Military Engineer Services-MES has published Tender For Misc Br Repair To Guard Room Sentry Post At North Zone Area Including Repair To Joinery Chajja Plinth Protection Plumbing Work In Md Accn Area At Akhnoor Under Ge N Akhnoor. Submission Date for this Tender is 19-11-2022. Building Work Tenders in akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Oct-2022 | BOQ Revised | BOQ | 12-11-2022 |
| 2 | 12-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-11-2022 |
| 3 | 18-Nov-2022 | Amendment | Other | 19-11-2022 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description including raking outjoints, hacking for key, scrubbing down with water etcall as specified and as directed by Engineer -in-Charge. |
| 2 | Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 3 | Rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed. |
| 4 | Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 5 | Rendering 15mm thick (incl dubbing coat) on external wall surfaces (ht upto 7.5m from ground level) in cement mortar 1:4 finished fair and even without using extra cement as in roof projection/chajjas/facia incl soffit of chajjas finished even and smooth (without using extra cement) incl two coats of appex emulsion over one coat of primer, complete all as specified. Note : (i)Rate quoted are deemed to include double scaffolding. |
| 6 | Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 7 | -Ditto- all as per Srl Item No. 6 here-in-before, but on ceiling |
| 8 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 9 | Applying 1mm thick wall care putty complete all as specified. |
| 10 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 11 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper complete all as specified and as directed. |
| 12 | -ditto- all as per item No 11here-in-before, but one coat of cement base paint. |
| 13 | Preparation ofold painted steel surfaces of any descriptionexc 10 cm width or girth, applying one coat of synthetic enamel paint complete all as specified. |
| 14 | -ditto- all as per item No 13 here-in-before but in wooden surfaces. |
| 15 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed by Engineer-in-Charge. |
| 17 | 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in levelling cousre all as specified. |
| 18 | 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified. |
| 20 | Ditto all as per item No 19 here-in-before but area exc0.18 Sqm but n. exc 0.36 Sqm. |
| 21 | Glazed ceramic tile 450x350x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified. |
| 23 | PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed. |
| 24 | Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 25 | 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed in repairs, all as specified. |
| 26 | PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 27 | M&L for Stainless steel gratings 100/125mm dia fixed with cement motar. |
| 28 | S&F in repair waste pipe for WHB/Urinal for 32/40mm dia all as specified & as directed. |
| 29 | 15mm bore tubes, medium grade, galvanised with and including all fittings fixedto walls, floors, or ceiling or laid in floors etc complete including taking down old pipe all as specified. |
| 30 | -Ditto- all as per item No 29 here in before but 20mm bore. |
| 31 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge. |
| 32 | -Ditto- all as per item No 31 here- in- before but 20 mm bore. |
| 33 | Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified. |
| 34 | Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified. |
| 35 | Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe15 mm bore, supplied andfixed in repairs,complete all as specified. |
| 36 | S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe20 mm dia (minimum weight 210 gms) complete all as specified. |
| 37 | Rotational moulded polyethylene water storage tanks(triple layer) of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified. |
| 38 | Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified. |
| 39 | -Ditto- all as per Srl item No. 38here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each |
| 40 | Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge |
| 41 | Taking down and refixing incl resecuring and easing shutters areaexceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and as directed by Engineer-in-Charge. |
| 43 | PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed by Engineer-in-Charge. |
| 44 | PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etccomplete all as specified and as directed by Engineer-in-Charge. |
| 45 | 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified. |
| 46 | 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified. |
| 47 | Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified. |
| 48 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined togetherwith solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified. |
| 49 | Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 50 | 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 51 | 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 53 | 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame withside hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 8mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1302/2009 Sh no 1/1 to 1/3 . |
| 55 | All as per item No 54here-in-before but without glazing bars shutter only. |
| 56 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified. |
| 57 | 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 58 | All as per item No 57here-in-before but figured (frosted) glass. |
| 59 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified. |
| 60 | All as per the description of item No.59 here in before but fixed in repair. |
| 61 | Preparation ofnewsteel surfaces of any descriptionexc 10 cm width or girth, priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 62 | ditto- all as per item No 61 here-in-above but as in new wooden surfaces |
| 63 | S&F 110mm dia PVC (SWR)(type B or 6 kgf/Sgcm) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 64 | ditto- all as per item No 63 here-in-above but 75mm dia |
| 65 | ditto- all as per item No 63 here-in-above but fixed on wall |
| 66 | ditto- all as per item No 64 here-in-above but fixed on wall |
| 67 | S&F 75mm dia PVC (SWR) bends any radius with access door all as specified. |
| 68 | S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal with access door all as specified. |
| 69 | Demolition of brickwork or stone boulder masonarybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer -in-Charge. |
| 70 | Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cementsand mortar 1:6 complete all as specified and as directed by Engineer -in-Charge. |
| 71 | -Ditto- all as per Srl item No. 70 here-in-before, but except bricks. |
| 72 | S&F in repairVitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) completefixed in repair, all as specified and as directed. |
| 73 | 15mm bore tubes, medium grade, galvanised with and including all fittings fixedto walls, floors, or ceiling or laid in floors etc complete including taking down old pipe all as specified and as directed by Engineer-in-Charge. |
| 74 | -Ditto- all as per item No 73 here in before but 20mm bore. |
| 75 | Repair to balcony/Facia and soffit of chajjas etc by taing sown old rendering 20 to 25mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including formwork up to height 6.5 mtr above ground level og bldg complete all as specified. |
| 76 | Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S & F factory made 30 mm thick ,Flush shutters, solid core construction, with block board core and plywood face panels, one face is covered with 5 mm thick pvc sheet and other face is covered with decorative face veneer with lipping/frame to match the surface etc complete all as specified & as directed by Engineer-in-Charge. |
| 78 | Preparaing old surface (plastered or unplastered)surfaces of walls includingcornices, pilasters etc by washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of white wash on walls, complete all as specified and as directed by Engineer-in-charge |
| 79 | All as per srl item no.78 here in before but two coats of white wash including compete removal of existing treatment. |
| 80 | All as per srl item no 78 here in before one coat on ceiling. |
| 81 | Preparation of old decorated surfaces including brooming down or steel wire brushing ,scraping down smoke soot, moulds,moss and efforescent salts and removing oil and greasy spots and applying one coat of cement base paint on walls all as specifiedand directed by Engr-in-Charge. |
| 82 | M&L Glazed ceramic tile 300 x 200 x 06-7mm thick (coloured)on vertical surfaces such asdados , patches etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 83 | Repair to wall tiling in patches by Glazed ceramic tile , area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed. |
| 84 | Repair to floor tiling in patches by non-skid ceramic tile , area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed. |
| 85 | S & F CP Brass wall mixture with Telephonic shower arrangement for mixing hot cold water supply screwed down incl connecting legs & wall flanges for iron pipe 15mm dia bore fancy type in repair complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
