}

Electrification With Allied Accessories For Extension / Alteration Of Lecturer Halls For Augmentation Of Seating Capacity At Skims Mch Bemina E= 1 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Ins, bemina-Jammu And Kashmir

Rural Development and Panchayat Raj Department has published Electrification With Allied Accessories For Extension / Alteration Of Lecturer Halls For Augmentation Of Seating Capacity At Skims Mch Bemina E= 1 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Ins. Submission Date for this Tender is 11-10-2022. Brushes Tenders in bemina Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

34139829
Electrification With Allied Accessories For Extension / Alteration Of Lecturer Halls For Augmentation Of Seating Capacity At Skims Mch Bemina E= 1 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Ins
Open Tender
Indian
Jammu And Kashmir
bemina
11-10-2022

Tender Details

Electrification With Allied Accessories For Extension / Alteration Of Lecturer Halls For Augmentation Of Seating Capacity At Skims Mch Bemina E= 1 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Singlecorecableinsurface / Recessed Partly In Mediumclasspvc Conduit And Partly In Pvc Channel, Withpianotypeswitch, Phenoliclaminatedsheet, Suitable Size M.S. Box, Fan Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 2 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduite As Required. 3 3 X 2.5 Sq. Mm Wire 4 3 X 4 Sq. Mm Wire 5 3 X 6 Sq. Mm Wire 6 Supplying And Fixing Of 25 Mm Sizes Of Medium Class Pvc Conduit Alongwithaccessoriesin Recessincluding Cutting The Wall And Making Good Completeas Required ( For 15 / 16A Socket Out Let And Circuit Wires Mains And Sub-Mains. ) 7 Supplying And Fixing Of 25 Mm Size 2 Mm Thick Of Double Locked Channel For Light Points, Power Points And Circuit Wires. 8 Supplying And Fixing Metal Box Of 180Mm X 100Mm X 60Mm Deep ( Nominal Size ) On Surface Or In Recess With Suitable Size Ofphenolic Laminated Sheet Cover In Front Including Providing And Fixing One No. 6 Pin 5 / 6 &One No. 15 / 16 A Socket Outlet And 15 / 16 A Piano Type Switch, Connections, Painting Etc. As Required. 9 P / F Of Led4feet Long Batten Crca Housing For Efficient Heat Dissipation With Built-In Electronic Driver Having Thd <10% , 6000 / 6500Kwith Minimum Sytem Lumens 4000 And Wattage 40 , System Lumen Efficacygreater Than 110 Lm / Watt, Surge Proctection 2Kv Or More Including Connection With Multistrand Copper Conductor 3 Core Cable Etc As Required At Sitewith Burning Hours Greater Than 50000 Hours. 10 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Ceiling Fan With Brush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod With Fan Hook Etc. 2Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value ( Cmm / W ) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm ( Tolerance As Per Is : 374-2019 ) , Thd Less Than 10% And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C ( Max. ) , Insulationresistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 11 Providing And Fixing Of Switch Type Fan Regulater Stepped Type Completed As Required. 12 Supplying And Fixing Of 8 Way Single Pole And Netural Sheet Steel, Mcb Disreibution Board, 240V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required ( But Without Mcb ) . 13 Supplying And Fixing Single Pole 5 A To 32 Arating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Singlepoles In The Existing / Newmcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 14 Single Pole 15 Double Pole 32A ( 4 No For New Db And 8 No In Existing Main Db )

Key Value

Document Fees
INR 500 /-
EMD
INR 7680.0 /-
Tender Value
INR 3.84 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail