixed with 12 mm thick glass of size 165 cm x 45 cm. All edges lipped with beech wood polishedd with melamine matt finish. the height of partition above table top is 45 cm. the partition is firmly fixed to the floor. the edges of the glass to be polished. all visible wood surface to be edge polished,etc.,completed
7Solid Flush DoorsSupplying and fixing single leaf 32 mm thick solid core flush door shutters. Shutters finished with 1 mm laminate on both sideds. Providing 6 mm thick plain glass vision panel size 20 x 45 cm. Rates including providing necessary fittings such as door closers, bearing hinges, door stopper , 6 lever mortise lock with handles SS finish ,tower bolts ,etc., completed.
8Semi Glazed Door Supplying and fixing semi glazed door for manager cabin. Single leaf40 mm thick solid core flush door shutters up to 90 cm level from FL.Shutters finished with 1mm laminate on both sides.Providing6 mm thick plain glass for remaining height with frames.Including necessary fittings such as door closers,bearing hinges,door stoper, 6 lever mortise lock with handles SS finish, tower bolts, etc., complete.
9TABLES & SIDE TABLES
10Manager"s Table With Drawer Unit The size of table is 180 x 80 x 75 cm. The table top made of 25 mm thick marine ply wood with 1 mm thick laminated finish(hot pressed) and edges finished matching colour edge band tape 2 mm thick. Front and other sides made of 18 mm marine grade IS303 plywood with 1 mm laminated finish for outside.The innersides are painted with 2 coats of enamel paint over a coat of wood primer. Keyboard tray has to be provideed as shown in the drawing are to be made of 12 mm thick marine plywood IS 303. All exposed portions are 1mm thick laminated finish (hot pressed) .Inside portions are painted finish . providing two drawers and one shutters on bottom sliders and necessary fittings such as locks, handle and castor wheels etc. completed.
11Manager"s Side TableThe size of side table is 120 x 45 x 75 cm.The table top made of 25 mm thickmarine ply wood with 1 mm thick laminated finish (hot pressed ) and edges finished matching colour edge band tape 2 mm thick . Front and other sides made of 19 mm plywood with 1 mm laminated finish for outside.the inner sides are painted with 2 coats of enamel paint over a coat of wooden primer . Cupboard door are made of 12 mm thick plywood with outside laminated finish & inside painted finish ,sliding on aluminum channels. one number horizontal rack should be provided with 19 mm thick plywood. All exposed edges should be lipped.
12Cash counter TableProviding cash counters 295 x 60 x 75,table top 60 cm width, ledger top 30 cm width and 35 cm height from table top , front apron and transaction top vertical sides of drawer boxes made of 18 mm plywood with 1 mm lamination finish.ledger top the table top made of 25 mm thick marine ply wood with 1 mm thick laminated finish (hot pressed) and edges finished matching colour edge band tape 2 mm thick. Two drawers, cpu stand, keyboard tray,wire manager, drawer with 19 mm thick marine grade plywood IS303. All exposed faces should be finished with 1 mm thick laminate and inside surfaces should be finished with enamel paint etc. complete.
13Counter TableProvidingcounter table size of 150 x 80 x 75 cm , table top made of 25 mm thick marine ply wood with 1 mm thick laminated finish (hot pressed) and edges finished matching colour edge band tape 2 mm thick. The inner sides are painted wih 2 coats of enamel paint over a coat of wood primer. 12 mm thick plywood is used for key board tray on telescopic sliders. A country wood foot rest of size 7.5 x 2.5 cm is also provided . Provision for cable manager is to be provided. Drawers are made of 19 mm thick plywood and 1 mm thick laminate should be provided on exposed faces. Necessary fittings such as steel slides , godrej lock , handles etc. of approved make are to be provided.
14Side Table ( Cash Counter and cash cabin ) The size of side table is 90 x 45 x 75 cm . The table top made of 25 mm thick marine ply wood with 1 mm thick laminated finish (hot pressed) and edges finished matching colour edge band tape 2 mm thick .Front and other sides made of 19 mm plywood with 1 mm laminated finish for outside. the innersides are painted with 2 coats of enamel paint over a coat of wood primer .Door are made of 12 mm thick plywood with outside laminated finish & inside rack should be provided with 19 mm thick plywood. all exposed should be lipped.
15Locker Room TableThe size of side table is 100 x 45 x 75 cm.the table top made of 19 mm thick marine plywood IS303 with 1 mm thick laminated finish (hot oressing)and matching colour edge band tap hot pressing Front and other sides made of 19 mm plywood with 1 mm laminated finish for outside. the inner sdies are painted with 2 coats of enamel paint over a coat of wood primer.providing one drawer with necessary fittings such as lock, handle, sliders etc. complete.
16Dinning TableThe size of side table is 130 x 80 x 75 cm.the table top made of 19 mm thick marine plywood IS303 with 1mm thick laminated finish (hot oressing)and matching colour edge band tap hot pressing Front and other sides made of 19 mm plywood with 1 mm laminated finish for outside. the inner sdies are painted with 2 coats of enamel paint over a coat of wood primer.providing one drawers with necessary fittings such as lock, handle, sliders etc. complete.
17Wicket Gate Supplying and fixing wicket gate made with country wood frame of size 5 cm - 3 cm alround and intermediates at 60 cm c/c and it is coverded with 6 mm thick plywood on both sides and finished with 1 mm thick laminate. Necessary Teak/Beech wood beadings and grooves in laminate. Providing necessary hinges, tower bolt etc. complete.
18Writing Ledge Providing and fixing writing ledge size about 60 cm long and 30 to 45 cm width to shape at about 105 cm from floor level comprising of 18 mm ply boxing on both sides of 120 cm height and finished with 1mm thick laminate of approved colour and shade. 12 mm clear float glass with edge polished at top bottom and verticals to be fixed on ply boxing with necessary SS "D" bracket.
19Storage The width of the cupboard is 45 cm as shown in the drawing .all other horizontal and vertical partitions are made of 19 mm thickmarine plywood IS 303. the front partition of the cupboard is to be provided with openable shutters 19 mm thick on auto closing hinges, all visible areas finished with 1 mm thick lamination and inside painted with 2 coats of enamel paint over a coat of wood primer as shown in the drawing . multipurpose locks 10 cm SS handles etc.should be provided.
20Plain Gypsum Ceiling Providing and fixing suspended false ceiling, which includes providing and fixing GI wall angle of size 0.4 mm thick having flanges of 25 mm each along with the perimeter of ceiling screw fixed to the brick wall/partition with the help of nylon sleeves and screws at 610 mm centers.then suspending GI load bearing runners of size 18 mm, 0.80 mm thick with two flanges of 30 mm with slots of 20 mm outer and 16 mm inner gap from the soffit at 1220 mm centers,with 8 mm GI rods fixed to the soffit with expansion fastners @ 60 cm c/c.ceiling section of thickness 0.45 mm havung knurald web of 51.50 mm and knurald two flanges of 16 mm each withinward lips of size 5 mm each then fixed to the load bearing runners by inserting into the load slots perpendicular to the load bearing runners at 610 meters centers. 12.5 mm tapered edge india gypsum is then screw fixed to the ceiling section with 25 mm drywall screw at 230 mm c/c. screw fixing is done mechanically either with screwdriver or drilling machine with suitable attachment. Finallythe boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound , and paper tape.rates to be inclusive of finishing including 2 coats of emulsion over putty base.
21Fine Line Gypsum Ceiling ( Grid size 60cmx 60cm) Providing false ceiling frame work with 24/15 mm wide white powder coated galvanized iron T sections at 60 cms center to center both ways ,infill panels made of 0.6 mm aluminum tile hanged on to the ceiling using 4 mm GI wires with necessary bolts, anchor bolts etc.., completed.
22Gypsum CoveSupplying and fixing coves in gypsum board with GI framing. Coves to be 10cm wide and 20cm ht.front facia to be 10 cm wide in Gypsum board.
23Column PanellingThe frame work of column panelling should be of country wood 2.5 cm x 2.5 cm both horizontally and vertically at 60 cm c/c. 6 mm thick marine plywood IS 303 with 1 mm thick lamination.
24Supplying and fixing planter box made of 19 mm marine plywood IS303 finishedd with 1 mm lamination of approvedd colour & design including artificial plant of 35cm height. with prior approval from the bank /architects.
25Providing and fixing vertical blinds of approved make and approved colour etc including all cost complete.
26Providing and fixing in position collapsible MS gate with vertical channel 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top & bottom rails of iron 40 x 4 x 6 mm with 38 mm dia steel pulleys complete with bolts & nuts,locking arrangement ,stoppers,handles.painting 2 coats of synthetic enamel paint over 2 coats of zinc chromate primer.
27Supplying and fixing Notice board 90 cm x 60 cm using 19 mm thick white board in aluminum sections all as per design, detailed drawings etc. complete.
28Supplying and fixing complaint box of size 30 cm x 45 cm x 20 cm using 12 mm thick plywood with alll exposed portions 1 mm thick laminate finish & inside painted with 2 coats of enamel paint over a coat of wood primer as shown in the drawing.
29Supplying and fixing bank logo with lettering for entrance door, logo for manager partition,name stickers for each divisions as per the design and approvel by bank.
30Painting with plastic emulsion paint two coats to inside walls over 2 coats of putty and 1 coat cement primer for walls and ceiling.
31Painting with enamel paint two coat to grills, rolling shutter, etc. complete.
32MISCELLANEOUS WORKS
335mm Mirror (size 60x90cm)
34ELECTRIFICATION WORKS
35Supply and erection of single phase 12 way UPSDB consisting of 40A 2P ELCB+MCB as incomer and 6-16A SPMCB 12 Nos as outgoings,(make Legrant or Havells)
36Supply and erection of 3phase 8 way Vertical Double Door DB with ELR and CBCT consisting of 63A 4P ELCB+MCB as incomer and 2Nos of 63A 4P ELCB+MCB as incomer and 2Nos of 32A TP MCB and 6-32A SP MCB-18 Nos as outgoings.(make Legrant or Havells)
37Suppply and erection of 3phase 4 way phase selector MCB DB consisting of 40A 4P 30mA ELCB+MCB as incomer and 6-16A SP MCB -12 Nos of as out goings.((make Legrant or Havells)
38Supply and laying of 3 runs of 2.5sqmm wire in 20 mm pvc conduit as circuit wiring for nameboard (make Finolex and Havells)
39WIRING
40Supply and laying of 3 runs of 2.5sqmm copper wire in 20mm PVC conduit as circuit mains, including fixing of 3 Nos of 6A socket with 6A switch for UPS power.(Make switch Legrant and wire Finolex or Havells)
41Supply and laying of 3runs of 2.5sqmm copper wire in 20mm PVC conduit as circuit mains, including fixing of 1Nos of 6A socket with 1 nos 6A switch for row power(Make switch Legrant and wire Finolex or Havells)
42Supply and laying of 2 runs of 4sq mm wire along with 1 run of 2.5sqmm wire through 20mm PVC conduit including fixing of 32A DP switch with 25A socket for 1 & 2 TR AC.(Make switch Legrant and wire Finolex or Havells)
43Supply and laying of 3 runs of 4sqmm wire along with 1 run of 2.5sqmm wire through 25mm PVC conduit including fixing of 32A 4P isolator for 3 TR AC.(Make switch Legrant and wire Finolex or Havells)
44Supply and laying of 3 runs of 6sqmm wire through 20mm PVC conduit for UPS unit.(Make switch Legrant and wire Finolex or Havells)
45Supply and erection of 16A socket with 16A switch including wiring by using 3runs of 2.5sqmm wire through 20mm PVC conduit.(Make switch Legrant and wire Finolex or Havells)
46Supply and fixing of 32A 2P MCBisolater withenclosure for UPSinput and output including wiring of 3 runs of 6sqmm wire (Make switch Legrant and wire Finolex or Havells)
47Supply and laying of 3 runs of 4sqmm wire through 20mm conduit for inverter input and output(Make switch Legrant and wire Finolex or Havells)
48Supply and providing 16 A 3 pin top with 3cx2.5sq.mm flexible coppeer cable(Make switch Legrant and wire Finolex or Havells)
49LIGHT FIXTURES
50Supply and erection of 36 W LED 2 "x2" mirror optic luminaire including wiring by using 3 runs of 1.5 sq.mm wire through 20mm pvc conduit as secondary and 3 runs 2.5 sq. mm wire as(Make switch Legrant and wire Finolex or Havells,Fittings Philips ,Wipro, Crompton)
51Supply and erection of 12W LED down lighter including wiring by using 3 runs of 1.5 sq.mm wire through 20mm pvc conduit as secondary and 3 runs 2.5 sq.mm wire as primary circuits
52Supply and erection of 1x28w T5 patty fixtures including wiring by using 3 runs of 1.5 sq.mm wire through 20mm pvc conduit as secondary and 3 runs 2.5 sq.mm wire as primary circuits(Make switch Legrant and wire Finolex or Havells,Fittings Philips ,Wipro, Crompton)
53Supply and erection of 1x14 T5 (2ft) patty fixtures including wiring by using 3 runs of 1.5 sq.mm. wire through 20mm pvc conduit as secondary and 3 runs 2.5 sq.mm wire as primary circuits
54Supply and fixing 1200mm ceiling fan including down rod fan hook, step type fan regulator and wiring by using 3 runs of 1.5 sq.mm wire including fixing of 6A socket(Make switch Legrant and wire Finolex or Havells, Crompton or Bajaj Fan)
55Supply and fixing wall fan including wiring same as light points
56Supply and fixing of 230mm exhaust fan including wiring same as light points (Make switch Legrant and wire Finolex or Havells, Crompton or Bajaj Fan)
57Supplying and fixing of Calling bell including wiring by using 3 runs of 1.5 sq.mm wire through 20mm PVC conduit.(Make switch Legrant and wire Finolex or Havells,)
58CABLING & EARTHING
59Supply and laying of 4x25sq.mm PVC cablewith copper wire 10swgthrough wall from Metering cubicle to MDB including termination
60Supply and laying of 4x10sq.mm PVC A PVC cable through wall from MDB to lighting DB
61Supply and providing 40mm dia 2.5m long GI pipe electrode, inter connection of earth pit and earthing of DBs by using 10swg copper asperin IS3043 1987 including all civil works
62Supply and providing 600*600*3mm copper plate including IS3043 1987 including earthing of UPS by using 10swg copperwire
63DATA & PA SYSTEM WORKS
64Supply and erection of 10 pair crone box with crone connectors
65Supply and laying of CAT - 6 LAN cable through 25mm PVC conduit for including fixing of RJ45 socket jack plate etc.
66Supply and fixing of 1 nos RJ45 jack
67Supply and fixing of 9U rack with all accessories
68Supply and fixing of 24 port patch panel with all accessories including
69Supply and fixing of10/100/1000mbps gigabite switch in the rack
70Supply and providing 1m patchchord
71Supply and providing 2m patchchord
72supply and laying two pair telephone cable with RJ11 socket with box
73PA SYSTEM
74Supply and laying of 2 runs of 1sqmm wire through 20mm PVC conduit for speaker point and including fixing of Ahuja make 4 Nos ceiling speakers
75Supply and fixing of Ahuja make 50W amplifier with USB port
76CCTV
7708 channel Hikivision DVR
78Hikivision IR D/N colour dome camera
791TB HDD
8022"LED moniter acer
81Supply and laying of RG6 cable along with 2 runs of 1sq.mm wire through 20mm PVC conduit for CCTV
82Testing and commisioning
83Inverter 1500VA(Battery Exide, Inverter Luminous,Hykon, )
84AIR CONDITIONING WORKS
85Supply installation testing & commissioning of CARRIER/BLUESTAR make 1TR split AC-3 Star rated with 4 RMT Copper pipe,4 RMT PVC Drain pipe,4KVA V guard make stabilizer and ordinary stand
86a) Supply installation testing & commissioning of CARRIER/BLUESTAR make 2TR split AC-3 Star rated with 4 RMT Copper pipe,4 RMT PVC Drain pipe,4KVA V guard make stabilizer and ordinary stand
87b) Supply installation testing & commissioning of CARRIER/BLUESTAR make 3TR split AC-3 Star rated with 4 RMT Copper pipe,4 RMT PVC Drain pipe,4KVA V guard make stabilizer and ordinary stand
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail